Antti Korhonen
Professor at Aalto University School of Business
Schools
- Aalto University School of Business
Links
Biography
Aalto University School of Business
Research Interests:
- Sheet metal forming processes
- Formability and forming limits
- Constitutive models for plasticity
- Forming and formability of stainless steels
- Numerical simulation and modelling of metal forming processes
- Rolling of metals
- Thin films and hard coatings
- Plasma nitriding and heat treatment
- Nanostructured metals
Peer-reviewed scientific articles
Journal article-refereed, Original researchOn the work-hardening of AA 3104 aluminum alloy
Korhonen, Antti S.2013 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495The Influence of Austenite Stability on Latge-strain Kinematic Hardening of Austenitic Stainless Steel steel research international
Manninen, T.; Myllykoski, P.; Korhonen, Antti2012 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Forming and Fracture Limits of Two Metastable High-strength Austenitic Stainless Steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari2011 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683Forming and fracture limits of aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki2011 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836Plastic deformation of solderless press-fit connectors
Manninen, T.; Kanervo, K.; Revuelta, A.; Larkiola, J.; Korhonen, A.S.2007 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Logistics from IMS towards virtual factory
Cser, L.; Cselenyi, J.; Geiger, M.; Mäntylä, M.; Korhonen, A.S.2000 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Surface Engineering with Light Alloys - Hard Coatings, Thin Films and Plasma Nitriding
Korhonen, A.; Harju, E.2000 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495Formation of a wear resistant non-metallic protective layer on PVD-coated cutting and forming tools
Harju, E.; Kivivuori, S.; Korhonen, A.S.1999 in Surface & Coating Technology (Springer New York)Structure investigations of wear reducing non-metallic layers on TiN-coated HSS turning tools
Harju, E.; Korhonen, A.S.; Adamik, M.; Barna, P.B.1999 in Surface & Coatings Technology (Springer New York)The role of neural networks in the optimisation of rolling processes
Larkiola, J.; Myllykoski, P.; Korhonen, A.; Cser, L.1998 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Suomalaisia kokemuksia yliopistojen ja teollisuuden välisestä yhteistyöstä materiaalitieteessä ja fysikaalisessa metallurgiassa
Sulonen, M.S.; Korhonen, A.S.1997 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Effect of the heat-transfer coefficient in ring-compression test
Andersson, K.; Kivivuori, S.; Korhonen, A.S.1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Effect of work material composition on the wear life of TiN-coated tools
Harju, Esko; Korhonen, A.S.; Laizhu, Jiang; Ristolainen, E.1996 in Surface and Coating Technology (Elsevier BV)Levynmuovaajat kokoontuivat Unkarin helteessä
Korhonen, A.1996 in Ohutlevy (Elsevier BV)Muovausmenetelmät ja materiaalit, joilla auton painoa voidaan vähentää
Korhonen, Antti; Hayashi, H.1996 in Ohutlevy (Elsevier BV)Prediction of rolling force in cold rolling by using physical models and neural computing
Larkiola, J.; Myllykoski, P.; Nylander, J.; Korhonen, A.S.1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Uusia mikroskopiatekniikoita kehitetään Teknillisessä korkeakoulussa
Penttinen, I.; Korhonen, A.S.1995 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Corrosion of thin hard PVD coatings
Korhonen, A.1994 in VACUUM (Elsevier Limited)Corrosion behavior of decorative car parts and outdoor lighting fixtures fabricated from TiN-coated stainless steel
Pischow, Kaj; Eriksson, L.; Korhonen, A.S.; Forsen, O.; Turkia, M.; Ristolainen, E.O.1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Ion beam etching technique in the preparation of samples for cross-sectional microscopy studies of thin films and hard coatings
Pischow, Kaj; Korhonen, A.S.; Adamik, M.; Barna, P.B.1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Cross-section X-scanning force microscopy analysis of different hard coatings and thin films
Pischow, Kaj; Adamik, M.; Barna, P.B.; Korhonen, A.S.1994 in Journal of Vacuum Science and Technology. Part B. Microelectronics and Nanometer Structures (Elsevier Science)Comparison of two commercial FEM codes in cold extrusion simulation
Reinikainen, Tommi; Welo, T.; Korhonen, A.S.; Kivivuori, Seppo1994 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Teräslevyn repeilystä ongelmia television kuvaputken kehysten taivutuksessa
Korhonen, A.1993 in Ohutlevyuutiset (Elsevier BV)Teräksen sinkki- ja alumiinipinnoitteet
Korhonen, A.1993 in Ohutlevyuutiset (Elsevier BV)Lävistys- ja leikkaustyökaluista
Korhonen, A.1993 in Ohutlevyuutiset (Elsevier BV)Tutkaheijastuksen vähentäminen levykonstruktioissa
Korhonen, A.1993 in Ohutlevyuutiset (Elsevier BV)Effects of Voltage Pulses on Precipitates During Scanning Tunneling Microscopy Studies
Pischow, Kaj; Korhonen, A.S.1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)Scanning Tunneling Microscopy Study of Precipitates in a Microalloyed Steel
Pischow, Kaj; Haraldsen, A.K.; Korhonen, A.S.1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)The influence of titanium interlayers on the adhesion of PVD TiN coatings on oxidized stainless steels substrates
Pischow, Kaj; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)The Influence of Titanium Interlayers on the Adhesion of PVD TiN Coating on oxidized Stainless Steel Substrates
Pischow, K.A.; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Nopeutetun jäähdytyksen laitteisto ja sen käyttö tutkimustyössä
Ranta, Heikki; Korhonen, Antti1993 in Teräspalat (Elsevier Science)Computer-aided modeling of a new copper extrusion process
Reinikainen, Tommi; Korhonen, A.S.; Andersson, Klas; Kivivuori, S.1993 in Annals of the CIRP (Elsevier Science)Finite-element analysis of copper extrusion processes
Andersson, K.; Kivivuori, S.; Korhonen, A.S.; Reinikainen, Tommi1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Formability and Corrosion Resistance of TiN-coated Stainless Steel Sheet
Harju, E.; Korhonen, Antti; Pischow, K.; Eriksson, Leif1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Hot wear resistance of TiN-coated mould and tool materials
Kivivuori, S.O.; Korhonen, A.S.; Pishow, Kaj1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Superplastinen muovaus - levynmuovauksen erikoismenetelmä
Korhonen, A.1992 in Ohutlevyuutiset (Elsevier BV)Comparison of the Corrosion Resistance of TiN and (Ti, Al)N coatings
Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Uusia materiaaliratkaisuja auton teräksisten levypyörien valmistukseen
Korhonen, A.1992 in Ohutlevyuutiset (Elsevier Science)Pidätyspaineen säätäminen syvävedossa
Korhonen, A.1992 in Ohutlevyuutiset (Elsevier Science)Comparison of the corrosion resistance of TiN and (Ti,Al)N coatings
Penttinen, I.; Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Book section, Chapters in research booksApplication of forming simulation in the post-buckling analysis of cold-formed stainless steel columns
Manninen, Timo; Korhonen, A.S.; Larkiola, J.2003 Modelling of deep drawing of stainless steel
Manninen, T.; Larkiola, J.; Korhonen, Antti2002 Three-dimensional numerical modeling of continuous extrusion
Manninen, T.; Ramsay, P.; Korhonen, Antti2002 Modeling and optimization of metal forming processes
Manninen, T.; Larkiola, J.; Czer, L.; Revuelta, A.; Korhonen, Antti2002 Editors Preface
Seeger, A.; Korhonen, Antti2002 Data Mining in Metalforming.New Possibility in Tool Life Analysis?
Cser, L.; Korhonen, Antti2001 Modelling and optimisation of thermomechanical processing of metals
Myllykoski, P.; Larkiola, J.; Ahokainen, T.; Korhonen, A.; Cser, L.1999 Conference proceedingsForming and fracture limits of an aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki; Koivunen, Petri2010 ISBN: 0-9659463-2-0Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari2010 ISBN: 978-3-85125-108-1Comparsion of Forming and Fracture Limits of an Aluminum Alloy and Austenitic Stainless Steel
Korhonen, A; Manninen, T.; Yoon, J.-W.; Larkiola, J.2009 On the forming and fracture limits of sheet metals
Korhonen, A.; Manninen, T.; Yoon, J.-W.2009 Comparison of forming and fracture limits of an aluminum alloy and austenitic stainless steel
Korhonen, A.; Manninen, T.; Yoon, J.-W.; Larkiola, J.2009 Large-Strain Bauschinger Effect in Austenitic Stainless Steel Sheet,
Manninen, T.; Myllykoski, P.; Taulavuori, T.; Korhonen, A2009 Severe Plastic Deformation (SPD) Processes for Metals
Azushima, Akira; Kopp, Reiner; Korhonen, Antti; Yang, D.Y.; Micari, Fabrizio; Lahoti, G.D.; Groche, Peter; Yanagimoto, Jun; Tsuji, N.; Rosochowski, Andrzej; Yanagida, Akira2008 Forming and fracture criteria for austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo2008 Comparison of two commercial FE codes for sheet metal forming
Revuelta, A.; Kanervo, K.; Myllykoski, P.; Larkiola, J.; Korhonen, A.S.2007 ISBN: 978-0-7354-0415-1ISSN: 0094-243XHardening models for austenitic stainless steels
Kanervo, K.; Manninen, T.; Korhonen, A.S.2006 On formability and forming limits of austenitic stainless steels
Kanervo, K.; Manninen, T.; Larkiola, J.; Korhonen, A.S.2006 ISBN: 83-89541-66-1Plastic deformation of solderless press-fit connectors
Manninen, Timo; Kanervo, Kalle; Revuelta, A.; Larkiola, J.; Korhonen, Antti2005 ISBN: 88-87331-74-XFlash formation in continuous extrusion
Manninen, Timo; Ramsay, P.; Korhonen, Antti2005 ISBN: 973-27-1175-2Deep drawing of double bowl kitchen sinks of stainless steel
Häkkinen, E.; Korhonen, A.; Manninen, T.; Toivanen, T.; Tarkiainen, R.2000 Process State Monitoring Based on Data Mining in Hot Rolling
Cser, L.; Korhonen, A.S.; Simula, O.; Ruha, P.1999 Data mining in improving the geometric quality parameters of hot rolled strips
Cser, L.; Korhonen, A.S.; Mäntylä, P.; Simula, O.1999 Uj modszerek a meleghengerlesi folyamatok elemzeseben es a folyamatkövetesben
Cser, L.; Korhonen, A.S.; Gulyas, J.; Reiss, G.; Myllykoski, P.; Larkiola, J.1999 Data Mining and State Monitoring in Hot Rolling
Cser, L.; Korhonen, A.S.; Gulyas, J.; Mäntylä, P.; Simula, O.; Reiss, G.; Ruha, P.1999 Notes on the history of iron and steel making and processing
Korhonen, A.1999 Metals replacing ceramics in catalytic converters
Korhonen, A.1999 Predicting and modelling flatness with neural networks
Larkiola, J.; Korhonen, A.; Cser, L.1999 A Three Dimensional Finite Element Analysis of Hot Forging a Part for the Automotive Industry
Andersson, K.; Katajarinne, T.; Kivivuori, S.; Korhonen, A.S.1998 Application of Neural Networks for Modelling of Rolling and Annealing of Steel Strip
Cser, L.; Korhonen, A.S.; Larkiola, J.; Myllykoski, P.; Simula, O.1998 Application of neural networks in rolling of steel
Korhonen, A.; Larkiola, J.1998 Application of neural networks in analysis of formability and flatness of steel strips
Myllykoski, P.; Larkiola, J.; Korhonen, A.S.1998 Finnish experiences on university - industry collaboration in materials science and physical metallurgy
Korhonen, A.S.; Sulonen, M.S.1997 Effect of work material composition on the cutting performance of PVD TiN-coated tools
Korhonen, A.1997 Determining tandem cold rolling efficiency using physical models and neural computing
Larkiola, J.; Nylander, J.; Myllykoski, P.; Korhonen, A.S.1996 Investigations of surface morphology, friction, elasticity and adhesion by SFM: Examples from metallurgy, polymers and biology
Leijala, A.; Penttinen, I.; Korhonen, A.S.1996 Applications of scanning force microscopy
Leijala, A.; Penttinen, I.; Korhonen, A.S.; Utriainen, M.1996 Prediction of the friction coefficient in cold rolling by neural computing
Myllykoski, P.; Nylander, J.; Korhonen, A.S.1995 Finite-Element Modelling of Metal Forming Processes
Andersson, K.; Korhonen, A.S.1994 Calculation of the Hardness Distribution in Cooled Steel Products
Kivivuori, S.; Korhonen, A.S.1994 Hydromekanisk formgivning
Eriksson, Leif; Korhonen, Antti1993 Profilvalsning-kontrol av processparametrar genom töjningnivåberäkningar
Larkiola, Jari; Eriksson, Leif; Häkkinen, Erkki; Korhonen, Antti1993 Experiments on the Modelling of Profile in the Cold Rolling of Strips
Larkiola, Jari; Nylander, J.; Korhonen, A.S.1993 Recycled cold-forged steels
Penttinen, Ilkka; Kivivuori, S.; Korhonen, A.S.1993 The Effects of different Interlayers on the Corrosion and high temperature oxidation behavior of TiN Coated Steel Samples
Pischow, K.A.; Korhonen, A.S.Ristolainen; Rossi, F.; Datta, P.K.1993 STM and SIMS Analysis of the Interfaces and Intermediate Layers of TiN/Ti/Substrate Systems
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1993 Elevated Temperature Wear Surface of Some Mould Materials Studied by STM and SIMS
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1993 SFM and SIMS study of tribofilms growing on TiN coatings during an elevated temperature wear test
Pischow, Kaj; Korhonen, A.S.; Ristolainen, E.O.1993 Depth Profiling with STM
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1993 STM and SIMS Study of Tribofilms Growing on TiN Coatingh during and elevated Temperature
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1993 Study of Tribofilms Growing on TiN Coatingh during an Elevated Temperature Wear Test
Pischow, K.A.; Korhonen, A.S.; Ristolainen, Eero O.1993 A Study of Scale-Effects During Accelerated Cooling
Ranta, Heikki; Larkiola, J.; Korhonen, A.S.; Nikula, A.1993 Prediction of the hardness of a hot-forged steel product
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Computer Aided Forging Die Design Based on the Simulation of Metal Flow
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Numerical prediction of the mechanical properties of a microalloyed steel and low-carbon forging steel after controlled cooling
Kivivuori, S.; Andersson, Klas; Korhonen, A.S.; Ollilainen, V.1992 Simulation of cold roll forming
Larkiola, Jari; Eriksson, L.; Korhonen, A.S.1992 The Effects of Prolonged Scanning on the Oxidized Stainless Steel Substrate during Scanning Tunneling Microscopy
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1992 The Influence of Sputtering Time and Tatanium Interlayers on the Adhesion of PVD TiN Coating on Stainless Steel Substrate
Pischow, K.A.; Ristolainen, E.O.; Eriksson, I.; Harju, E.; Korhonen, A.S.1992 Simulation of copper extrusion by using Finite-element method
Reinikainen, Tommi; Kivivuori, S.; Korhonen, A.S.1992 Comparison of two commercial FEM codes in metal forming simulations
Reinikainen, Tommi; Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Non-refereed scientific articles
Unrefereed conference proceedingsForming and fracture limits of aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki2011 Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari2011 Publications intended for professional communities
Article in professional journalForming and fracture limits of austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen (ELSEVIER SCIENCE SA LAUSANNE)Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in Plasticity (ELSEVIER SCIENCE SA LAUSANNE)Large-Strain Baushinger Effect In AISI 301 Type Austenitic Stainless Steel Sheet
Manninen, Timo; Taulavuori, Tero; Myllykoski, Pirkka; Korhonen, Antti2008 in The 9th International Conference on Technology of Plasticity (ICTP 2008) (ELSEVIER SCIENCE SA LAUSANNE)Saksassa tutkitaan uusia levynmuovausmenetelmiä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Levynmuovaajat koolla Colmarissa Ranskassa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Räätälöityjä levyaihioita teräksestä ja alumiinista
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Ruostumaton teräsohutlevy korvaa keraameja auton katalysaattorissa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Kevyitä rakenteita jäykistä monikerroslevyistä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Published development or research reportOhutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia
Korhonen, Antti; Larkiola, Jari2012 Biennial report 1993-94
Korhonen, Antti1995 Biennial report 1991-92
Korhonen, A.1993 Terästen kontrolloitu valssaus ja nopeutettu jäähdytys KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti1993 Controlled rolling and accelerated cooling of steel, KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti; Partinen, Seija1993 Tillämpning av FEM vid varmvalsning
Haraldsen, Ane Kristin; Ranta, N.N.; Malinen, N.N.; Korhonen, A.S.1992 The Use of STM and SIMS in the Study of the Interlayers and the Interfaces in TiN Hard Coatings
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1992 The Reactions of the Interlayer between PVD TiN Coating and Oxidized Stainless Steel Substrate
Pischow, K.A.; Korhonen, A.S.; Barna, P.A.; Ristolainen, E.O.1992
On the work-hardening of AA 3104 aluminum alloy
Korhonen, Antti S.
2013 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495
The Influence of Austenite Stability on Latge-strain Kinematic Hardening of Austenitic Stainless Steel steel research international
Manninen, T.; Myllykoski, P.; Korhonen, Antti
2012 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683
Forming and Fracture Limits of Two Metastable High-strength Austenitic Stainless Steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2011 in STEEL RESEARCH INTERNATIONAL (VERLAG STAHLEISEN MBH)ISSN: 1611-3683
Forming and fracture limits of aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki
2011 in MATERIALS SCIENCE AND TECHNOLOGY (MANEY PUBLISHING)ISSN: 0267-0836
Plastic deformation of solderless press-fit connectors
Manninen, T.; Kanervo, K.; Revuelta, A.; Larkiola, J.; Korhonen, A.S.
2007 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093
Logistics from IMS towards virtual factory
Cser, L.; Cselenyi, J.; Geiger, M.; Mäntylä, M.; Korhonen, A.S.
2000 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Surface Engineering with Light Alloys - Hard Coatings, Thin Films and Plasma Nitriding
Korhonen, A.; Harju, E.
2000 in JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (Springer New York)ISSN: 1059-9495
Formation of a wear resistant non-metallic protective layer on PVD-coated cutting and forming tools
Harju, E.; Kivivuori, S.; Korhonen, A.S.
1999 in Surface & Coating Technology (Springer New York)Structure investigations of wear reducing non-metallic layers on TiN-coated HSS turning tools
Harju, E.; Korhonen, A.S.; Adamik, M.; Barna, P.B.
1999 in Surface & Coatings Technology (Springer New York)The role of neural networks in the optimisation of rolling processes
Larkiola, J.; Myllykoski, P.; Korhonen, A.; Cser, L.
1998 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Suomalaisia kokemuksia yliopistojen ja teollisuuden välisestä yhteistyöstä materiaalitieteessä ja fysikaalisessa metallurgiassa
Sulonen, M.S.; Korhonen, A.S.
1997 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Effect of the heat-transfer coefficient in ring-compression test
Andersson, K.; Kivivuori, S.; Korhonen, A.S.
1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Effect of work material composition on the wear life of TiN-coated tools
Harju, Esko; Korhonen, A.S.; Laizhu, Jiang; Ristolainen, E.
1996 in Surface and Coating Technology (Elsevier BV)Levynmuovaajat kokoontuivat Unkarin helteessä
Korhonen, A.
1996 in Ohutlevy (Elsevier BV)Muovausmenetelmät ja materiaalit, joilla auton painoa voidaan vähentää
Korhonen, Antti; Hayashi, H.
1996 in Ohutlevy (Elsevier BV)Prediction of rolling force in cold rolling by using physical models and neural computing
Larkiola, J.; Myllykoski, P.; Nylander, J.; Korhonen, A.S.
1996 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Uusia mikroskopiatekniikoita kehitetään Teknillisessä korkeakoulussa
Penttinen, I.; Korhonen, A.S.
1995 in Vuoriteollisuus - Bergshanteringen (Vuorimiesyhdistys-Bergsmannaföreningen r.y.)Corrosion of thin hard PVD coatings
Korhonen, A.
1994 in VACUUM (Elsevier Limited)Corrosion behavior of decorative car parts and outdoor lighting fixtures fabricated from TiN-coated stainless steel
Pischow, Kaj; Eriksson, L.; Korhonen, A.S.; Forsen, O.; Turkia, M.; Ristolainen, E.O.
1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Ion beam etching technique in the preparation of samples for cross-sectional microscopy studies of thin films and hard coatings
Pischow, Kaj; Korhonen, A.S.; Adamik, M.; Barna, P.B.
1994 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Cross-section X-scanning force microscopy analysis of different hard coatings and thin films
Pischow, Kaj; Adamik, M.; Barna, P.B.; Korhonen, A.S.
1994 in Journal of Vacuum Science and Technology. Part B. Microelectronics and Nanometer Structures (Elsevier Science)Comparison of two commercial FEM codes in cold extrusion simulation
Reinikainen, Tommi; Welo, T.; Korhonen, A.S.; Kivivuori, Seppo
1994 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Teräslevyn repeilystä ongelmia television kuvaputken kehysten taivutuksessa
Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)Teräksen sinkki- ja alumiinipinnoitteet
Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)Lävistys- ja leikkaustyökaluista
Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)Tutkaheijastuksen vähentäminen levykonstruktioissa
Korhonen, A.
1993 in Ohutlevyuutiset (Elsevier BV)Effects of Voltage Pulses on Precipitates During Scanning Tunneling Microscopy Studies
Pischow, Kaj; Korhonen, A.S.
1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)Scanning Tunneling Microscopy Study of Precipitates in a Microalloyed Steel
Pischow, Kaj; Haraldsen, A.K.; Korhonen, A.S.
1993 in MATERIALS CHARACTERIZATION (Elsevier Inc.)The influence of titanium interlayers on the adhesion of PVD TiN coatings on oxidized stainless steels substrates
Pischow, Kaj; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.
1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)The Influence of Titanium Interlayers on the Adhesion of PVD TiN Coating on oxidized Stainless Steel Substrates
Pischow, K.A.; Eriksson, L.; Harju, E.; Korhonen, A.S.; Ristolainen, E.O.
1993 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Nopeutetun jäähdytyksen laitteisto ja sen käyttö tutkimustyössä
Ranta, Heikki; Korhonen, Antti
1993 in Teräspalat (Elsevier Science)Computer-aided modeling of a new copper extrusion process
Reinikainen, Tommi; Korhonen, A.S.; Andersson, Klas; Kivivuori, S.
1993 in Annals of the CIRP (Elsevier Science)Finite-element analysis of copper extrusion processes
Andersson, K.; Kivivuori, S.; Korhonen, A.S.; Reinikainen, Tommi
1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Formability and Corrosion Resistance of TiN-coated Stainless Steel Sheet
Harju, E.; Korhonen, Antti; Pischow, K.; Eriksson, Leif
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Hot wear resistance of TiN-coated mould and tool materials
Kivivuori, S.O.; Korhonen, A.S.; Pishow, Kaj
1992 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Superplastinen muovaus - levynmuovauksen erikoismenetelmä
Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier BV)Comparison of the Corrosion Resistance of TiN and (Ti, Al)N coatings
Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Uusia materiaaliratkaisuja auton teräksisten levypyörien valmistukseen
Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier Science)Pidätyspaineen säätäminen syvävedossa
Korhonen, A.
1992 in Ohutlevyuutiset (Elsevier Science)Comparison of the corrosion resistance of TiN and (Ti,Al)N coatings
Penttinen, I.; Korhonen, A.S.; Harju, E.; Turkia, M.A.; Forsen, O.; Ristolainen, E.O.
1992 in SURFACE AND COATINGS TECHNOLOGY (Elsevier Science)Application of forming simulation in the post-buckling analysis of cold-formed stainless steel columns
Manninen, Timo; Korhonen, A.S.; Larkiola, J.
2003 Modelling of deep drawing of stainless steel
Manninen, T.; Larkiola, J.; Korhonen, Antti
2002 Three-dimensional numerical modeling of continuous extrusion
Manninen, T.; Ramsay, P.; Korhonen, Antti
2002 Modeling and optimization of metal forming processes
Manninen, T.; Larkiola, J.; Czer, L.; Revuelta, A.; Korhonen, Antti
2002 Editors Preface
Seeger, A.; Korhonen, Antti
2002 Data Mining in Metalforming.New Possibility in Tool Life Analysis?
Cser, L.; Korhonen, Antti
2001 Modelling and optimisation of thermomechanical processing of metals
Myllykoski, P.; Larkiola, J.; Ahokainen, T.; Korhonen, A.; Cser, L.
1999 Conference proceedingsForming and fracture limits of an aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki; Koivunen, Petri2010 ISBN: 0-9659463-2-0Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari2010 ISBN: 978-3-85125-108-1Comparsion of Forming and Fracture Limits of an Aluminum Alloy and Austenitic Stainless Steel
Korhonen, A; Manninen, T.; Yoon, J.-W.; Larkiola, J.2009 On the forming and fracture limits of sheet metals
Korhonen, A.; Manninen, T.; Yoon, J.-W.2009 Comparison of forming and fracture limits of an aluminum alloy and austenitic stainless steel
Korhonen, A.; Manninen, T.; Yoon, J.-W.; Larkiola, J.2009 Large-Strain Bauschinger Effect in Austenitic Stainless Steel Sheet,
Manninen, T.; Myllykoski, P.; Taulavuori, T.; Korhonen, A2009 Severe Plastic Deformation (SPD) Processes for Metals
Azushima, Akira; Kopp, Reiner; Korhonen, Antti; Yang, D.Y.; Micari, Fabrizio; Lahoti, G.D.; Groche, Peter; Yanagimoto, Jun; Tsuji, N.; Rosochowski, Andrzej; Yanagida, Akira2008 Forming and fracture criteria for austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo2008 Comparison of two commercial FE codes for sheet metal forming
Revuelta, A.; Kanervo, K.; Myllykoski, P.; Larkiola, J.; Korhonen, A.S.2007 ISBN: 978-0-7354-0415-1ISSN: 0094-243XHardening models for austenitic stainless steels
Kanervo, K.; Manninen, T.; Korhonen, A.S.2006 On formability and forming limits of austenitic stainless steels
Kanervo, K.; Manninen, T.; Larkiola, J.; Korhonen, A.S.2006 ISBN: 83-89541-66-1Plastic deformation of solderless press-fit connectors
Manninen, Timo; Kanervo, Kalle; Revuelta, A.; Larkiola, J.; Korhonen, Antti2005 ISBN: 88-87331-74-XFlash formation in continuous extrusion
Manninen, Timo; Ramsay, P.; Korhonen, Antti2005 ISBN: 973-27-1175-2Deep drawing of double bowl kitchen sinks of stainless steel
Häkkinen, E.; Korhonen, A.; Manninen, T.; Toivanen, T.; Tarkiainen, R.2000 Process State Monitoring Based on Data Mining in Hot Rolling
Cser, L.; Korhonen, A.S.; Simula, O.; Ruha, P.1999 Data mining in improving the geometric quality parameters of hot rolled strips
Cser, L.; Korhonen, A.S.; Mäntylä, P.; Simula, O.1999 Uj modszerek a meleghengerlesi folyamatok elemzeseben es a folyamatkövetesben
Cser, L.; Korhonen, A.S.; Gulyas, J.; Reiss, G.; Myllykoski, P.; Larkiola, J.1999 Data Mining and State Monitoring in Hot Rolling
Cser, L.; Korhonen, A.S.; Gulyas, J.; Mäntylä, P.; Simula, O.; Reiss, G.; Ruha, P.1999 Notes on the history of iron and steel making and processing
Korhonen, A.1999 Metals replacing ceramics in catalytic converters
Korhonen, A.1999 Predicting and modelling flatness with neural networks
Larkiola, J.; Korhonen, A.; Cser, L.1999 A Three Dimensional Finite Element Analysis of Hot Forging a Part for the Automotive Industry
Andersson, K.; Katajarinne, T.; Kivivuori, S.; Korhonen, A.S.1998 Application of Neural Networks for Modelling of Rolling and Annealing of Steel Strip
Cser, L.; Korhonen, A.S.; Larkiola, J.; Myllykoski, P.; Simula, O.1998 Application of neural networks in rolling of steel
Korhonen, A.; Larkiola, J.1998 Application of neural networks in analysis of formability and flatness of steel strips
Myllykoski, P.; Larkiola, J.; Korhonen, A.S.1998 Finnish experiences on university - industry collaboration in materials science and physical metallurgy
Korhonen, A.S.; Sulonen, M.S.1997 Effect of work material composition on the cutting performance of PVD TiN-coated tools
Korhonen, A.1997 Determining tandem cold rolling efficiency using physical models and neural computing
Larkiola, J.; Nylander, J.; Myllykoski, P.; Korhonen, A.S.1996 Investigations of surface morphology, friction, elasticity and adhesion by SFM: Examples from metallurgy, polymers and biology
Leijala, A.; Penttinen, I.; Korhonen, A.S.1996 Applications of scanning force microscopy
Leijala, A.; Penttinen, I.; Korhonen, A.S.; Utriainen, M.1996 Prediction of the friction coefficient in cold rolling by neural computing
Myllykoski, P.; Nylander, J.; Korhonen, A.S.1995 Finite-Element Modelling of Metal Forming Processes
Andersson, K.; Korhonen, A.S.1994 Calculation of the Hardness Distribution in Cooled Steel Products
Kivivuori, S.; Korhonen, A.S.1994 Hydromekanisk formgivning
Eriksson, Leif; Korhonen, Antti1993 Profilvalsning-kontrol av processparametrar genom töjningnivåberäkningar
Larkiola, Jari; Eriksson, Leif; Häkkinen, Erkki; Korhonen, Antti1993 Experiments on the Modelling of Profile in the Cold Rolling of Strips
Larkiola, Jari; Nylander, J.; Korhonen, A.S.1993 Recycled cold-forged steels
Penttinen, Ilkka; Kivivuori, S.; Korhonen, A.S.1993 The Effects of different Interlayers on the Corrosion and high temperature oxidation behavior of TiN Coated Steel Samples
Pischow, K.A.; Korhonen, A.S.Ristolainen; Rossi, F.; Datta, P.K.1993 STM and SIMS Analysis of the Interfaces and Intermediate Layers of TiN/Ti/Substrate Systems
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1993 Elevated Temperature Wear Surface of Some Mould Materials Studied by STM and SIMS
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1993 SFM and SIMS study of tribofilms growing on TiN coatings during an elevated temperature wear test
Pischow, Kaj; Korhonen, A.S.; Ristolainen, E.O.1993 Depth Profiling with STM
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1993 STM and SIMS Study of Tribofilms Growing on TiN Coatingh during and elevated Temperature
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1993 Study of Tribofilms Growing on TiN Coatingh during an Elevated Temperature Wear Test
Pischow, K.A.; Korhonen, A.S.; Ristolainen, Eero O.1993 A Study of Scale-Effects During Accelerated Cooling
Ranta, Heikki; Larkiola, J.; Korhonen, A.S.; Nikula, A.1993 Prediction of the hardness of a hot-forged steel product
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Computer Aided Forging Die Design Based on the Simulation of Metal Flow
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Numerical prediction of the mechanical properties of a microalloyed steel and low-carbon forging steel after controlled cooling
Kivivuori, S.; Andersson, Klas; Korhonen, A.S.; Ollilainen, V.1992 Simulation of cold roll forming
Larkiola, Jari; Eriksson, L.; Korhonen, A.S.1992 The Effects of Prolonged Scanning on the Oxidized Stainless Steel Substrate during Scanning Tunneling Microscopy
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.1992 The Influence of Sputtering Time and Tatanium Interlayers on the Adhesion of PVD TiN Coating on Stainless Steel Substrate
Pischow, K.A.; Ristolainen, E.O.; Eriksson, I.; Harju, E.; Korhonen, A.S.1992 Simulation of copper extrusion by using Finite-element method
Reinikainen, Tommi; Kivivuori, S.; Korhonen, A.S.1992 Comparison of two commercial FEM codes in metal forming simulations
Reinikainen, Tommi; Andersson, Klas; Kivivuori, S.; Korhonen, A.S.1992 Non-refereed scientific articles
Unrefereed conference proceedingsForming and fracture limits of aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki2011 Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari2011 Publications intended for professional communities
Article in professional journalForming and fracture limits of austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen (ELSEVIER SCIENCE SA LAUSANNE)Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in Plasticity (ELSEVIER SCIENCE SA LAUSANNE)Large-Strain Baushinger Effect In AISI 301 Type Austenitic Stainless Steel Sheet
Manninen, Timo; Taulavuori, Tero; Myllykoski, Pirkka; Korhonen, Antti2008 in The 9th International Conference on Technology of Plasticity (ICTP 2008) (ELSEVIER SCIENCE SA LAUSANNE)Saksassa tutkitaan uusia levynmuovausmenetelmiä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Levynmuovaajat koolla Colmarissa Ranskassa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Räätälöityjä levyaihioita teräksestä ja alumiinista
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Ruostumaton teräsohutlevy korvaa keraameja auton katalysaattorissa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Kevyitä rakenteita jäykistä monikerroslevyistä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Published development or research reportOhutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia
Korhonen, Antti; Larkiola, Jari2012 Biennial report 1993-94
Korhonen, Antti1995 Biennial report 1991-92
Korhonen, A.1993 Terästen kontrolloitu valssaus ja nopeutettu jäähdytys KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti1993 Controlled rolling and accelerated cooling of steel, KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti; Partinen, Seija1993 Tillämpning av FEM vid varmvalsning
Haraldsen, Ane Kristin; Ranta, N.N.; Malinen, N.N.; Korhonen, A.S.1992 The Use of STM and SIMS in the Study of the Interlayers and the Interfaces in TiN Hard Coatings
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1992 The Reactions of the Interlayer between PVD TiN Coating and Oxidized Stainless Steel Substrate
Pischow, K.A.; Korhonen, A.S.; Barna, P.A.; Ristolainen, E.O.1992
Forming and fracture limits of an aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki; Koivunen, Petri
2010 ISBN: 0-9659463-2-0
Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2010 ISBN: 978-3-85125-108-1
Comparsion of Forming and Fracture Limits of an Aluminum Alloy and Austenitic Stainless Steel
Korhonen, A; Manninen, T.; Yoon, J.-W.; Larkiola, J.
2009 On the forming and fracture limits of sheet metals
Korhonen, A.; Manninen, T.; Yoon, J.-W.
2009 Comparison of forming and fracture limits of an aluminum alloy and austenitic stainless steel
Korhonen, A.; Manninen, T.; Yoon, J.-W.; Larkiola, J.
2009 Large-Strain Bauschinger Effect in Austenitic Stainless Steel Sheet,
Manninen, T.; Myllykoski, P.; Taulavuori, T.; Korhonen, A
2009 Severe Plastic Deformation (SPD) Processes for Metals
Azushima, Akira; Kopp, Reiner; Korhonen, Antti; Yang, D.Y.; Micari, Fabrizio; Lahoti, G.D.; Groche, Peter; Yanagimoto, Jun; Tsuji, N.; Rosochowski, Andrzej; Yanagida, Akira
2008 Forming and fracture criteria for austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo
2008 Comparison of two commercial FE codes for sheet metal forming
Revuelta, A.; Kanervo, K.; Myllykoski, P.; Larkiola, J.; Korhonen, A.S.
2007 ISBN: 978-0-7354-0415-1
ISSN: 0094-243X
Hardening models for austenitic stainless steels
Kanervo, K.; Manninen, T.; Korhonen, A.S.
2006 On formability and forming limits of austenitic stainless steels
Kanervo, K.; Manninen, T.; Larkiola, J.; Korhonen, A.S.
2006 ISBN: 83-89541-66-1
Plastic deformation of solderless press-fit connectors
Manninen, Timo; Kanervo, Kalle; Revuelta, A.; Larkiola, J.; Korhonen, Antti
2005 ISBN: 88-87331-74-X
Flash formation in continuous extrusion
Manninen, Timo; Ramsay, P.; Korhonen, Antti
2005 ISBN: 973-27-1175-2
Deep drawing of double bowl kitchen sinks of stainless steel
Häkkinen, E.; Korhonen, A.; Manninen, T.; Toivanen, T.; Tarkiainen, R.
2000 Process State Monitoring Based on Data Mining in Hot Rolling
Cser, L.; Korhonen, A.S.; Simula, O.; Ruha, P.
1999 Data mining in improving the geometric quality parameters of hot rolled strips
Cser, L.; Korhonen, A.S.; Mäntylä, P.; Simula, O.
1999 Uj modszerek a meleghengerlesi folyamatok elemzeseben es a folyamatkövetesben
Cser, L.; Korhonen, A.S.; Gulyas, J.; Reiss, G.; Myllykoski, P.; Larkiola, J.
1999 Data Mining and State Monitoring in Hot Rolling
Cser, L.; Korhonen, A.S.; Gulyas, J.; Mäntylä, P.; Simula, O.; Reiss, G.; Ruha, P.
1999 Notes on the history of iron and steel making and processing
Korhonen, A.
1999 Metals replacing ceramics in catalytic converters
Korhonen, A.
1999 Predicting and modelling flatness with neural networks
Larkiola, J.; Korhonen, A.; Cser, L.
1999 A Three Dimensional Finite Element Analysis of Hot Forging a Part for the Automotive Industry
Andersson, K.; Katajarinne, T.; Kivivuori, S.; Korhonen, A.S.
1998 Application of Neural Networks for Modelling of Rolling and Annealing of Steel Strip
Cser, L.; Korhonen, A.S.; Larkiola, J.; Myllykoski, P.; Simula, O.
1998 Application of neural networks in rolling of steel
Korhonen, A.; Larkiola, J.
1998 Application of neural networks in analysis of formability and flatness of steel strips
Myllykoski, P.; Larkiola, J.; Korhonen, A.S.
1998 Finnish experiences on university - industry collaboration in materials science and physical metallurgy
Korhonen, A.S.; Sulonen, M.S.
1997 Effect of work material composition on the cutting performance of PVD TiN-coated tools
Korhonen, A.
1997 Determining tandem cold rolling efficiency using physical models and neural computing
Larkiola, J.; Nylander, J.; Myllykoski, P.; Korhonen, A.S.
1996 Investigations of surface morphology, friction, elasticity and adhesion by SFM: Examples from metallurgy, polymers and biology
Leijala, A.; Penttinen, I.; Korhonen, A.S.
1996 Applications of scanning force microscopy
Leijala, A.; Penttinen, I.; Korhonen, A.S.; Utriainen, M.
1996 Prediction of the friction coefficient in cold rolling by neural computing
Myllykoski, P.; Nylander, J.; Korhonen, A.S.
1995 Finite-Element Modelling of Metal Forming Processes
Andersson, K.; Korhonen, A.S.
1994 Calculation of the Hardness Distribution in Cooled Steel Products
Kivivuori, S.; Korhonen, A.S.
1994 Hydromekanisk formgivning
Eriksson, Leif; Korhonen, Antti
1993 Profilvalsning-kontrol av processparametrar genom töjningnivåberäkningar
Larkiola, Jari; Eriksson, Leif; Häkkinen, Erkki; Korhonen, Antti
1993 Experiments on the Modelling of Profile in the Cold Rolling of Strips
Larkiola, Jari; Nylander, J.; Korhonen, A.S.
1993 Recycled cold-forged steels
Penttinen, Ilkka; Kivivuori, S.; Korhonen, A.S.
1993 The Effects of different Interlayers on the Corrosion and high temperature oxidation behavior of TiN Coated Steel Samples
Pischow, K.A.; Korhonen, A.S.Ristolainen; Rossi, F.; Datta, P.K.
1993 STM and SIMS Analysis of the Interfaces and Intermediate Layers of TiN/Ti/Substrate Systems
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1993 Elevated Temperature Wear Surface of Some Mould Materials Studied by STM and SIMS
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1993 SFM and SIMS study of tribofilms growing on TiN coatings during an elevated temperature wear test
Pischow, Kaj; Korhonen, A.S.; Ristolainen, E.O.
1993 Depth Profiling with STM
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1993 STM and SIMS Study of Tribofilms Growing on TiN Coatingh during and elevated Temperature
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1993 Study of Tribofilms Growing on TiN Coatingh during an Elevated Temperature Wear Test
Pischow, K.A.; Korhonen, A.S.; Ristolainen, Eero O.
1993 A Study of Scale-Effects During Accelerated Cooling
Ranta, Heikki; Larkiola, J.; Korhonen, A.S.; Nikula, A.
1993 Prediction of the hardness of a hot-forged steel product
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992 Computer Aided Forging Die Design Based on the Simulation of Metal Flow
Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992 Numerical prediction of the mechanical properties of a microalloyed steel and low-carbon forging steel after controlled cooling
Kivivuori, S.; Andersson, Klas; Korhonen, A.S.; Ollilainen, V.
1992 Simulation of cold roll forming
Larkiola, Jari; Eriksson, L.; Korhonen, A.S.
1992 The Effects of Prolonged Scanning on the Oxidized Stainless Steel Substrate during Scanning Tunneling Microscopy
Pischow, K.A.; Korhonen, A.S.; Ristolainen, E.O.
1992 The Influence of Sputtering Time and Tatanium Interlayers on the Adhesion of PVD TiN Coating on Stainless Steel Substrate
Pischow, K.A.; Ristolainen, E.O.; Eriksson, I.; Harju, E.; Korhonen, A.S.
1992 Simulation of copper extrusion by using Finite-element method
Reinikainen, Tommi; Kivivuori, S.; Korhonen, A.S.
1992 Comparison of two commercial FEM codes in metal forming simulations
Reinikainen, Tommi; Andersson, Klas; Kivivuori, S.; Korhonen, A.S.
1992 Forming and fracture limits of aluminum alloy
Korhonen, Antti; Heikinheimo, Erkki
2011 Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels
Korhonen, Antti; Manninen, Timo; Larkiola, Jari
2011 Publications intended for professional communities
Article in professional journalForming and fracture limits of austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen (ELSEVIER SCIENCE SA LAUSANNE)Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo2008 in Plasticity (ELSEVIER SCIENCE SA LAUSANNE)Large-Strain Baushinger Effect In AISI 301 Type Austenitic Stainless Steel Sheet
Manninen, Timo; Taulavuori, Tero; Myllykoski, Pirkka; Korhonen, Antti2008 in The 9th International Conference on Technology of Plasticity (ICTP 2008) (ELSEVIER SCIENCE SA LAUSANNE)Saksassa tutkitaan uusia levynmuovausmenetelmiä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Levynmuovaajat koolla Colmarissa Ranskassa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Räätälöityjä levyaihioita teräksestä ja alumiinista
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Ruostumaton teräsohutlevy korvaa keraameja auton katalysaattorissa
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Kevyitä rakenteita jäykistä monikerroslevyistä
Korhonen, A.1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Published development or research reportOhutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia
Korhonen, Antti; Larkiola, Jari2012 Biennial report 1993-94
Korhonen, Antti1995 Biennial report 1991-92
Korhonen, A.1993 Terästen kontrolloitu valssaus ja nopeutettu jäähdytys KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti1993 Controlled rolling and accelerated cooling of steel, KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti; Partinen, Seija1993 Tillämpning av FEM vid varmvalsning
Haraldsen, Ane Kristin; Ranta, N.N.; Malinen, N.N.; Korhonen, A.S.1992 The Use of STM and SIMS in the Study of the Interlayers and the Interfaces in TiN Hard Coatings
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.1992 The Reactions of the Interlayer between PVD TiN Coating and Oxidized Stainless Steel Substrate
Pischow, K.A.; Korhonen, A.S.; Barna, P.A.; Ristolainen, E.O.1992
Forming and fracture limits of austenitic stainless steel sheets
Korhonen, Antti; Manninen, Timo
2008 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093
Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo
2008 in MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen (ELSEVIER SCIENCE SA LAUSANNE)Forming and fracture limits of austenitic stainless steel sheet
Korhonen, Antti; Manninen, Timo
2008 in Plasticity (ELSEVIER SCIENCE SA LAUSANNE)Large-Strain Baushinger Effect In AISI 301 Type Austenitic Stainless Steel Sheet
Manninen, Timo; Taulavuori, Tero; Myllykoski, Pirkka; Korhonen, Antti
2008 in The 9th International Conference on Technology of Plasticity (ICTP 2008) (ELSEVIER SCIENCE SA LAUSANNE)Saksassa tutkitaan uusia levynmuovausmenetelmiä
Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Levynmuovaajat koolla Colmarissa Ranskassa
Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Räätälöityjä levyaihioita teräksestä ja alumiinista
Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Ruostumaton teräsohutlevy korvaa keraameja auton katalysaattorissa
Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Kevyitä rakenteita jäykistä monikerroslevyistä
Korhonen, A.
1995 in Ohutlevyuutiset (ELSEVIER SCIENCE SA LAUSANNE)Ohutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia
Korhonen, Antti; Larkiola, Jari
2012 Biennial report 1993-94
Korhonen, Antti
1995 Biennial report 1991-92
Korhonen, A.
1993 Terästen kontrolloitu valssaus ja nopeutettu jäähdytys KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti
1993 Controlled rolling and accelerated cooling of steel, KTM Dn:o 261/881/88
Ranta, Heikki; Korhonen, Antti; Partinen, Seija
1993 Tillämpning av FEM vid varmvalsning
Haraldsen, Ane Kristin; Ranta, N.N.; Malinen, N.N.; Korhonen, A.S.
1992 The Use of STM and SIMS in the Study of the Interlayers and the Interfaces in TiN Hard Coatings
Pischow, K.A.; Ristolainen, E.O.; Korhonen, A.S.
1992 The Reactions of the Interlayer between PVD TiN Coating and Oxidized Stainless Steel Substrate
Pischow, K.A.; Korhonen, A.S.; Barna, P.A.; Ristolainen, E.O.
1992 Read about executive education
Other experts
Glen Cooper
Biography Glen studied as a post graduate student in MACE on the Mechanical Engineering Design MSc and then stayed on to complete a PhD in the Design Reliable Systems funded jointly by EPSRC & Volvo Cars. Glen left MACE to join the University of Sheffield as a Research Assistant to test and m...
Gregory Vanel
Areas of expertise Economy of Globalization International Political Economy Accounting norms and conceptual framework International relationships Money-Finance Biography Grégory Vanel, French Dissertation in international economics and Canadian Ph.D in political science. Grégory Vanel taught se...
Popular Courses
Leading People and Teams
ESMT
Berlin, Germany
Nov 19
Private Equity: Investing and Creating Value
The Wharton School
Philadelphia, Pennsylvania, United States
Feb 2, 2025
The Positive Leader: Deep Change and Organizational Transformation
Stephen M. Ross School of Business
Ann Arbor, Michigan, United States
Dec 1
Looking for an expert?
Contact us and we'll find the best option for you.