Heikki Remes
Assistant Professor at Aalto University School of Business
Schools
- Aalto University School of Business
Links
Biography
Aalto University School of Business
Peer-reviewed scientific articles
Journal article-refereed, Original researchStrain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
Malitckii, E.; Remes, H.; Lehto, P.; Yagodzinskyy, Y.; Bossuyt, S.; Hänninen, H.2018 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454A benchmark study of uncertainness in welding simulation
Caprace, Jean David; Fu, Guangming; Carrara, Joice F.; Remes, Heikki; Shin, Sang Beom2017 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339Influence of crack tip plasticity on the slope of fatigue curves for laser stake-welded T-joints loaded under tension and bending
Gallo, Pasquale; Remes, Heikki; Romanoff, Jani2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Fatigue strength of laser-welded foam-filled steel sandwich beams
Karttunen, Anssi; Kanerva, Mikko; Frank, Darko; Romanoff, Jani; Remes, Heikki; Jelovica, Jasmin; Bossuyt, Sven; Sarlin, Essi2017 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275Free flexural vibration of symmetric beams with inertia induced cross section deformations
Laakso, A.; Romanoff, J.; Remes, H.2017 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231Statistical size effect on multiaxial fatigue strength of notched steel components
Leitner, Martin; Vormwald, Michael; Remes, Heikki2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200
Leitner, Martin; Garb, Christian; Remes, Heikki; Stoschka, Michael2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Fatigue strength of thin laser-hybrid welded full-scale deck structure
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki; Itävuo, Antti; Niemelä, Ari2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Hydrogen effects on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, E.; Yagodzinskyy, Y.; Lehto, P.; Remes, H.; Romu, J.; Hänninen, H.2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Allowable stresses in high-frequency mechanical impact (HFMI)-treated joints subjected to variable amplitude loading
Mikkola, Eeva; Remes, Heikki2017 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288A finite element study on residual stress stability and fatigue damage in high-frequency mechanical impact (HFMI)-treated welded joint
Mikkola, Eeva; Remes, Heikki; Marquis, Gary2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Factors affecting the fatigue strength of thin-plates in large structures
Remes, Heikki; Romanoff, Jani; Lillemäe, Ingrit; Frank, Darko; Liinalampi, Sami; Lehto, Pauli; Varsta, Petri2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123The effect of the extension of the instrumentation on the measured ice-induced load on a ship hull
Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki2017 in OCEAN ENGINEERING (Elsevier BV)ISSN: 0029-8018Influence of load length on short-term ice load statistics in full-scale
Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki2017 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339Interaction effect of adjacent small defects on the fatigue limit of a medium carbon steel
Åman, M.; Okazaki, S.; Matsunaga, H.; Marquis, G. B.; Remes, H.2017 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XFatigue strength assessment of laser stake-welded T-joints subjected to reversed bending
Frank, D.; Dissel, P.; Remes, H.; Romanoff, J.; Klostermann, O.2016 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XNon-linear effective properties for web-core steel sandwich panels in tension
Körgesaar, Mihkel; Reinaldo, Goncalves; Romanoff, Jani; Remes, Heikki2016 in INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (Elsevier Limited)ISSN: 0020-7403Characterisation of local grain size variation of welded structural steel
Lehto, Pauli; Romanoff, Jani; Remes, Heikki; Sarikka, Teemu2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288Fatigue strength analysis of laser-hybrid welds in thin plate considering weld geometry in microscale
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Romanoff, Jani; Porter, David2016 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, I.; Remes, H.; Liinalampi, S.; Itävuo, Antti2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288Material characterization of high-frequency mechanical impact (HFMI)-treated high-strength steel
Mikkola, Eeva; Marquis, Gary; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2016 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275Influence of nonsymmetric steel sandwich panel joints on response and fatigue strength of passenger ship deck structures
Romanoff, Jani; Ehlers, Sören; Remes, Heikki2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866Block erection in the event of delays in shipbuilding A scenario-based approach
Tokola, Henri Alfred; Niemi, Esko; Remes, Heikki2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866Fatigue strength of laser-welded thin-plate ship structures based on nominal and structural hot-spot stress approach
Fricke, W.; Remes, H; Feltz, O.; Lillemäe, I.; Tchuindjang, D.; Reinert, T.; Nevierov, A.; Sichermann, W.; Brinkmann, M.; Kontkanen, T.; Bohlmann, B.; Molter, L.2015 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302Equivalent mechanical properties for cylindrical cell honeycomb core structure
Cernescu, Anghel; Romanoff, Jani; Remes, Heikki; Faur, Nicolae; Jelovica, Jasmin2014 in COMPOSITE STRUCTURES (Elsevier BV)ISSN: 0263-8223Influence of general corrosion on buckling strength of laser-welded web-core sandwich plates
Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki2014 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)ISSN: 0143-974XSize dependent response of large shell elements under in-plane tensile loading
Körgesaar, Mihkel; Remes, Heikki; Romanoff, Jani2014 in INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0020-7683Influence of grain size distribution on the Hall-Petch relationship of welded structural steel
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093Influence of initial distortion of 3 mm thin superstructure decks on hull girder response for fatigue assessment
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2014 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339Influencing factors on fatigue strength of welded thin plates based on structural stress assessment
Remes, Heikki; Fricke, W.2014 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288J-integral-based approach to fatigue assessment of laser stake-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Fatigue strength assessment of laser stake-welded web-core steel sandwich panels
Frank, Darko; Romanoff, Jani; Remes, Heikki2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XOn the slope of the fatigue resistance curve for laser stake-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758XRound robin study on local stress and fatigue assessment of lap joints and doubler plates
Fricke, Wolfgang; Codda, Matteo; Feltz, Olav; Garbatov, Yordan; Remes, Heikki; Risso, Giovanni; Rizzo, Cesare; Romanoff, Jani2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302Influence of initial distortion on the structural stress in 3 mm thick stiffened panels
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2013 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231Strain-based approach to fatigue crack initiation and propagation in welded steel joints with arbitrary notch shape
Remes, Heikki2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Influence of surface integrity on the fatigue strength of high-strength steels
Remes, Heikki; Korhonen, Eero; Lehto, Pauli; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo2013 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)ISSN: 0143-974XHull-superstructure interaction in optimised passenger ships
Romanoff, Jani; Remes, Heikki; Varsta, Petri; Jelovica, Jasmin; Klanac, Alan; Niemelä, Ari; Bralic, Svemir; Naar, Hendrik2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302Block erection sequencing in shipbuilding with general lifting and joining times
Tokola, Henri; Niemi, Esko; Remes, Heikki2013 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866Fatigue strength of welded butt joints in thin and slender specimens
Lillemäe, Ingrit; Lammi, Heikki; Molter, Lars; Remes, Heikki2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Continuum approach to fatigue crack initiation and propagation in welded steel joints
Remes, Heikki; Varsta, Petri; Romanoff, Jani2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123Fatigue Assessment of Laser Stake-Welded T-Joints
Frank, Darko; Remes, Heikki; Romanoff, Jani2011 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123A multi-objective optimisation-based structural design procedure for the concept stage - a chemical product tanker case study
Ehlers, Sören; Remes, H.; Klanac, A.; Naar, H.2010 in SHIP TECHNOLOGY RESEARCH (Schiffahrts Verlag Hansa)ISSN: 0937-7255Statistics of Weld Geometry for Laser-Hybrid welded Joints and Its Application within Notch Stress Approach
Remes, Heikki; Varsta, Petri2010 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288Round robin study on structural hot-spot and effective notch stress analysis
Fricke, Wolfgang; Bollero, Anfrea; Chirica, Ionel; Garbatov, Yordan; Jancart, Gabrice; Kahl, Adrian; Remes, Heikki; Rizzo, Cesare M.; von Selle, Hubertus; Urban, Axel; Wei, Liwu2008 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302Differences in Fatigue Strength between Arc and Laser Hybrid Welded Joints
Remes, Heikki; Varsta, Petri2008 in JOURNAL OF SHIP PRODUCTION (Society of Naval Architects and Marine Engineers)ISSN: 8756-1417The stiffness of laser stake welded T-joints in web-core sandwich structures
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko; Varsta, Petri2007 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231Laser-Welded Web-Core Sandwich Plates under Patch-Loading
Romanoff, Jani; Varsta, Petri; Remes, Heikki2007 in MARINE STRUCTURES (Elsevier BV)Book section, Chapters in research booksCommittee V.3: Materials and fabrication technology
Caprace, J.-D.; Mishra, B.; Pires, F.; Roland, F.; Schipperen, I.; Andric, J.; Li, L.; Osawa, N.; Lindstrom, P.; Doig, R.; Remes, Heikki; Kim, M.H.2015 ISBN: 9781138028951Fatigue and Fracture (Committee III.2)
Biot, Marco; Bohlmann, Berend; Remes, Heikki; Ringsberg, Jonas; Horn, Agnes M.; Andersen, Michael; Cammen, Jeron van der; Aihara, Shuji; Choi, Byung Ki; Garbatov, Yordan; Mishra, Brajendra; Qian, Xudong; Samanta, Asokendu; Wang, Deyu; Zhang, Shengming2012 ISBN: 978-3-87700-131Fatigue and fracture (Committee III.2.)
Horn, A.M.; Andersen, M.R.; Biot, M.; Bohlmann, B.; Mahérault-Mougin, S.; Kozak, J.; Osawa, N.; Jang, Y.S.; Remes, H.; Ringsberg, J.; Cammen, J.van der2009 Conference proceedingsHydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2017 ISBN: 9780791861387Towards efficient crash analysis of large ship structures Equivalent single layer approach for stiffened orthotropic panels under tensile loading
Körgesaar, Mihkel; Reinaldo, Goncalves; Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki2016 ISBN: 978-87-7475-473-2Influence of welding distortion on the structural stress in thin deck panels
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Avi, Eero; Romanoff, Jani2016 ISBN: 978-87-7475-473-2Fatigue strength modelling of high-performance welds using local approaches
Remes, Heikki; Jelovica, Jasmin; Romanoff, Jani; Lehto, Pauli; Liinalampi, Sami2016 ISBN: 978-87-7475-473-2Use of a Equivalent Single Layer Plate Theory in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Avi, Eero; Reinaldo, Goncalves; Körgesaar, Mihkel; Raikunen, Joni; Remes, Heikki; Niemelä, Ari; Reddy, Junthula; Varsta, Petri2016 ISBN: 978-87-7475-473-2Hull and superstructure interaction using coupled beam method
Toming, Risto; Kerge, Els-Hedvig; Naar, Hendrik; Tabri, Kristjan; Romanoff, Jani; Remes, Heikki2016 ISBN: 978-87-7475-473-2The effect of interacting small defects on the fatigue limit of a medium carbon steel
Åman, Mari; Okazaki, Saburo; Matsunaga, Hisao; Marquis, Gary B.; Remes, Heikki2016 in Procedia Structural Integrity (Elsevier Science B.V.)ISSN: 2452-3216Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials
Frank, Darko; Romanoff, Jani; Remes, Heikki2015 ISBN: 978-1-138-02789-3Influence of Block Building Method on Outfitting Efficiency at an Assembly Shipyard
Kujala, L.M.; Nallikari, M.; Tokola, H.A.; Remes, H.2015 ISBN: 978-1-909024-43-4Fatigue strength of welded extra high-strength and thin steel plates
Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.2015 ISBN: 978-1-138-02789-3The determination of ice-induced loads on ship hull from shear strain measurements
Suominen, Mikko; Romanoff, Jani; Remes, Heikki; Kujala, Pentti2015 ISBN: 978-1-138-02789-3Fatigue crack growth rate in laser-welded web core sandwich panels - fatigue crack propagation in welded base metal
Cernescu, Anghel; Romanoff, Jani; Lehto, Pauli; Remes, Heikki2014 Fatigue assessment of large thin-walled structures with initial distortions
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2014 Microstructure and strain -based fatigue life approach for high-performance welds
Remes, Heikki; Lehto, Pauli; Romanoff, Jani2014 The effect of the secondary bending moment on the fracture strength evaluation of the laser welded joints from a web core sandwich structure
Cernescu, Anghel; Romanoff, Jani; Remes, Heikki2013 in Key Engineering Materials (TRANS TECH PUBLICATIONS)ISSN: 1013-9826Fatigue strength of laser-welded thin plate ship structures based on nominal and structural hot-spot stress approach
Fricke, Wolfgang; Remes, Heikki; Feltz, Olav; Lillemäe, Ingrit; Tchuindjang, Didi; Reinert, Thomas; Nevierov, Alessandro; Sichermann, Wolfgang; Brinkmann, Markus; Kontkanen, Tuomo; Bohlmann, Berend; Molter, Lars2013 Influence of Surface Integrity on the Fatigue Strength of High Strength Steel in Balcony Openings of Cruise Ship Structures
Korhonen, Eero; Remes, Heikki; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo.2013 An Analytical Method for Cabin Deck Fundamental Frequency
Laakso, A.; Romanoff, J.; Remes, H.; Niemelä, A.2013 Hull-Superstructure Interaction Induced Secondary Effects in Passenger Ships
Parmasto, Oliver; Romanoff, Jani; Remes, Heikki2013 ISBN: 978-89-950016-1-5Shear Response of Prismatic Ship Hull Girders
Romanoff, J.; Remes, H.; Varsta, P.; Melk, K.; Naar, H.; Niemelä, A.2013 Cruise and Ferry Experience program for Future Passenger Ship Designers
Ahola, Markus; Romanoff, Jani; Kujala, Pentti; Remes, Heikki; Varsta, Petri2011 ISBN: 978-1-905040-93-3Round-Robin on Local Stress Determination and Fatigue Assessment of Load-Carrying Fillet-Welded Joints
Fricke, W.; Codda, M.; Feltz, O.; Garbatov, Y.; Remes, H.; Risso, G.; Rizzo, C.; Romanoff, J.2011 ISBN: 978-0-203-80811-5Hull/Superstructure-Interaction in Optimized Passenger Ships
Remes, Heikki; Romanoff, J.; Varsta, P.; Naar, H.; Niemelä, A.; Jelovica, J.; Klanac, A.; Bralic, S.2011 ISBN: 978-0-203-80811-5The IMPROVEd chemical tanker
Ehlers, Sören; Klanac, A.; Remes, H.; Kapuscik, K.; Naar, H.; Andric, J.; Zanic, V.; Grgic, M.; Pircalabu, E.; Bair, F.2009 ConStruct - Platform for Conceptual Structural Design
Remes, Heikki; Klanac, A.; Varsta, P.; Ehlers, S.2009 Structural Omni-Optimization of a Tanker
Klanac, Alan; Jelovica, Jasmin; Niemeläinen, Matias; Domagallo, Stanislaw; Remes, Heikki; Romanoff, Jani2008 ISBN: 978-2-9600785-0-3Round Robin study on structural hot-spot and effective notch stress analysis
Fricke, W.; Bollero, A.; Chirica, I.; Garbatov, Y.; Jancart, F.; Kahl, A.; Remes, H.; Rizzo, C.M.; von Selle, H.; Urban, A.; Wei, L.2007 ISBN: 978-0-415-43725-7Fatigue Strength between Arc and Laser Hybrid Welded Joints
Remes, Heikki; Varsta, Petri2007 ISBN: 0-943870-04-6Experimental and Theoretical Investigation of Fatigue Characteristics of Laser Hybrid Welded Joints
Remes, Heikki; Kujala, Pentti2004 ISBN: 3-87743-807-5 (Vol. 1), 3-87743-808-3 (Vol. 2)CO2-laser MAG Weldability of Laser Cutting LASER RAEX Steels, Hull Structural Steel Grade A and High Strength Formable Steel OPTIM RAEX 700 MC
Laitinen, Risto; Kujala, Pentti; Remes, Heikki; Nielsen, Steen Erik2003 Fatigue Strength of Laser and Hybrid Weldements in Shipbuilding Industry
Remes, Heikki2003 Fatigue Charasteristics of CO2-laser MAG Welded joints of Laser Cutting RAEX Steels
Remes, Heikki; Kujala, Pentti; Laitinen, Risto2003 Non-refereed scientific articles
Unrefereed conference proceedingsInfluence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 A new cylindrical cell honeycomb core
Cernescu, Anghel; Faur, Nicolae; Romanoff, Jani; Remes, Heikki2013 Influence of initial distortion of thin 3 mm superstructure decks on hull girder response, IIW Document SC-SHIP-47-13
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2013 Influencing factors on fatigue strength of welded thin plates based on structural stress assessment
Remes, H.; Fricke, W.2013 Influence of the initial distortions on the fatigue assessment of thin stiffened deck panels, IIW Document XIII-2448-12
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2012 Fatigue assessment of thick plate laser-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani2011 Statistics of weld geometry for a laser-hybrid welded joints and its application within notch stress approach
Remes, Heikki.; Varsta, Petri2009 Rational model to assess fatigue at the early design stage
Remes, H.; Liigsoo, M.; Amrane, A.; Chirica, I.; Giuglea, V.; Giuglea, S.2009 Fatigue Strength Modelling of Laser Welded Joints
Remes, Heikki2003 Publications intended for professional communities
Article in professional journalAalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (Tampere Technology Centre Ltd)ISSN: 0437-6056Shipbuilding Methods & technologies: Reworking the fatigue model.
Remes, Heikki; Romanoff, Jani2013 in The Naval architect (Royal Institution of Naval Architects)ISSN: 0306-0209Model for metal fatigue
Remes, Heikki2013 in Maritime Risk International (Royal Institution of Naval Architects)ISSN: 1742-9404Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (Royal Institution of Naval Architects)ISSN: 0437-6056Article in professional conference proceedingsFatigue strength of thin laser-hybrid welded panels based on small- and full-scale tests
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki2016 Utilization of Homogenized and Non-Local Beam and Plate Theories in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Reddy, Junthula; Reinaldo, Goncalves; Remes, Heikki2016 Characterisation of local grain size variation of welded structural steel.IIW Doc.No IX-2516-15 (IX-L-1137-15)
Lehto, Pauli; Remes, Heikki; Romanoff, Jani; Sarikka, Teemu2015 Fatigue Strength Analysis of Laser-Hybrid Welds in Thin Plate Considering Actual Weld Geometry
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Heikkilä, Sami; Porter, David2015 Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Itävuo, Antti2015 Influence of residual stresses on elasto-plastic response in HFMI-treated welded joint under different load ratios
Mikkola, Eeva; Remes, Heikki; Marquis, Gary2015 Published development or research reportUltimate strength tests of corroded web-core and corrugated-core sandwich beams
Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki2011 Stiffness and strength testing of laser stake welds in steel sandwich panels
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko2006 Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2
Remes, Heikki2003 Fatigue Strength Modelling of Lase Welded Joints
Remes, Heikki2003 Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER
Remes, Heikki; Socha, Grzegorz2003 Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels
Tamminen, Tero; Remes, Heikki2003 Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels
Tamminen, Tero; Remes, Heikki2003 Hattuprofiililla jäykistetyn levykentän väsymislujuus
Remes, H.1999 Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi
Remes, H.; Kujala, P.1997
Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
Malitckii, E.; Remes, H.; Lehto, P.; Yagodzinskyy, Y.; Bossuyt, S.; Hänninen, H.
2018 in ACTA MATERIALIA (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 1359-6454
A benchmark study of uncertainness in welding simulation
Caprace, Jean David; Fu, Guangming; Carrara, Joice F.; Remes, Heikki; Shin, Sang Beom
2017 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339
Influence of crack tip plasticity on the slope of fatigue curves for laser stake-welded T-joints loaded under tension and bending
Gallo, Pasquale; Remes, Heikki; Romanoff, Jani
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Fatigue strength of laser-welded foam-filled steel sandwich beams
Karttunen, Anssi; Kanerva, Mikko; Frank, Darko; Romanoff, Jani; Remes, Heikki; Jelovica, Jasmin; Bossuyt, Sven; Sarlin, Essi
2017 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275
Free flexural vibration of symmetric beams with inertia induced cross section deformations
Laakso, A.; Romanoff, J.; Remes, H.
2017 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231
Statistical size effect on multiaxial fatigue strength of notched steel components
Leitner, Martin; Vormwald, Michael; Remes, Heikki
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200
Leitner, Martin; Garb, Christian; Remes, Heikki; Stoschka, Michael
2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093
Fatigue strength of thin laser-hybrid welded full-scale deck structure
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki; Itävuo, Antti; Niemelä, Ari
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Hydrogen effects on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, E.; Yagodzinskyy, Y.; Lehto, P.; Remes, H.; Romu, J.; Hänninen, H.
2017 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093
Allowable stresses in high-frequency mechanical impact (HFMI)-treated joints subjected to variable amplitude loading
Mikkola, Eeva; Remes, Heikki
2017 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288
A finite element study on residual stress stability and fatigue damage in high-frequency mechanical impact (HFMI)-treated welded joint
Mikkola, Eeva; Remes, Heikki; Marquis, Gary
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Factors affecting the fatigue strength of thin-plates in large structures
Remes, Heikki; Romanoff, Jani; Lillemäe, Ingrit; Frank, Darko; Liinalampi, Sami; Lehto, Pauli; Varsta, Petri
2017 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
The effect of the extension of the instrumentation on the measured ice-induced load on a ship hull
Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki
2017 in OCEAN ENGINEERING (Elsevier BV)ISSN: 0029-8018
Influence of load length on short-term ice load statistics in full-scale
Suominen, Mikko; Kujala, Pentti; Romanoff, Jani; Remes, Heikki
2017 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339
Interaction effect of adjacent small defects on the fatigue limit of a medium carbon steel
Åman, M.; Okazaki, S.; Matsunaga, H.; Marquis, G. B.; Remes, H.
2017 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758X
Fatigue strength assessment of laser stake-welded T-joints subjected to reversed bending
Frank, D.; Dissel, P.; Remes, H.; Romanoff, J.; Klostermann, O.
2016 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758X
Non-linear effective properties for web-core steel sandwich panels in tension
Körgesaar, Mihkel; Reinaldo, Goncalves; Romanoff, Jani; Remes, Heikki
2016 in INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (Elsevier Limited)ISSN: 0020-7403
Characterisation of local grain size variation of welded structural steel
Lehto, Pauli; Romanoff, Jani; Remes, Heikki; Sarikka, Teemu
2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288
Fatigue strength analysis of laser-hybrid welds in thin plate considering weld geometry in microscale
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Romanoff, Jani; Porter, David
2016 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, I.; Remes, H.; Liinalampi, S.; Itävuo, Antti
2016 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288
Material characterization of high-frequency mechanical impact (HFMI)-treated high-strength steel
Mikkola, Eeva; Marquis, Gary; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu
2016 in MATERIALS AND DESIGN (Elsevier BV)ISSN: 0264-1275
Influence of nonsymmetric steel sandwich panel joints on response and fatigue strength of passenger ship deck structures
Romanoff, Jani; Ehlers, Sören; Remes, Heikki
2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866
Block erection in the event of delays in shipbuilding A scenario-based approach
Tokola, Henri Alfred; Niemi, Esko; Remes, Heikki
2016 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866
Fatigue strength of laser-welded thin-plate ship structures based on nominal and structural hot-spot stress approach
Fricke, W.; Remes, H; Feltz, O.; Lillemäe, I.; Tchuindjang, D.; Reinert, T.; Nevierov, A.; Sichermann, W.; Brinkmann, M.; Kontkanen, T.; Bohlmann, B.; Molter, L.
2015 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302
Equivalent mechanical properties for cylindrical cell honeycomb core structure
Cernescu, Anghel; Romanoff, Jani; Remes, Heikki; Faur, Nicolae; Jelovica, Jasmin
2014 in COMPOSITE STRUCTURES (Elsevier BV)ISSN: 0263-8223
Influence of general corrosion on buckling strength of laser-welded web-core sandwich plates
Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki
2014 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)ISSN: 0143-974X
Size dependent response of large shell elements under in-plane tensile loading
Körgesaar, Mihkel; Remes, Heikki; Romanoff, Jani
2014 in INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0020-7683
Influence of grain size distribution on the Hall-Petch relationship of welded structural steel
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani
2014 in MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (ELSEVIER SCIENCE SA LAUSANNE)ISSN: 0921-5093
Influence of initial distortion of 3 mm thin superstructure decks on hull girder response for fatigue assessment
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2014 in MARINE STRUCTURES (Elsevier BV)ISSN: 0951-8339
Influencing factors on fatigue strength of welded thin plates based on structural stress assessment
Remes, Heikki; Fricke, W.
2014 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288
J-integral-based approach to fatigue assessment of laser stake-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani
2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Fatigue strength assessment of laser stake-welded web-core steel sandwich panels
Frank, Darko; Romanoff, Jani; Remes, Heikki
2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758X
On the slope of the fatigue resistance curve for laser stake-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani
2013 in FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES (FATIGUE & FRACTURE ENGINEERINGMATERIALS STRUCTURES LIMITED)ISSN: 8756-758X
Round robin study on local stress and fatigue assessment of lap joints and doubler plates
Fricke, Wolfgang; Codda, Matteo; Feltz, Olav; Garbatov, Yordan; Remes, Heikki; Risso, Giovanni; Rizzo, Cesare; Romanoff, Jani
2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302
Influence of initial distortion on the structural stress in 3 mm thick stiffened panels
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2013 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231
Strain-based approach to fatigue crack initiation and propagation in welded steel joints with arbitrary notch shape
Remes, Heikki
2013 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Influence of surface integrity on the fatigue strength of high-strength steels
Remes, Heikki; Korhonen, Eero; Lehto, Pauli; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo
2013 in JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (Elsevier BV)ISSN: 0143-974X
Hull-superstructure interaction in optimised passenger ships
Romanoff, Jani; Remes, Heikki; Varsta, Petri; Jelovica, Jasmin; Klanac, Alan; Niemelä, Ari; Bralic, Svemir; Naar, Hendrik
2013 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302
Block erection sequencing in shipbuilding with general lifting and joining times
Tokola, Henri; Niemi, Esko; Remes, Heikki
2013 in Journal of Ship Production and Design (Society of Naval Architects and Marine Engineers)ISSN: 2158-2866
Fatigue strength of welded butt joints in thin and slender specimens
Lillemäe, Ingrit; Lammi, Heikki; Molter, Lars; Remes, Heikki
2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Continuum approach to fatigue crack initiation and propagation in welded steel joints
Remes, Heikki; Varsta, Petri; Romanoff, Jani
2012 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
Fatigue Assessment of Laser Stake-Welded T-Joints
Frank, Darko; Remes, Heikki; Romanoff, Jani
2011 in INTERNATIONAL JOURNAL OF FATIGUE (ELSEVIER SCI LTD)ISSN: 0142-1123
A multi-objective optimisation-based structural design procedure for the concept stage - a chemical product tanker case study
Ehlers, Sören; Remes, H.; Klanac, A.; Naar, H.
2010 in SHIP TECHNOLOGY RESEARCH (Schiffahrts Verlag Hansa)ISSN: 0937-7255
Statistics of Weld Geometry for Laser-Hybrid welded Joints and Its Application within Notch Stress Approach
Remes, Heikki; Varsta, Petri
2010 in WELDING IN THE WORLD (SPRINGER HEIDELBERG)ISSN: 0043-2288
Round robin study on structural hot-spot and effective notch stress analysis
Fricke, Wolfgang; Bollero, Anfrea; Chirica, Ionel; Garbatov, Yordan; Jancart, Gabrice; Kahl, Adrian; Remes, Heikki; Rizzo, Cesare M.; von Selle, Hubertus; Urban, Axel; Wei, Liwu
2008 in SHIPS AND OFFSHORE STRUCTURES (Taylor and Francis Ltd.)ISSN: 1744-5302
Differences in Fatigue Strength between Arc and Laser Hybrid Welded Joints
Remes, Heikki; Varsta, Petri
2008 in JOURNAL OF SHIP PRODUCTION (Society of Naval Architects and Marine Engineers)ISSN: 8756-1417
The stiffness of laser stake welded T-joints in web-core sandwich structures
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko; Varsta, Petri
2007 in THIN-WALLED STRUCTURES (Elsevier Limited)ISSN: 0263-8231
Laser-Welded Web-Core Sandwich Plates under Patch-Loading
Romanoff, Jani; Varsta, Petri; Remes, Heikki
2007 in MARINE STRUCTURES (Elsevier BV)Committee V.3: Materials and fabrication technology
Caprace, J.-D.; Mishra, B.; Pires, F.; Roland, F.; Schipperen, I.; Andric, J.; Li, L.; Osawa, N.; Lindstrom, P.; Doig, R.; Remes, Heikki; Kim, M.H.
2015 ISBN: 9781138028951
Fatigue and Fracture (Committee III.2)
Biot, Marco; Bohlmann, Berend; Remes, Heikki; Ringsberg, Jonas; Horn, Agnes M.; Andersen, Michael; Cammen, Jeron van der; Aihara, Shuji; Choi, Byung Ki; Garbatov, Yordan; Mishra, Brajendra; Qian, Xudong; Samanta, Asokendu; Wang, Deyu; Zhang, Shengming
2012 ISBN: 978-3-87700-131
Fatigue and fracture (Committee III.2.)
Horn, A.M.; Andersen, M.R.; Biot, M.; Bohlmann, B.; Mahérault-Mougin, S.; Kozak, J.; Osawa, N.; Jang, Y.S.; Remes, H.; Ringsberg, J.; Cammen, J.van der
2009 Conference proceedingsHydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu2017 ISBN: 9780791861387Towards efficient crash analysis of large ship structures Equivalent single layer approach for stiffened orthotropic panels under tensile loading
Körgesaar, Mihkel; Reinaldo, Goncalves; Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki2016 ISBN: 978-87-7475-473-2Influence of welding distortion on the structural stress in thin deck panels
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Avi, Eero; Romanoff, Jani2016 ISBN: 978-87-7475-473-2Fatigue strength modelling of high-performance welds using local approaches
Remes, Heikki; Jelovica, Jasmin; Romanoff, Jani; Lehto, Pauli; Liinalampi, Sami2016 ISBN: 978-87-7475-473-2Use of a Equivalent Single Layer Plate Theory in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Avi, Eero; Reinaldo, Goncalves; Körgesaar, Mihkel; Raikunen, Joni; Remes, Heikki; Niemelä, Ari; Reddy, Junthula; Varsta, Petri2016 ISBN: 978-87-7475-473-2Hull and superstructure interaction using coupled beam method
Toming, Risto; Kerge, Els-Hedvig; Naar, Hendrik; Tabri, Kristjan; Romanoff, Jani; Remes, Heikki2016 ISBN: 978-87-7475-473-2The effect of interacting small defects on the fatigue limit of a medium carbon steel
Åman, Mari; Okazaki, Saburo; Matsunaga, Hisao; Marquis, Gary B.; Remes, Heikki2016 in Procedia Structural Integrity (Elsevier Science B.V.)ISSN: 2452-3216Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials
Frank, Darko; Romanoff, Jani; Remes, Heikki2015 ISBN: 978-1-138-02789-3Influence of Block Building Method on Outfitting Efficiency at an Assembly Shipyard
Kujala, L.M.; Nallikari, M.; Tokola, H.A.; Remes, H.2015 ISBN: 978-1-909024-43-4Fatigue strength of welded extra high-strength and thin steel plates
Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.2015 ISBN: 978-1-138-02789-3The determination of ice-induced loads on ship hull from shear strain measurements
Suominen, Mikko; Romanoff, Jani; Remes, Heikki; Kujala, Pentti2015 ISBN: 978-1-138-02789-3Fatigue crack growth rate in laser-welded web core sandwich panels - fatigue crack propagation in welded base metal
Cernescu, Anghel; Romanoff, Jani; Lehto, Pauli; Remes, Heikki2014 Fatigue assessment of large thin-walled structures with initial distortions
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2014 Microstructure and strain -based fatigue life approach for high-performance welds
Remes, Heikki; Lehto, Pauli; Romanoff, Jani2014 The effect of the secondary bending moment on the fracture strength evaluation of the laser welded joints from a web core sandwich structure
Cernescu, Anghel; Romanoff, Jani; Remes, Heikki2013 in Key Engineering Materials (TRANS TECH PUBLICATIONS)ISSN: 1013-9826Fatigue strength of laser-welded thin plate ship structures based on nominal and structural hot-spot stress approach
Fricke, Wolfgang; Remes, Heikki; Feltz, Olav; Lillemäe, Ingrit; Tchuindjang, Didi; Reinert, Thomas; Nevierov, Alessandro; Sichermann, Wolfgang; Brinkmann, Markus; Kontkanen, Tuomo; Bohlmann, Berend; Molter, Lars2013 Influence of Surface Integrity on the Fatigue Strength of High Strength Steel in Balcony Openings of Cruise Ship Structures
Korhonen, Eero; Remes, Heikki; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo.2013 An Analytical Method for Cabin Deck Fundamental Frequency
Laakso, A.; Romanoff, J.; Remes, H.; Niemelä, A.2013 Hull-Superstructure Interaction Induced Secondary Effects in Passenger Ships
Parmasto, Oliver; Romanoff, Jani; Remes, Heikki2013 ISBN: 978-89-950016-1-5Shear Response of Prismatic Ship Hull Girders
Romanoff, J.; Remes, H.; Varsta, P.; Melk, K.; Naar, H.; Niemelä, A.2013 Cruise and Ferry Experience program for Future Passenger Ship Designers
Ahola, Markus; Romanoff, Jani; Kujala, Pentti; Remes, Heikki; Varsta, Petri2011 ISBN: 978-1-905040-93-3Round-Robin on Local Stress Determination and Fatigue Assessment of Load-Carrying Fillet-Welded Joints
Fricke, W.; Codda, M.; Feltz, O.; Garbatov, Y.; Remes, H.; Risso, G.; Rizzo, C.; Romanoff, J.2011 ISBN: 978-0-203-80811-5Hull/Superstructure-Interaction in Optimized Passenger Ships
Remes, Heikki; Romanoff, J.; Varsta, P.; Naar, H.; Niemelä, A.; Jelovica, J.; Klanac, A.; Bralic, S.2011 ISBN: 978-0-203-80811-5The IMPROVEd chemical tanker
Ehlers, Sören; Klanac, A.; Remes, H.; Kapuscik, K.; Naar, H.; Andric, J.; Zanic, V.; Grgic, M.; Pircalabu, E.; Bair, F.2009 ConStruct - Platform for Conceptual Structural Design
Remes, Heikki; Klanac, A.; Varsta, P.; Ehlers, S.2009 Structural Omni-Optimization of a Tanker
Klanac, Alan; Jelovica, Jasmin; Niemeläinen, Matias; Domagallo, Stanislaw; Remes, Heikki; Romanoff, Jani2008 ISBN: 978-2-9600785-0-3Round Robin study on structural hot-spot and effective notch stress analysis
Fricke, W.; Bollero, A.; Chirica, I.; Garbatov, Y.; Jancart, F.; Kahl, A.; Remes, H.; Rizzo, C.M.; von Selle, H.; Urban, A.; Wei, L.2007 ISBN: 978-0-415-43725-7Fatigue Strength between Arc and Laser Hybrid Welded Joints
Remes, Heikki; Varsta, Petri2007 ISBN: 0-943870-04-6Experimental and Theoretical Investigation of Fatigue Characteristics of Laser Hybrid Welded Joints
Remes, Heikki; Kujala, Pentti2004 ISBN: 3-87743-807-5 (Vol. 1), 3-87743-808-3 (Vol. 2)CO2-laser MAG Weldability of Laser Cutting LASER RAEX Steels, Hull Structural Steel Grade A and High Strength Formable Steel OPTIM RAEX 700 MC
Laitinen, Risto; Kujala, Pentti; Remes, Heikki; Nielsen, Steen Erik2003 Fatigue Strength of Laser and Hybrid Weldements in Shipbuilding Industry
Remes, Heikki2003 Fatigue Charasteristics of CO2-laser MAG Welded joints of Laser Cutting RAEX Steels
Remes, Heikki; Kujala, Pentti; Laitinen, Risto2003 Non-refereed scientific articles
Unrefereed conference proceedingsInfluence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani2014 A new cylindrical cell honeycomb core
Cernescu, Anghel; Faur, Nicolae; Romanoff, Jani; Remes, Heikki2013 Influence of initial distortion of thin 3 mm superstructure decks on hull girder response, IIW Document SC-SHIP-47-13
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2013 Influencing factors on fatigue strength of welded thin plates based on structural stress assessment
Remes, H.; Fricke, W.2013 Influence of the initial distortions on the fatigue assessment of thin stiffened deck panels, IIW Document XIII-2448-12
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani2012 Fatigue assessment of thick plate laser-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani2011 Statistics of weld geometry for a laser-hybrid welded joints and its application within notch stress approach
Remes, Heikki.; Varsta, Petri2009 Rational model to assess fatigue at the early design stage
Remes, H.; Liigsoo, M.; Amrane, A.; Chirica, I.; Giuglea, V.; Giuglea, S.2009 Fatigue Strength Modelling of Laser Welded Joints
Remes, Heikki2003 Publications intended for professional communities
Article in professional journalAalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (Tampere Technology Centre Ltd)ISSN: 0437-6056Shipbuilding Methods & technologies: Reworking the fatigue model.
Remes, Heikki; Romanoff, Jani2013 in The Naval architect (Royal Institution of Naval Architects)ISSN: 0306-0209Model for metal fatigue
Remes, Heikki2013 in Maritime Risk International (Royal Institution of Naval Architects)ISSN: 1742-9404Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (Royal Institution of Naval Architects)ISSN: 0437-6056Article in professional conference proceedingsFatigue strength of thin laser-hybrid welded panels based on small- and full-scale tests
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki2016 Utilization of Homogenized and Non-Local Beam and Plate Theories in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Reddy, Junthula; Reinaldo, Goncalves; Remes, Heikki2016 Characterisation of local grain size variation of welded structural steel.IIW Doc.No IX-2516-15 (IX-L-1137-15)
Lehto, Pauli; Remes, Heikki; Romanoff, Jani; Sarikka, Teemu2015 Fatigue Strength Analysis of Laser-Hybrid Welds in Thin Plate Considering Actual Weld Geometry
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Heikkilä, Sami; Porter, David2015 Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Itävuo, Antti2015 Influence of residual stresses on elasto-plastic response in HFMI-treated welded joint under different load ratios
Mikkola, Eeva; Remes, Heikki; Marquis, Gary2015 Published development or research reportUltimate strength tests of corroded web-core and corrugated-core sandwich beams
Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki2011 Stiffness and strength testing of laser stake welds in steel sandwich panels
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko2006 Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2
Remes, Heikki2003 Fatigue Strength Modelling of Lase Welded Joints
Remes, Heikki2003 Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER
Remes, Heikki; Socha, Grzegorz2003 Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels
Tamminen, Tero; Remes, Heikki2003 Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels
Tamminen, Tero; Remes, Heikki2003 Hattuprofiililla jäykistetyn levykentän väsymislujuus
Remes, H.1999 Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi
Remes, H.; Kujala, P.1997
Hydrogen uptake and its effect on mechanical properties of 18%Cr ferritic stainless steel
Malitckii, Evgenii; Yagodzinskyy, Yuriy; Lehto, Pauli; Remes, Heikki; Hänninen, Hannu
2017 ISBN: 9780791861387
Towards efficient crash analysis of large ship structures Equivalent single layer approach for stiffened orthotropic panels under tensile loading
Körgesaar, Mihkel; Reinaldo, Goncalves; Jelovica, Jasmin; Romanoff, Jani; Remes, Heikki
2016 ISBN: 978-87-7475-473-2
Influence of welding distortion on the structural stress in thin deck panels
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Avi, Eero; Romanoff, Jani
2016 ISBN: 978-87-7475-473-2
Fatigue strength modelling of high-performance welds using local approaches
Remes, Heikki; Jelovica, Jasmin; Romanoff, Jani; Lehto, Pauli; Liinalampi, Sami
2016 ISBN: 978-87-7475-473-2
Use of a Equivalent Single Layer Plate Theory in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Avi, Eero; Reinaldo, Goncalves; Körgesaar, Mihkel; Raikunen, Joni; Remes, Heikki; Niemelä, Ari; Reddy, Junthula; Varsta, Petri
2016 ISBN: 978-87-7475-473-2
Hull and superstructure interaction using coupled beam method
Toming, Risto; Kerge, Els-Hedvig; Naar, Hendrik; Tabri, Kristjan; Romanoff, Jani; Remes, Heikki
2016 ISBN: 978-87-7475-473-2
The effect of interacting small defects on the fatigue limit of a medium carbon steel
Åman, Mari; Okazaki, Saburo; Matsunaga, Hisao; Marquis, Gary B.; Remes, Heikki
2016 in Procedia Structural Integrity (Elsevier Science B.V.)ISSN: 2452-3216
Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials
Frank, Darko; Romanoff, Jani; Remes, Heikki
2015 ISBN: 978-1-138-02789-3
Influence of Block Building Method on Outfitting Efficiency at an Assembly Shipyard
Kujala, L.M.; Nallikari, M.; Tokola, H.A.; Remes, H.
2015 ISBN: 978-1-909024-43-4
Fatigue strength of welded extra high-strength and thin steel plates
Remes, H.; Peltonen, M.; Seppänen, T.; Kukkonen, A.; Liinalampi, S.; Lillemäe, I.; Lehto, P.; Hänninen, H.; Romanoff, J.; Nummela, S.
2015 ISBN: 978-1-138-02789-3
The determination of ice-induced loads on ship hull from shear strain measurements
Suominen, Mikko; Romanoff, Jani; Remes, Heikki; Kujala, Pentti
2015 ISBN: 978-1-138-02789-3
Fatigue crack growth rate in laser-welded web core sandwich panels - fatigue crack propagation in welded base metal
Cernescu, Anghel; Romanoff, Jani; Lehto, Pauli; Remes, Heikki
2014 Fatigue assessment of large thin-walled structures with initial distortions
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2014 Microstructure and strain -based fatigue life approach for high-performance welds
Remes, Heikki; Lehto, Pauli; Romanoff, Jani
2014 The effect of the secondary bending moment on the fracture strength evaluation of the laser welded joints from a web core sandwich structure
Cernescu, Anghel; Romanoff, Jani; Remes, Heikki
2013 in Key Engineering Materials (TRANS TECH PUBLICATIONS)ISSN: 1013-9826
Fatigue strength of laser-welded thin plate ship structures based on nominal and structural hot-spot stress approach
Fricke, Wolfgang; Remes, Heikki; Feltz, Olav; Lillemäe, Ingrit; Tchuindjang, Didi; Reinert, Thomas; Nevierov, Alessandro; Sichermann, Wolfgang; Brinkmann, Markus; Kontkanen, Tuomo; Bohlmann, Berend; Molter, Lars
2013 Influence of Surface Integrity on the Fatigue Strength of High Strength Steel in Balcony Openings of Cruise Ship Structures
Korhonen, Eero; Remes, Heikki; Romanoff, Jani; Niemelä, Ari; Hiltunen, Pasi; Kontkanen, Tuomo.
2013 An Analytical Method for Cabin Deck Fundamental Frequency
Laakso, A.; Romanoff, J.; Remes, H.; Niemelä, A.
2013 Hull-Superstructure Interaction Induced Secondary Effects in Passenger Ships
Parmasto, Oliver; Romanoff, Jani; Remes, Heikki
2013 ISBN: 978-89-950016-1-5
Shear Response of Prismatic Ship Hull Girders
Romanoff, J.; Remes, H.; Varsta, P.; Melk, K.; Naar, H.; Niemelä, A.
2013 Cruise and Ferry Experience program for Future Passenger Ship Designers
Ahola, Markus; Romanoff, Jani; Kujala, Pentti; Remes, Heikki; Varsta, Petri
2011 ISBN: 978-1-905040-93-3
Round-Robin on Local Stress Determination and Fatigue Assessment of Load-Carrying Fillet-Welded Joints
Fricke, W.; Codda, M.; Feltz, O.; Garbatov, Y.; Remes, H.; Risso, G.; Rizzo, C.; Romanoff, J.
2011 ISBN: 978-0-203-80811-5
Hull/Superstructure-Interaction in Optimized Passenger Ships
Remes, Heikki; Romanoff, J.; Varsta, P.; Naar, H.; Niemelä, A.; Jelovica, J.; Klanac, A.; Bralic, S.
2011 ISBN: 978-0-203-80811-5
The IMPROVEd chemical tanker
Ehlers, Sören; Klanac, A.; Remes, H.; Kapuscik, K.; Naar, H.; Andric, J.; Zanic, V.; Grgic, M.; Pircalabu, E.; Bair, F.
2009 ConStruct - Platform for Conceptual Structural Design
Remes, Heikki; Klanac, A.; Varsta, P.; Ehlers, S.
2009 Structural Omni-Optimization of a Tanker
Klanac, Alan; Jelovica, Jasmin; Niemeläinen, Matias; Domagallo, Stanislaw; Remes, Heikki; Romanoff, Jani
2008 ISBN: 978-2-9600785-0-3
Round Robin study on structural hot-spot and effective notch stress analysis
Fricke, W.; Bollero, A.; Chirica, I.; Garbatov, Y.; Jancart, F.; Kahl, A.; Remes, H.; Rizzo, C.M.; von Selle, H.; Urban, A.; Wei, L.
2007 ISBN: 978-0-415-43725-7
Fatigue Strength between Arc and Laser Hybrid Welded Joints
Remes, Heikki; Varsta, Petri
2007 ISBN: 0-943870-04-6
Experimental and Theoretical Investigation of Fatigue Characteristics of Laser Hybrid Welded Joints
Remes, Heikki; Kujala, Pentti
2004 ISBN: 3-87743-807-5 (Vol. 1), 3-87743-808-3 (Vol. 2)
CO2-laser MAG Weldability of Laser Cutting LASER RAEX Steels, Hull Structural Steel Grade A and High Strength Formable Steel OPTIM RAEX 700 MC
Laitinen, Risto; Kujala, Pentti; Remes, Heikki; Nielsen, Steen Erik
2003 Fatigue Strength of Laser and Hybrid Weldements in Shipbuilding Industry
Remes, Heikki
2003 Fatigue Charasteristics of CO2-laser MAG Welded joints of Laser Cutting RAEX Steels
Remes, Heikki; Kujala, Pentti; Laitinen, Risto
2003 Influence of grain size distribution on the Hall-Petch relationship of welded structural steel.IIW Doc.No IX-2488-14 (IX-L-1120-14)
Lehto, Pauli; Remes, Heikki; Saukkonen, Tapio; Hänninen, Hannu; Romanoff, Jani
2014 A new cylindrical cell honeycomb core
Cernescu, Anghel; Faur, Nicolae; Romanoff, Jani; Remes, Heikki
2013 Influence of initial distortion of thin 3 mm superstructure decks on hull girder response, IIW Document SC-SHIP-47-13
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2013 Influencing factors on fatigue strength of welded thin plates based on structural stress assessment
Remes, H.; Fricke, W.
2013 Influence of the initial distortions on the fatigue assessment of thin stiffened deck panels, IIW Document XIII-2448-12
Lillemäe, Ingrit; Remes, Heikki; Romanoff, Jani
2012 Fatigue assessment of thick plate laser-welded T-joints
Frank, Darko; Remes, Heikki; Romanoff, Jani
2011 Statistics of weld geometry for a laser-hybrid welded joints and its application within notch stress approach
Remes, Heikki.; Varsta, Petri
2009 Rational model to assess fatigue at the early design stage
Remes, H.; Liigsoo, M.; Amrane, A.; Chirica, I.; Giuglea, V.; Giuglea, S.
2009 Fatigue Strength Modelling of Laser Welded Joints
Remes, Heikki
2003 Publications intended for professional communities
Article in professional journalAalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu2015 in HITSAUSTEKNIIKKA (Tampere Technology Centre Ltd)ISSN: 0437-6056Shipbuilding Methods & technologies: Reworking the fatigue model.
Remes, Heikki; Romanoff, Jani2013 in The Naval architect (Royal Institution of Naval Architects)ISSN: 0306-0209Model for metal fatigue
Remes, Heikki2013 in Maritime Risk International (Royal Institution of Naval Architects)ISSN: 1742-9404Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko2012 in HITSAUSTEKNIIKKA (Royal Institution of Naval Architects)ISSN: 0437-6056Article in professional conference proceedingsFatigue strength of thin laser-hybrid welded panels based on small- and full-scale tests
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki2016 Utilization of Homogenized and Non-Local Beam and Plate Theories in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Reddy, Junthula; Reinaldo, Goncalves; Remes, Heikki2016 Characterisation of local grain size variation of welded structural steel.IIW Doc.No IX-2516-15 (IX-L-1137-15)
Lehto, Pauli; Remes, Heikki; Romanoff, Jani; Sarikka, Teemu2015 Fatigue Strength Analysis of Laser-Hybrid Welds in Thin Plate Considering Actual Weld Geometry
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Heikkilä, Sami; Porter, David2015 Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Itävuo, Antti2015 Influence of residual stresses on elasto-plastic response in HFMI-treated welded joint under different load ratios
Mikkola, Eeva; Remes, Heikki; Marquis, Gary2015 Published development or research reportUltimate strength tests of corroded web-core and corrugated-core sandwich beams
Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki2011 Stiffness and strength testing of laser stake welds in steel sandwich panels
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko2006 Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2
Remes, Heikki2003 Fatigue Strength Modelling of Lase Welded Joints
Remes, Heikki2003 Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER
Remes, Heikki; Socha, Grzegorz2003 Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels
Tamminen, Tero; Remes, Heikki2003 Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels
Tamminen, Tero; Remes, Heikki2003 Hattuprofiililla jäykistetyn levykentän väsymislujuus
Remes, H.1999 Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi
Remes, H.; Kujala, P.1997
Aalto University: Research and Education in Welded Structures
Remes, Heikki; Vilaca, Pedro; Romanoff, Jani; Marquis, Gary; Hänninen, Hannu
2015 in HITSAUSTEKNIIKKA (Tampere Technology Centre Ltd)ISSN: 0437-6056
Shipbuilding Methods & technologies: Reworking the fatigue model.
Remes, Heikki; Romanoff, Jani
2013 in The Naval architect (Royal Institution of Naval Architects)ISSN: 0306-0209
Model for metal fatigue
Remes, Heikki
2013 in Maritime Risk International (Royal Institution of Naval Architects)ISSN: 1742-9404
Hitsaustutkimus Aalto-yliopistossa
Hänninen, Hannu; Marquis, Gary; Glinka, Grzegorz; Remes, Heikki; Romanoff, Jani; Hurme, Susan; Mikkola, Eeva; Lindroth, Pasi; Brederholm, Anssi; Peltonen, Mikko
2012 in HITSAUSTEKNIIKKA (Royal Institution of Naval Architects)ISSN: 0437-6056
Fatigue strength of thin laser-hybrid welded panels based on small- and full-scale tests
Lillemäe, Ingrit; Liinalampi, Sami; Remes, Heikki
2016 Utilization of Homogenized and Non-Local Beam and Plate Theories in Ship Structural Design
Romanoff, Jani; Jelovica, Jasmin; Reddy, Junthula; Reinaldo, Goncalves; Remes, Heikki
2016 Characterisation of local grain size variation of welded structural steel.IIW Doc.No IX-2516-15 (IX-L-1137-15)
Lehto, Pauli; Remes, Heikki; Romanoff, Jani; Sarikka, Teemu
2015 Fatigue Strength Analysis of Laser-Hybrid Welds in Thin Plate Considering Actual Weld Geometry
Liinalampi, Sami; Remes, Heikki; Lehto, Pauli; Lillemäe, Ingrit; Heikkilä, Sami; Porter, David
2015 Influence of weld quality on the fatigue strength of thin normal and high strength steel butt joints
Lillemäe, Ingrit; Remes, Heikki; Liinalampi, Sami; Itävuo, Antti
2015 Influence of residual stresses on elasto-plastic response in HFMI-treated welded joint under different load ratios
Mikkola, Eeva; Remes, Heikki; Marquis, Gary
2015 Published development or research reportUltimate strength tests of corroded web-core and corrugated-core sandwich beams
Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki2011 Stiffness and strength testing of laser stake welds in steel sandwich panels
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko2006 Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2
Remes, Heikki2003 Fatigue Strength Modelling of Lase Welded Joints
Remes, Heikki2003 Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER
Remes, Heikki; Socha, Grzegorz2003 Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels
Tamminen, Tero; Remes, Heikki2003 Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels
Tamminen, Tero; Remes, Heikki2003 Hattuprofiililla jäykistetyn levykentän väsymislujuus
Remes, H.1999 Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi
Remes, H.; Kujala, P.1997
Ultimate strength tests of corroded web-core and corrugated-core sandwich beams
Jelovica, Jasmin; Romanoff, Jani; Ehlers, Soren; Remes, Heikki
2011 Stiffness and strength testing of laser stake welds in steel sandwich panels
Romanoff, Jani; Remes, Heikki; Socha, Grzegorz; Jutila, Mikko
2006 Fatigue test of CO2-laser hybrid and submerged arc welded butt joint of RAEX S275 LASER and NVA.Volume 1 and 2
Remes, Heikki
2003 Fatigue Strength Modelling of Lase Welded Joints
Remes, Heikki
2003 Fatigue test of CO2-laser, CO2-laser hybrid and submerged arc welded material of RAEX S275 LASER
Remes, Heikki; Socha, Grzegorz
2003 Fatigue test of laser, laser hybrid and arc welded butt and T-joints of RAEX S275 LASER, RAEX 420MC, RAEX 700 OPTIM, GL-A36TM and NVA steels
Tamminen, Tero; Remes, Heikki
2003 Fatigue Tests of Laser, Laser Hybrid and Arc Welded Butt and T-joints of Raex S275 Laser, Raec 420MC Laser, Raex 700 optim, GLA36TM and NVA Steels
Tamminen, Tero; Remes, Heikki
2003 Hattuprofiililla jäykistetyn levykentän väsymislujuus
Remes, H.
1999 Nosturirakenteen pääkannattimessa toteutetun laserhitsatun limiliitoksen lujuusanalyysi
Remes, H.; Kujala, P.
1997 Read about executive education
Other experts
Michael Minye Tang
Biography Michael Tang joined New York University Stern School of Business as an Assistant Professor of Accounting in July 2012. Professor Tang's research interests center on corporate disclosure as it relates to capital market participants such as financial analysts. He is particularly interest...
Patrick Gregory
Academic Division: FinancePatrick Gregory, CFA is the Managing Director of the Stephen D. Cutler Center for Investments and Finance, Director of the Babson College Fund, and a lecturer in the Finance Division at Babson College. He is also the faculty representative on the Board of Trustees Invest...
Loren Fykes
Biography: Internet/media business development and strategic partnership professional with strong connections in japan and throughout Asia. Mr. Fykes is fluent written and spoken Japanese and comfortable with all aspects of creating and consulting on new businesses and industries including overal...
Looking for an expert?
Contact us and we'll find the best option for you.