Mark Hughes
Professor, Wood Technology at Aalto University School of Business
Schools
- Aalto University School of Business
Links
Biography
Aalto University School of Business
Peer-reviewed scientific articles
Journal article-refereed, Original researchSensory and emotional perception of wooden surfaces through fingertip touch
Bhatta, Shiv R.; Tiippana, Kaisa; Vahtikari, Katja; Hughes, Mark; Kyttä, Marketta2017 in FRONTIERS IN PSYCHOLOGY (Frontiers Research Foundation)ISSN: 1664-1078The influence of extractives on the sorption characteristics of Scots pine (Pinus sylvestris L.)
Vahtikari, Katja; Rautkari, Lauri; Noponen, Tuula; Lillqvist (née Laine), Kristiina; Hughes, Mark2017 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Surface modification of birch veneer by peroxide bleaching
Yamamoto, Akio; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani; Rautkari, Lauri2017 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719The effect of hydration on the micromechanics of regenerated cellulose fibres from ionic liquid solutions of varying draw ratios
Bulota, M.; Michud, A.; Hummel, M.; Hughes, M.; Sixta, H.2016 in CARBOHYDRATE POLYMERS (ELSEVIER SCI LTD)ISSN: 0144-8617Building material naturalness: Perceptions from Finland, Norway and Slovenia
Burnard, Michael D; Nyrud, Anders Q; Bysheim, Kristian; Kutnar, Andreja; Vahtikari, Katja; Hughes, Mark2016 in INDOOR AND BUILT ENVIRONMENT (SAGE Publications Ltd)ISSN: 1420-326XAssessing the susceptibility of hemp fibre to the formation of dislocations during processing
Hernandez-Estrada, Albert; Gusovius, Hans-Jörg; Müssig, Jörg; Hughes, Mark2016 in INDUSTRIAL CROPS AND PRODUCTS (Elsevier)ISSN: 0926-6690Influence of temperature of thermal treatment on surface densification of spruce
Kariz, Mirko; Kuzman, Manja Kitek; Sernek, Milan; Hughes, Mark; Rautkari, Lauri; Kamke, Frederick A.; Kutnar, Andreja2016 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Wood densification and thermal modification hardness, set-recovery and micromorphology
Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Hughes, Mark2016 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Surface densification of acetylated wood
Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Hughes, Mark; Lankveld, Chiel2016 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer
Rohumaa, Anti; Antikainen, Toni; Hunt, Christopher G.; Frihart, Charles R.; Hughes, Mark2016 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Effect of log soaking and the temperature of peeling on the properties of Rotary-cut birch (Betula pendula Roth) veneer bonded with phenol-formaldehyde adhesive
Rohumaa, Anti; Yamamoto, Akio; Hunt, Christopher G.; Frihart, Charles R.; Hughes, Mark; Kers, Jaan2016 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)ISSN: 1930-2126The potential for cascading wood from demolished buildings the condition of recovered wood through a case study in Finland
Sakaguchi, D.; Takano, A.; Hughes, M.2016 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)ISSN: 2042-6445The effect of temperature and moisture content on the fracture behaviour of spruce and birch
Tukiainen, Pekka; Hughes, Mark2016 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830The effect of elevated temperature and high moisture content on the fracture behaviour of thermally modified spruce
Tukiainen, Pekka; Hughes, Mark2016 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461The cellular level mode i fracture behaviour of spruce and birch in the RT crack propagation system
Tukiainen, Pekka; Hughes, Mark2016 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence
Antikainen, Toni; Rohumaa, Anti; Hunt, Christopher G.; Levirinne, Mari; Hughes, Mark2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Comparison of the accuracy of two on-line industrial veneer moisture content and density measurement systems
Antikainen, Toni; Rohumaa, Anti; Hughes, Mark; Kairi, Matti2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging
Antikainen, Toni; Eskelinen, Joona; Rohumaa, Anti; Vainio, Teemu; Hughes, Mark2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Estimating birch veneer (Betula pendula Roth) moisture content using infrared technology
Antikainen, Toni; Rohumaa, Anti; Bulota, Mindaugas; Kotilahti, Timo; Hughes, Mark2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Cross-linking of cellulose and poly(ethylene glycol) with citric acid
de Cuadro, Pamela; Belt, Tiina; Kontturi, Katri S.; Reza, Mehedi; Kontturi, Eero; Vuorinen, Tapani; Hughes, Mark2015 in REACTIVE AND FUNCTIONAL POLYMERS (Elsevier)ISSN: 1381-5148The toughness of hygrothermally modified wood: COST Action FP0904 2010-2014: Thermo-hydro-mechanical wood behavior and processing
Hughes, Mark; Hill, Callum; Pfriem, Alexander2015 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Toward energy efficiency through an optimized use of wood: The development of natural hydrophobic coatings that retain moisture-buffering ability
Lozhechnikova, Alina; Vahtikari, Katja; Hughes, Mark; Österberg, Monika2015 in Energy and Buildings (Elsevier Science)ISSN: 0378-7788The effect of material selection on life cycle energy balance: A case study on a hypothetical building model in Finland
Takano, Atsushi; Pal, Sudip Kumar; Kuittinen, Matti; Alanne, Kari; Hughes, Mark; Winter, Stefan2015 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0360-1323Life cycle assessment of wood construction according to the normative standards
Takano, Atsushi; Hafner, Annette; Linkosalmi, Lauri; Ott, Stephan; Hughes, Mark; Winter, Stefan2015 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768The Effect of Hydrothermal Treatment on Color Stability and Chemical Properties of Birch Veneer Surfaces
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani2015 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)The chemical characteristics of squeezable sap from silver birch (Betula pendula) logs hydrothermally treated at 70 °C: the effect of treatment time on the concentration of water extracts
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Chemical characteristics of squeezable sap of hydrothermally treated silver birch logs (Betula pendula): effect of treatment time and the quality of the soaking water in pilot scale experiment
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani2015 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile
Antikainen, Toni; Paajanen, Olli; Rautkari, Lauri; Kutnar, Andreja; Kamke, Frederick A.; Hughes, Mark2014 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Experimental validation of green wood peeling assisted by IR heating - some considerations of the analytical system design
Dupleix, Anna; Batsale, Jean-Christophe; Kusiak, Andrzej; Hughes, Mark; Denaud, Louis Etienne2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Micromorphological studies of surface densified wood
Laine, Kristiina; Segerholm, Kristoffer; Wålinder, Magnus; Rautkari, Lauri; Ormondroyd, Graham; Hughes, Mark; Jones, Dennis2014 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C
Rautkari, Lauri; Honkanen, Juhani; Hill, Callum A.S.; Ridley-Ellis, Daniel; Hughes, Mark2014 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768The influence of felling season and log-soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer
Rohumaa, Anti; Hunt, Christopher G.; Frihart, Charles R.; Saranpää, Pekka; Ohlmeyer, Martin; Hughes, Mark2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Factors influencing properties of parallel laminated binderless bonded plywood manufactured from rotary cut birch (Betula pendula L.).
Ruponen, Jussi; Rautkari, Lauri; Belt, Tiina; Hughes, Mark2014 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)ISSN: 2042-6445Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP)
Solala, Iina; Antikainen, Toni; Reza, Mehedi; Johansson, Leena-Sisko; Hughes, Mark; Vuorinen, Tapani2014 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830A multidisciplinary approach to sustainable building material selection A case study in a Finnish context
Takano, Atsushi; Hughes, Mark; Winter, Stefan2014 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0360-1323Greenhouse gas emission from construction stage of wooden buildings
Takano, Atsushi; Pittau, Francesco; Hafner, Annette; Ott, Stephan; Hughes, Mark; De Angelis, Enrico2014 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)ISSN: 2042-6445Comparison of life cycle assessment databases: A case study on building assessment
Takano, Atsushi; Winter, Stefan; Hughes, Mark; Linkosalmi, Lauri2014 in BUILDING AND ENVIRONMENT (PERGAMON-ELSEVIER SCIENCE LTD)ISSN: 0360-1323Soy protein-nanocellulose composite aerogels
Arboleda, Julio C.; Hughes, Mark; Lucia, Lucian A.; Laine, Janne; Ekman, Kalle; Rojas, Orlando J.2013 in CELLULOSE (SPRINGER)ISSN: 0969-0239Mechanical behavior, structure, and reinforcement processes of TEMPO-oxidized cellulose reinforced poly(lactic) acid
Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka2013 in POLYMER COMPOSITES (WILEY-BLACKWELL)ISSN: 0272-8397Mid-infrared absorption properties of green wood
Dupleix, Anna; Meneses, Domingos De Sousa; Hughes, Mark; Marchal, Rémy2013 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies
Dupleix, Anna; Denaud, Louis-Etienne; Bleron, Laurent; Marchal, Rémy; Hughes, Mark2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments
Dupleix, Anna; Ahmedou, Sid Ahmed Ould; Bleron, Laurent; Rossi, Frédéric; Hughes, Mark2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Measuring the thermal properties of green wood by the transient plane source (TPS) technique
Dupleix, Anna; Kusiak, Andrzej; Hughes, Mark; Rossi, Fréderic2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Water vapour sorption behaviour of thermally modified wood
Hill, C.A.S.; Ramsay, J.; Laine, K.; Rautkari, Lauri; Hughes, Mark2013 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)ISSN: 2042-6445Experiments on the effective compliance in the radial-tangential plane of Norway spruce
Karakoc, Alp; Tukiainen, Pekka; Freund, Jouni; Hughes, Mark2013 in COMPOSITE STRUCTURES (Elsevier BV)ISSN: 0263-8223Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood
Laine, Kristiina; Belt, Tiina; Rautkari, Lauri; Ramsay, James; Hill, Callum AS.; Hughes, Mark2013 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Analysing the density profile characteristics of surface densified solid wood using a computational approach
Laine, Kristiina; Antikainen, Toni; Rautkari, Lauri; Hughes, Mark2013 in INTERNATIONAL WOOD PRODUCTS JOURNAL (Maney Publishing)ISSN: 2042-6445The effect of process parameters on the hardness of surface densified Scots pine solid wood
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Kutnar, Andreja2013 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification
Rautkari, Lauri; Laine, Kristiina; Kutnar, Andreja; Medved, Sergej; Hughes, Mark2013 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde bonded birch plywood
Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Logren, Janne2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830The fracture behavior of birch and spruce in the radial-tangential crack propagation direction at the scale of the growth ring
Tukiainen, Pekka; Hughes, Mark2013 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Colorimetric Behavior and Seasonal Characteristic of Xylem Sap Obtained by Mechanical Compression from Silver Birch (Betula pendula)
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpää, Pekka; Andberg, Martina; Vuorinen, Tapani2013 in ACS SUSTAINABLE CHEMISTRY AND ENGINEERING (AMER CHEMICAL SOC)Micromechanics of TEMPO-oxidized fibrillated Cellulose Composites
Bulota, Mindaugas; Tanpichai, Supachok; Hughes, Mark; Eichhorn, Stephen J.2012 in ACS APPLIED MATERIALS AND INTERFACES (AMER CHEMICAL SOC)ISSN: 1944-8244Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose
Bulota, Mindaugas; Hughes, Mark2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)
Bulota, Mindaugas; Kreitsmann, Kätlin; Hughes, Mark; Paltakari, Jouni2012 in JOURNAL OF APPLIED POLYMER SCIENCE (Wiley-Blackwell)ISSN: 0021-8995Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy
Ganne-Chédeville, Christelle; Jääskeläinen, Anna-Stiina; Froidevaux, Julien; Hughes, Mark; Navi, Parviz2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830The water vapour sorption properties of thermally modified and densified wood
Hill, Callum A. S.; Ramsay, James; Keating, Barbra; Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Constant, Bastien2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Ultrastructural evaluation of compression wood-like properties of common juniper (Juniperus communis L)
Hänninen, Tuomas; Tukiainen, Pekka; Svedström, Kirsi; Serimaa, Ritva; Saranpää, Pekka; Kontturi, Eero; Hughes, Mark; Vuorinen, Tapani2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure
Hänninen, Tuomas; Thygesen, Anders; Mehmood, Shahid; Madsen, Bo; Hughes, Mark2012 in INDUSTRIAL CROPS AND PRODUCTS (Elsevier)ISSN: 0926-6690XPS and the medium-dependent surface adaptation of cellulose in wood.
Johansson, Leena-Sisko; Campbell, J.M.; Hänninen, Tuomas; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Hughes, Mark; Laine, Janne2012 in SURFACE AND INTERFACE ANALYSIS (John Wiley and Sons Ltd)ISSN: 0142-2421Thermodynamic characteristics of surface densified solid Scots pine wood
Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2012 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768The Fracture Toughness and Properties of Thermally Modified Beech and Ash at Different Moisture Contents
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose L.2012 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719A study by X-ray photoelectron spectroscopy (XPS) of the chemistry of the surface of Scots pine (Pinus sylvestris L.) modified by friction
Rautkari, Lauri; Hänninen, Tuomas; Johansson, Leena-Sisko; Hughes, Mark2012 in HOLZFORSCHUNG (WALTER DE GRUYTER GMBH)ISSN: 0018-3830Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models
Bulota, M.; Jääskeläinen, A. S.; Paltakari, J.; Hughes, M.2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Kink bands in bast fibres and their effects on mechanical properties
Hänninen, T.; Michud, A.; Hughes, M.2011 in PLASTICS RUBBER AND COMPOSITES (Maney Publishing)ISSN: 1465-8011Surface modification of Scots pine: the effect of process parameters on the through thickness density profile
Rautkari, Lauri; Laine, Kristiina; Laflin, Nick; Hughes, Mark2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Potential error in density profile measurements for wood composites
Rautkari, Lauri; Kamke, Frederick A.; Hughes, Mark2011 in EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (SPRINGER)ISSN: 0018-3768Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite
Rautkari, Lauri; Kamke, Frederick A.; Hughes, Mark2011 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719The Combined Effects of Boron and oil Heat treatment on Beech and Scots Pine Wood Properties. Part 1: Boron Leaching, Thermogravimetric Analysis and Chemical Composition
Tomak, Eylem Dizman; Hughes, Mark; Yildiz, Umit C.; Viitanen, Hannu2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance
Tomak, Eylem Dizman; Viitanen, Hannu; Yildiz, Umit C.; Hughes, Mark2011 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Dimensional stability, UV resistance, and static mechanical properties of Scots pine chemically modified with alkylene expoxides
Pandey, Krishna K.; Hughes, Mark; Vuorinen, Tapani2010 in Bioresources (NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI)Properties and set-recovery of surface densified Norway spruce and European beech
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark2010 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719Surface modification of wood using friction
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark2009 in WOOD SCIENCE AND TECHNOLOGY (Springer Verlag)ISSN: 0043-7719The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Liu, Q.; Hughes, M.2008 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)ISSN: 1359-835XDeformation and Fracture Behaviour of Flax Fibre Reinforced Thermosetting Polymer Matrix Composites
Hughes, Mark; Carpenter, James; Hill, Callum2007 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)Structural Biocomposites from Flax Part II: The use of PEG and PVA as interfacial compatibilising agents
Liu, Q.; Stuart, T.; Hughes, M.; Sharma, H.S.S.; Lyons, G.2007 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)Relationship Between Sensory Quality and Volatile Compounds of Elderflower (Sambucus nigra L) Extracts
Kaack, K.; Christensen, L.P.; Hughes, M.; Eder, R.2006 in EUROPEAN FOOD RESEARCH AND TECHNOLOGY (Springer Verlag)Determining the physical properties of flax fibre for industrial applications: the influence of agronomic practice
Norton, A.J.; Bennett, S.J.; Hughes, Mark; Dimmock, J.P.R.E.; Wright, D.; Newman, G.; Harris, I.M.; Edwards-Jones, G.2006 in ANNALS OF APPLIED BIOLOGY (Wiley-Blackwell)ISSN: 0003-4746Structural Biocomposites from Flax Part I: Effect of Bio-technical Fibre Modification on Composite Properties
Stuart, T.; Liu, Q.; Hughes, M.; McCall, R.D.; Sharma, H.S.S.; Norton, A.2006 in COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (Elsevier Limited)The Relationship Between Sensory Quality and Volatile Compounds in Raw Juice Processed from Elderberries (Sambucus nigra L.)
Kaack, K.; Christensen, L.P.; Hughes, M.; Eder, R.2005 in EUROPEAN FOOD RESEARCH AND TECHNOLOGY (Springer Verlag)The fracture toughness of bast fibre reinforced polyester composites Part 1 Evaluation and analysis
Hughes, M.; Hill, C. A. S.; Hague, J. R. B.2002 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Strain induced shifts in the Raman spectra of natural cellulose fibers
Eichhorn, S. J.; Hughes, M.; Snell, R.; Mott, L.2000 in Journal of Materials Science Letters (Chapman & Hall)ISSN: 0261-8028An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity
Hughes, Mark; Sèbe, Gilles; Hague, Jamie; Hill, Callum; Spear, Morwenna; Mott, Laurence2000 in COMPOSITE INTERFACES (Taylor and Francis Ltd.)ISSN: 0927-6440RTM hemp fibre-reinforced polyester composites
Sèbe, Gilles; Cetin, Nihat S.; Hill, Callum A.S.; Hughes, Mark2000 in APPLIED COMPOSITE MATERIALS (Springer Netherlands)ISSN: 0929-189XReview article, Literature review, Systematic reviewDefects in natural fibres: their origin, characteristics and implications for natural fibre reinforced composites
Hughes, Mark2012 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Natural Fibre Reinforced Composites Opportunities and Challenges
Hill, Callum; Hughes, Mark2010 in JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (American Scientific Publishers)ISSN: 1556-6560Biocomposites Technology, Environmental Credentials and Market Forces
Fowler, Paul A.; Hughes, J. Mark; Elias, Robert M.2006 in JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (John Wiley and Sons Ltd)ISSN: 0022-5142Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J.; Baillie, C. A.; Zafeiropoulos, N.; Mwaikambo, L. Y.; Ansell, M. P.; Dufresne, A.; Entwistle, K. M.; Herrera-Franco, P. J.; Escamilla, G. C.; Groom, L.; Hughes, M.; Hill, C.; Rials, T. G.; Wild, P. M.2001 in JOURNAL OF MATERIALS SCIENCE (SPRINGER)ISSN: 0022-2461Book section, Chapters in research booksPlywood and other veneer-based products
Hughes, Mark; Ansell, M.P.2015 in Woodhead Publishing Series in Composites Science and Engineering (Woodhead Publishing)ISBN: 978-1-78242-454-3Influence of surface densification of wood on its dynamic wettability and surface energy
Petric, Marko; Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2013 ISBN: 9781118472927Applications
Hughes, M.2004 Quantifying the Range of Properties in Natural Raw Material Origin Polymers and Fibres
Hughes, M.2004 Conference proceedingsLathe check formation and their impact on evaluations of veneer-based panel bond quality
Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Kers, Jaan2016 ISBN: 9783903039001The effect of wood anatomy and coatings on the moisture buffering performance of wooden surfaces
Vahtikari, Katja; Noponen, Tuula; Hughes, Mark2016 ISBN: 9783903039001SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION
Ruponen, Jussi; Rautkari, Lauri; Ohlmeyer, Martin; Hughes, Mark2015 ISBN: 978-80-7509-255-7Properties of high-temperature thermomechanical pulp (HT-TMP)
Solala, L.; Antikainen, T.; Reza, M.; Hughes, M.; Vuorinen, T.2014 Comparision of life cycle assessment databases for building assessment
Takano, Atsushi; Winter, Stefan; Hughes, Mark2014 The untapped potential of wood in developing energy-efficient spaces
Vahtikari, Katja; Cronhjort, Yrsa; Hughes, Mark; Linkosalmi, Lauri2014 Physical and mechanical properties of TEMPO-oxidized cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Hughes, Mark2010 MICRO-STRESS STATISTICS OF HONEYCOMB MATERIAL
Freund, Jouni; Tuhkuri, Jukka; Hughes, Mark2010 Origin of kink bands in bast fibres and their effects on the fibre strength
Hänninen, Tuomas; Alam, Md.; Michud, Anne; Hughes, Mark2010 A Fracture Mechanics Study of Thermally Modified Beech for Structural Applications
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose L.2010 Wood surface densification using different methods
Rautkari, Lauri; Kutnar, Andreja; Hughes, Mark; Kamke, Frederick2010 Properties and chemical changes of surface densified wood
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric2010 Fracture of Spruce and Birch in the Rt Crack Propagation Direction Based on Digital Image Correlation Analysis of Esem Images
Tukiainen, Pekka; Hughes, Mark2010 Evaluation of Parameters Influencing the VOC Emissions from Plywood
Ohlmeyer, Martin; Rohumaa, Anti; Antikainen, Toni; Hughes, Mark2009 Sustainable Composites from Wood Nature’s Biodegradable Polymer: Opportunities and Challenges
Hughes, Mark2008 An innovative thermo densification method for wooden surfaces
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark2008 Factors Influencing the Properties of Veneer-Based Products
Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin2008 Fracture of spruce and birch in the RT crack propagation direction
Tukiainen, Pekka; Hughes, Mark2008 Challenges in surface measurement: a comparison of simulated and real surface topography measurements in birch veneer
Honkanen, J.; Hughes, M.2007 Challenges in the Online Characterization of the Veneer Surface Topography
Honkanen, J.; Hughes, M.2007 Challenges in the characterization of the wood surface: A simulation approach.
Honkanen, J.; Hughes, M.2007 Raw Material and Process Factors Influencing Bond Strength Development in Veneer-Based Products
Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin; Kallio, Timo2007 ISBN: 978-1-84220-097-1Process Factors Influencing Birch (Betula pendula Roth) Veneer Surface Properties and Bond Strength Development in Veneer-Based Products
Rohumaa, Anti; Antikainen, Toni; Hughes, Mark; Ohlmeyer, Martin2007 Non-refereed scientific articles
Book sectionComposites Historical, contemporary & future applications
Hänninen, Tuomas; Hughes, Mark2010 ISBN: 978-0-470-69508-1Unrefereed conference proceedingsThe behaviour of sorption hysteresis in the water vapour sorption isotherm of thermally modified wood
Hill, Callum AS; Ramsay, James; Rautkari, Lauri; Hughes, Mark; Laine, Kristiina2013 Set-recovery of densified and thermally modified wood under repeated soaking-drying-cycles
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Increasing solid wood density by compression
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Adhesion of polyurethane coating on surface densified Scots pine wood
Laine, Kristiina; Rautkari, Lauri; Kricej, Borut; Pavlic, Matjaz; Petric, Marko; Hughes, Mark; Kutnar, Andreja2013 Coated surface densified wood: water vapour absorption and desorption related dimensional changes
Petric, Marko; Hughes, Mark; Kricej, Borut; Kutnar, Andreja; Laine, Kristiina; Medved, Sergej; Pavlic, Matjaž; Rautkari, Lauri2013 Artificial accelerated ageing of surface densified spruce and pine wood
Petric, Marko; Kricej, Borut; Medved, Sergej; Pavlic, Matjaz; Laine, Kristiina; Hughes, Mark; Rautkari, Lauri; Kutnar, Andreja2013 Studies on heat-treated vibrational welded wood
Ruponen, Jussi; Rhême, Martin; Ferrari, Silvia; Rautkari, Lauri; Hughes, Mark2013 Internal vapour pressure in wood based panels during hot-pressing process
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2013 High-temperature thermomechanical pulp as a potential reinforcing element in composites
Solala, Iina; Antikainen, Toni; Hughes, Mark; Vuorinen, Tapani2013 in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY (JOHN WILEY & SONS)ISSN: 0065-7727Acetylated TEMPO oxidized cellulose as reinforcing agent of poly (lactic) acid (PLA)
Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka2012 ISBN: 978-88-88785-33-2Nanocellulose as a toughening agent
Bulota, Mindaugas; Hughes, Mark2012 ISBN: 978-951-38-7880-1ISSN: 2241-1211Dynamic wettability of surface densified wood in open system
Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2012 Removing set-recovery of surface densified wood by heat-treatment (preliminary results)
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 Brinell hardness of surface densified Scots pine - The effect of process parameters.
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-961-6144-35-3Influence of Vacuum Atmosphere Thermal Modification on the Bond Stability of Vibrational Welded Wood in Moist Conditions
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 Plywood manufacture without adhesives
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-609-02-0581-5Accumulation of chemical substances in the xylem sap and seasonal characteristics in silver birch (Betula pendula) obtained by mechanical compression.
Yamamoto, Akio; Kontturi, Eero; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani2012 Preparation, characterization and mechanical properties of acetylated microfbrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 An investigation into the mechanical behaviour of surface-modified fibrillated cellulose reinforced composites
Bulota, M.; Hänninen, T.; Jääskeläinen, A-S.; Kontturi, Eero; Hughes, M.2011 Wood surface densification by compression: Analysing the effect of process parameters
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Laflin, Nick2011 ISBN: 978-3-9523787-0-0Wood surface densification using different techniques
Rautkari, Lauri; Hughes, Mark2011 Peeling checks and their effect on phenol formaldehyde bonded birch plywood
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Bond properties of binderless bonded spruce plywood during immersion
Ruponen, Jussi; Rautkari, Lauri; Paajanen, Olli; Hughes, Mark2011 Studies on self-bonded plywood
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2011 A Preliminary study into the properties of laminated viscoelastic-thermal- compressed wood
Rautkari, Lauri; Hughes, Mark; Kamke, Frederick2010 Enhancing the Properties of Plywood Produced by Auto-adhesion
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2010 Measurement of Moisture Content and Density in Birch (Betual pendula) Veneer Using Microwave Technology
Antikainen, T.; Rohumaa, A.; Hughes, M.; Kairi, M.2007 Sustainable Composites
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; McCall, D.2005 Structural Biocomposites from Flax: Manipulation of Fibre Architecture and Interface Engineering
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; Carpenter, J.2005 Mechanical Properties and Deformation Behaviour of Flax Fibre Composites
Carpenter, J.; Hughes, M.; Hill, C.2003 Publications intended for professional communities
Article in professional conference proceedingsEffect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Published development or research reportThe Mesoscale Compressive Mechanical Properties of Norway Spruce
Estrada, Albert Hernandez; Hughes, Mark2014 Interfaces in wood-based materials
Rohumaa, Anti; Johansson, Leena-Sisko; Yamamoto, Akio; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Laine, Janne; Hughes, Mark2010 Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose2009 The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products
Rohumaa, Anti; Paajanen, Olli; Hughes, Mark; Kairi, Matti2006 Text book or professional handbook or guidebook or dictionaryFunctional Wood
Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja2016 in Aalto University publication series CROSSOVER (Aalto University)ISBN: 978-952-60-6872-5ISSN: 1799-4977FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris2012 ISBN: 978-2-9526276-1-0Tough cellulose reinforced composites
Bulota, Mindaugas; Hughes, Mark2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)ISSN: 1388-0209Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Fiber and material properties of Juniperus communis
Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727
Sensory and emotional perception of wooden surfaces through fingertip touch
The influence of extractives on the sorption characteristics of Scots pine (Pinus sylvestris L.)
Surface modification of birch veneer by peroxide bleaching
The effect of hydration on the micromechanics of regenerated cellulose fibres from ionic liquid solutions of varying draw ratios
Building material naturalness: Perceptions from Finland, Norway and Slovenia
Assessing the susceptibility of hemp fibre to the formation of dislocations during processing
Influence of temperature of thermal treatment on surface densification of spruce
Wood densification and thermal modification hardness, set-recovery and micromorphology
Surface densification of acetylated wood
The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer
Effect of log soaking and the temperature of peeling on the properties of Rotary-cut birch (Betula pendula Roth) veneer bonded with phenol-formaldehyde adhesive
The potential for cascading wood from demolished buildings the condition of recovered wood through a case study in Finland
The effect of temperature and moisture content on the fracture behaviour of spruce and birch
The effect of elevated temperature and high moisture content on the fracture behaviour of thermally modified spruce
The cellular level mode i fracture behaviour of spruce and birch in the RT crack propagation system
Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence
Comparison of the accuracy of two on-line industrial veneer moisture content and density measurement systems
Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging
Estimating birch veneer (Betula pendula Roth) moisture content using infrared technology
Cross-linking of cellulose and poly(ethylene glycol) with citric acid
The toughness of hygrothermally modified wood: COST Action FP0904 2010-2014: Thermo-hydro-mechanical wood behavior and processing
Toward energy efficiency through an optimized use of wood: The development of natural hydrophobic coatings that retain moisture-buffering ability
The effect of material selection on life cycle energy balance: A case study on a hypothetical building model in Finland
Life cycle assessment of wood construction according to the normative standards
The Effect of Hydrothermal Treatment on Color Stability and Chemical Properties of Birch Veneer Surfaces
The chemical characteristics of squeezable sap from silver birch (Betula pendula) logs hydrothermally treated at 70 °C: the effect of treatment time on the concentration of water extracts
Chemical characteristics of squeezable sap of hydrothermally treated silver birch logs (Betula pendula): effect of treatment time and the quality of the soaking water in pilot scale experiment
Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile
Experimental validation of green wood peeling assisted by IR heating - some considerations of the analytical system design
Micromorphological studies of surface densified wood
Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C
The influence of felling season and log-soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer
Factors influencing properties of parallel laminated binderless bonded plywood manufactured from rotary cut birch (Betula pendula L.).
Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP)
A multidisciplinary approach to sustainable building material selection A case study in a Finnish context
Greenhouse gas emission from construction stage of wooden buildings
Comparison of life cycle assessment databases: A case study on building assessment
Soy protein-nanocellulose composite aerogels
Mechanical behavior, structure, and reinforcement processes of TEMPO-oxidized cellulose reinforced poly(lactic) acid
Mid-infrared absorption properties of green wood
The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies
Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments
Measuring the thermal properties of green wood by the transient plane source (TPS) technique
Water vapour sorption behaviour of thermally modified wood
Experiments on the effective compliance in the radial-tangential plane of Norway spruce
Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood
Analysing the density profile characteristics of surface densified solid wood using a computational approach
The effect of process parameters on the hardness of surface densified Scots pine solid wood
Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment
Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification
The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde bonded birch plywood
The fracture behavior of birch and spruce in the radial-tangential crack propagation direction at the scale of the growth ring
Colorimetric Behavior and Seasonal Characteristic of Xylem Sap Obtained by Mechanical Compression from Silver Birch (Betula pendula)
Micromechanics of TEMPO-oxidized fibrillated Cellulose Composites
Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose
Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)
Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy
The water vapour sorption properties of thermally modified and densified wood
Ultrastructural evaluation of compression wood-like properties of common juniper (Juniperus communis L)
Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure
XPS and the medium-dependent surface adaptation of cellulose in wood.
Thermodynamic characteristics of surface densified solid Scots pine wood
The Fracture Toughness and Properties of Thermally Modified Beech and Ash at Different Moisture Contents
A study by X-ray photoelectron spectroscopy (XPS) of the chemistry of the surface of Scots pine (Pinus sylvestris L.) modified by friction
Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models
Kink bands in bast fibres and their effects on mechanical properties
Surface modification of Scots pine: the effect of process parameters on the through thickness density profile
Potential error in density profile measurements for wood composites
Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite
The Combined Effects of Boron and oil Heat treatment on Beech and Scots Pine Wood Properties. Part 1: Boron Leaching, Thermogravimetric Analysis and Chemical Composition
The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance
Dimensional stability, UV resistance, and static mechanical properties of Scots pine chemically modified with alkylene expoxides
Properties and set-recovery of surface densified Norway spruce and European beech
Surface modification of wood using friction
The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Deformation and Fracture Behaviour of Flax Fibre Reinforced Thermosetting Polymer Matrix Composites
Structural Biocomposites from Flax Part II: The use of PEG and PVA as interfacial compatibilising agents
Relationship Between Sensory Quality and Volatile Compounds of Elderflower (Sambucus nigra L) Extracts
Determining the physical properties of flax fibre for industrial applications: the influence of agronomic practice
Structural Biocomposites from Flax Part I: Effect of Bio-technical Fibre Modification on Composite Properties
The Relationship Between Sensory Quality and Volatile Compounds in Raw Juice Processed from Elderberries (Sambucus nigra L.)
The fracture toughness of bast fibre reinforced polyester composites Part 1 Evaluation and analysis
Strain induced shifts in the Raman spectra of natural cellulose fibers
An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity
RTM hemp fibre-reinforced polyester composites
Defects in natural fibres: their origin, characteristics and implications for natural fibre reinforced composites
Natural Fibre Reinforced Composites Opportunities and Challenges
Biocomposites Technology, Environmental Credentials and Market Forces
Review: Current international research into cellulosic fibres and composites
Book section, Chapters in research booksPlywood and other veneer-based products
Hughes, Mark; Ansell, M.P.2015 in Woodhead Publishing Series in Composites Science and Engineering (Woodhead Publishing)ISBN: 978-1-78242-454-3Influence of surface densification of wood on its dynamic wettability and surface energy
Petric, Marko; Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2013 ISBN: 9781118472927Applications
Hughes, M.2004 Quantifying the Range of Properties in Natural Raw Material Origin Polymers and Fibres
Hughes, M.2004 Conference proceedingsLathe check formation and their impact on evaluations of veneer-based panel bond quality
Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Kers, Jaan2016 ISBN: 9783903039001The effect of wood anatomy and coatings on the moisture buffering performance of wooden surfaces
Vahtikari, Katja; Noponen, Tuula; Hughes, Mark2016 ISBN: 9783903039001SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION
Ruponen, Jussi; Rautkari, Lauri; Ohlmeyer, Martin; Hughes, Mark2015 ISBN: 978-80-7509-255-7Properties of high-temperature thermomechanical pulp (HT-TMP)
Solala, L.; Antikainen, T.; Reza, M.; Hughes, M.; Vuorinen, T.2014 Comparision of life cycle assessment databases for building assessment
Takano, Atsushi; Winter, Stefan; Hughes, Mark2014 The untapped potential of wood in developing energy-efficient spaces
Vahtikari, Katja; Cronhjort, Yrsa; Hughes, Mark; Linkosalmi, Lauri2014 Physical and mechanical properties of TEMPO-oxidized cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Hughes, Mark2010 MICRO-STRESS STATISTICS OF HONEYCOMB MATERIAL
Freund, Jouni; Tuhkuri, Jukka; Hughes, Mark2010 Origin of kink bands in bast fibres and their effects on the fibre strength
Hänninen, Tuomas; Alam, Md.; Michud, Anne; Hughes, Mark2010 A Fracture Mechanics Study of Thermally Modified Beech for Structural Applications
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose L.2010 Wood surface densification using different methods
Rautkari, Lauri; Kutnar, Andreja; Hughes, Mark; Kamke, Frederick2010 Properties and chemical changes of surface densified wood
Rautkari, Lauri; Hughes, Mark; Properzi, Milena; Pichelin, Frédéric2010 Fracture of Spruce and Birch in the Rt Crack Propagation Direction Based on Digital Image Correlation Analysis of Esem Images
Tukiainen, Pekka; Hughes, Mark2010 Evaluation of Parameters Influencing the VOC Emissions from Plywood
Ohlmeyer, Martin; Rohumaa, Anti; Antikainen, Toni; Hughes, Mark2009 Sustainable Composites from Wood Nature’s Biodegradable Polymer: Opportunities and Challenges
Hughes, Mark2008 An innovative thermo densification method for wooden surfaces
Rautkari, Lauri; Properzi, Milena; Pichelin, Frédéric; Hughes, Mark2008 Factors Influencing the Properties of Veneer-Based Products
Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin2008 Fracture of spruce and birch in the RT crack propagation direction
Tukiainen, Pekka; Hughes, Mark2008 Challenges in surface measurement: a comparison of simulated and real surface topography measurements in birch veneer
Honkanen, J.; Hughes, M.2007 Challenges in the Online Characterization of the Veneer Surface Topography
Honkanen, J.; Hughes, M.2007 Challenges in the characterization of the wood surface: A simulation approach.
Honkanen, J.; Hughes, M.2007 Raw Material and Process Factors Influencing Bond Strength Development in Veneer-Based Products
Rohumaa, Anti; Hughes, Mark; Ohlmeyer, Martin; Kallio, Timo2007 ISBN: 978-1-84220-097-1Process Factors Influencing Birch (Betula pendula Roth) Veneer Surface Properties and Bond Strength Development in Veneer-Based Products
Rohumaa, Anti; Antikainen, Toni; Hughes, Mark; Ohlmeyer, Martin2007 Non-refereed scientific articles
Book sectionComposites Historical, contemporary & future applications
Hänninen, Tuomas; Hughes, Mark2010 ISBN: 978-0-470-69508-1Unrefereed conference proceedingsThe behaviour of sorption hysteresis in the water vapour sorption isotherm of thermally modified wood
Hill, Callum AS; Ramsay, James; Rautkari, Lauri; Hughes, Mark; Laine, Kristiina2013 Set-recovery of densified and thermally modified wood under repeated soaking-drying-cycles
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Increasing solid wood density by compression
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Adhesion of polyurethane coating on surface densified Scots pine wood
Laine, Kristiina; Rautkari, Lauri; Kricej, Borut; Pavlic, Matjaz; Petric, Marko; Hughes, Mark; Kutnar, Andreja2013 Coated surface densified wood: water vapour absorption and desorption related dimensional changes
Petric, Marko; Hughes, Mark; Kricej, Borut; Kutnar, Andreja; Laine, Kristiina; Medved, Sergej; Pavlic, Matjaž; Rautkari, Lauri2013 Artificial accelerated ageing of surface densified spruce and pine wood
Petric, Marko; Kricej, Borut; Medved, Sergej; Pavlic, Matjaz; Laine, Kristiina; Hughes, Mark; Rautkari, Lauri; Kutnar, Andreja2013 Studies on heat-treated vibrational welded wood
Ruponen, Jussi; Rhême, Martin; Ferrari, Silvia; Rautkari, Lauri; Hughes, Mark2013 Internal vapour pressure in wood based panels during hot-pressing process
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2013 High-temperature thermomechanical pulp as a potential reinforcing element in composites
Solala, Iina; Antikainen, Toni; Hughes, Mark; Vuorinen, Tapani2013 in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY (JOHN WILEY & SONS)ISSN: 0065-7727Acetylated TEMPO oxidized cellulose as reinforcing agent of poly (lactic) acid (PLA)
Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka2012 ISBN: 978-88-88785-33-2Nanocellulose as a toughening agent
Bulota, Mindaugas; Hughes, Mark2012 ISBN: 978-951-38-7880-1ISSN: 2241-1211Dynamic wettability of surface densified wood in open system
Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2012 Removing set-recovery of surface densified wood by heat-treatment (preliminary results)
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 Brinell hardness of surface densified Scots pine - The effect of process parameters.
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-961-6144-35-3Influence of Vacuum Atmosphere Thermal Modification on the Bond Stability of Vibrational Welded Wood in Moist Conditions
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 Plywood manufacture without adhesives
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-609-02-0581-5Accumulation of chemical substances in the xylem sap and seasonal characteristics in silver birch (Betula pendula) obtained by mechanical compression.
Yamamoto, Akio; Kontturi, Eero; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani2012 Preparation, characterization and mechanical properties of acetylated microfbrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 An investigation into the mechanical behaviour of surface-modified fibrillated cellulose reinforced composites
Bulota, M.; Hänninen, T.; Jääskeläinen, A-S.; Kontturi, Eero; Hughes, M.2011 Wood surface densification by compression: Analysing the effect of process parameters
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Laflin, Nick2011 ISBN: 978-3-9523787-0-0Wood surface densification using different techniques
Rautkari, Lauri; Hughes, Mark2011 Peeling checks and their effect on phenol formaldehyde bonded birch plywood
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Bond properties of binderless bonded spruce plywood during immersion
Ruponen, Jussi; Rautkari, Lauri; Paajanen, Olli; Hughes, Mark2011 Studies on self-bonded plywood
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2011 A Preliminary study into the properties of laminated viscoelastic-thermal- compressed wood
Rautkari, Lauri; Hughes, Mark; Kamke, Frederick2010 Enhancing the Properties of Plywood Produced by Auto-adhesion
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2010 Measurement of Moisture Content and Density in Birch (Betual pendula) Veneer Using Microwave Technology
Antikainen, T.; Rohumaa, A.; Hughes, M.; Kairi, M.2007 Sustainable Composites
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; McCall, D.2005 Structural Biocomposites from Flax: Manipulation of Fibre Architecture and Interface Engineering
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; Carpenter, J.2005 Mechanical Properties and Deformation Behaviour of Flax Fibre Composites
Carpenter, J.; Hughes, M.; Hill, C.2003 Publications intended for professional communities
Article in professional conference proceedingsEffect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Published development or research reportThe Mesoscale Compressive Mechanical Properties of Norway Spruce
Estrada, Albert Hernandez; Hughes, Mark2014 Interfaces in wood-based materials
Rohumaa, Anti; Johansson, Leena-Sisko; Yamamoto, Akio; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Laine, Janne; Hughes, Mark2010 Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose2009 The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products
Rohumaa, Anti; Paajanen, Olli; Hughes, Mark; Kairi, Matti2006 Text book or professional handbook or guidebook or dictionaryFunctional Wood
Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja2016 in Aalto University publication series CROSSOVER (Aalto University)ISBN: 978-952-60-6872-5ISSN: 1799-4977FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris2012 ISBN: 978-2-9526276-1-0Tough cellulose reinforced composites
Bulota, Mindaugas; Hughes, Mark2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)ISSN: 1388-0209Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Fiber and material properties of Juniperus communis
Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727
Plywood and other veneer-based products
Influence of surface densification of wood on its dynamic wettability and surface energy
Applications
Quantifying the Range of Properties in Natural Raw Material Origin Polymers and Fibres
Lathe check formation and their impact on evaluations of veneer-based panel bond quality
The effect of wood anatomy and coatings on the moisture buffering performance of wooden surfaces
SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION
Properties of high-temperature thermomechanical pulp (HT-TMP)
Comparision of life cycle assessment databases for building assessment
The untapped potential of wood in developing energy-efficient spaces
Physical and mechanical properties of TEMPO-oxidized cellulose reinforced composites
MICRO-STRESS STATISTICS OF HONEYCOMB MATERIAL
Origin of kink bands in bast fibres and their effects on the fibre strength
A Fracture Mechanics Study of Thermally Modified Beech for Structural Applications
Wood surface densification using different methods
Properties and chemical changes of surface densified wood
Fracture of Spruce and Birch in the Rt Crack Propagation Direction Based on Digital Image Correlation Analysis of Esem Images
Evaluation of Parameters Influencing the VOC Emissions from Plywood
Sustainable Composites from Wood Nature’s Biodegradable Polymer: Opportunities and Challenges
An innovative thermo densification method for wooden surfaces
Factors Influencing the Properties of Veneer-Based Products
Fracture of spruce and birch in the RT crack propagation direction
Challenges in surface measurement: a comparison of simulated and real surface topography measurements in birch veneer
Challenges in the Online Characterization of the Veneer Surface Topography
Challenges in the characterization of the wood surface: A simulation approach.
Raw Material and Process Factors Influencing Bond Strength Development in Veneer-Based Products
Process Factors Influencing Birch (Betula pendula Roth) Veneer Surface Properties and Bond Strength Development in Veneer-Based Products
Non-refereed scientific articles
Book sectionComposites Historical, contemporary & future applications
Hänninen, Tuomas; Hughes, Mark2010 ISBN: 978-0-470-69508-1Unrefereed conference proceedingsThe behaviour of sorption hysteresis in the water vapour sorption isotherm of thermally modified wood
Hill, Callum AS; Ramsay, James; Rautkari, Lauri; Hughes, Mark; Laine, Kristiina2013 Set-recovery of densified and thermally modified wood under repeated soaking-drying-cycles
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Increasing solid wood density by compression
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2013 Adhesion of polyurethane coating on surface densified Scots pine wood
Laine, Kristiina; Rautkari, Lauri; Kricej, Borut; Pavlic, Matjaz; Petric, Marko; Hughes, Mark; Kutnar, Andreja2013 Coated surface densified wood: water vapour absorption and desorption related dimensional changes
Petric, Marko; Hughes, Mark; Kricej, Borut; Kutnar, Andreja; Laine, Kristiina; Medved, Sergej; Pavlic, Matjaž; Rautkari, Lauri2013 Artificial accelerated ageing of surface densified spruce and pine wood
Petric, Marko; Kricej, Borut; Medved, Sergej; Pavlic, Matjaz; Laine, Kristiina; Hughes, Mark; Rautkari, Lauri; Kutnar, Andreja2013 Studies on heat-treated vibrational welded wood
Ruponen, Jussi; Rhême, Martin; Ferrari, Silvia; Rautkari, Lauri; Hughes, Mark2013 Internal vapour pressure in wood based panels during hot-pressing process
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2013 High-temperature thermomechanical pulp as a potential reinforcing element in composites
Solala, Iina; Antikainen, Toni; Hughes, Mark; Vuorinen, Tapani2013 in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY (JOHN WILEY & SONS)ISSN: 0065-7727Acetylated TEMPO oxidized cellulose as reinforcing agent of poly (lactic) acid (PLA)
Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppälä, Jukka2012 ISBN: 978-88-88785-33-2Nanocellulose as a toughening agent
Bulota, Mindaugas; Hughes, Mark2012 ISBN: 978-951-38-7880-1ISSN: 2241-1211Dynamic wettability of surface densified wood in open system
Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark2012 Removing set-recovery of surface densified wood by heat-treatment (preliminary results)
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 Brinell hardness of surface densified Scots pine - The effect of process parameters.
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-961-6144-35-3Influence of Vacuum Atmosphere Thermal Modification on the Bond Stability of Vibrational Welded Wood in Moist Conditions
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 Plywood manufacture without adhesives
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2012 ISBN: 978-609-02-0581-5Accumulation of chemical substances in the xylem sap and seasonal characteristics in silver birch (Betula pendula) obtained by mechanical compression.
Yamamoto, Akio; Kontturi, Eero; Rohumaa, Anti; Hughes, Mark; Vuorinen, Tapani2012 Preparation, characterization and mechanical properties of acetylated microfbrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 An investigation into the mechanical behaviour of surface-modified fibrillated cellulose reinforced composites
Bulota, M.; Hänninen, T.; Jääskeläinen, A-S.; Kontturi, Eero; Hughes, M.2011 Wood surface densification by compression: Analysing the effect of process parameters
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Laflin, Nick2011 ISBN: 978-3-9523787-0-0Wood surface densification using different techniques
Rautkari, Lauri; Hughes, Mark2011 Peeling checks and their effect on phenol formaldehyde bonded birch plywood
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Bond properties of binderless bonded spruce plywood during immersion
Ruponen, Jussi; Rautkari, Lauri; Paajanen, Olli; Hughes, Mark2011 Studies on self-bonded plywood
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2011 A Preliminary study into the properties of laminated viscoelastic-thermal- compressed wood
Rautkari, Lauri; Hughes, Mark; Kamke, Frederick2010 Enhancing the Properties of Plywood Produced by Auto-adhesion
Ruponen, Jussi; Rautkari, Lauri; Hughes, Mark2010 Measurement of Moisture Content and Density in Birch (Betual pendula) Veneer Using Microwave Technology
Antikainen, T.; Rohumaa, A.; Hughes, M.; Kairi, M.2007 Sustainable Composites
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; McCall, D.2005 Structural Biocomposites from Flax: Manipulation of Fibre Architecture and Interface Engineering
Hughes, M.; Liu, Q.; Stuart, T.; Sharma, S.; Carpenter, J.2005 Mechanical Properties and Deformation Behaviour of Flax Fibre Composites
Carpenter, J.; Hughes, M.; Hill, C.2003 Publications intended for professional communities
Article in professional conference proceedingsEffect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Published development or research reportThe Mesoscale Compressive Mechanical Properties of Norway Spruce
Estrada, Albert Hernandez; Hughes, Mark2014 Interfaces in wood-based materials
Rohumaa, Anti; Johansson, Leena-Sisko; Yamamoto, Akio; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Laine, Janne; Hughes, Mark2010 Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose2009 The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products
Rohumaa, Anti; Paajanen, Olli; Hughes, Mark; Kairi, Matti2006 Text book or professional handbook or guidebook or dictionaryFunctional Wood
Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja2016 in Aalto University publication series CROSSOVER (Aalto University)ISBN: 978-952-60-6872-5ISSN: 1799-4977FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris2012 ISBN: 978-2-9526276-1-0Tough cellulose reinforced composites
Bulota, Mindaugas; Hughes, Mark2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)ISSN: 1388-0209Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Fiber and material properties of Juniperus communis
Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727
Composites Historical, contemporary & future applications
The behaviour of sorption hysteresis in the water vapour sorption isotherm of thermally modified wood
Set-recovery of densified and thermally modified wood under repeated soaking-drying-cycles
Increasing solid wood density by compression
Adhesion of polyurethane coating on surface densified Scots pine wood
Coated surface densified wood: water vapour absorption and desorption related dimensional changes
Artificial accelerated ageing of surface densified spruce and pine wood
Studies on heat-treated vibrational welded wood
Internal vapour pressure in wood based panels during hot-pressing process
High-temperature thermomechanical pulp as a potential reinforcing element in composites
Acetylated TEMPO oxidized cellulose as reinforcing agent of poly (lactic) acid (PLA)
Nanocellulose as a toughening agent
Dynamic wettability of surface densified wood in open system
Removing set-recovery of surface densified wood by heat-treatment (preliminary results)
Brinell hardness of surface densified Scots pine - The effect of process parameters.
Influence of Vacuum Atmosphere Thermal Modification on the Bond Stability of Vibrational Welded Wood in Moist Conditions
Plywood manufacture without adhesives
Accumulation of chemical substances in the xylem sap and seasonal characteristics in silver birch (Betula pendula) obtained by mechanical compression.
Preparation, characterization and mechanical properties of acetylated microfbrillated cellulose reinforced composites
An investigation into the mechanical behaviour of surface-modified fibrillated cellulose reinforced composites
Wood surface densification by compression: Analysing the effect of process parameters
Wood surface densification using different techniques
Peeling checks and their effect on phenol formaldehyde bonded birch plywood
Bond properties of binderless bonded spruce plywood during immersion
Studies on self-bonded plywood
A Preliminary study into the properties of laminated viscoelastic-thermal- compressed wood
Enhancing the Properties of Plywood Produced by Auto-adhesion
Measurement of Moisture Content and Density in Birch (Betual pendula) Veneer Using Microwave Technology
Sustainable Composites
Structural Biocomposites from Flax: Manipulation of Fibre Architecture and Interface Engineering
Mechanical Properties and Deformation Behaviour of Flax Fibre Composites
Publications intended for professional communities
Article in professional conference proceedingsEffect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin
Rohumaa, Anti; Logren, Janne; Hughes, Mark2011 Published development or research reportThe Mesoscale Compressive Mechanical Properties of Norway Spruce
Estrada, Albert Hernandez; Hughes, Mark2014 Interfaces in wood-based materials
Rohumaa, Anti; Johansson, Leena-Sisko; Yamamoto, Akio; Ganne-Chédeville, Christelle; Vuorinen, Tapani; Laine, Janne; Hughes, Mark2010 Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech
Majano-Majano, Almudena; Hughes, Mark; Fernández-Cabo, Jose2009 The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products
Rohumaa, Anti; Paajanen, Olli; Hughes, Mark; Kairi, Matti2006 Text book or professional handbook or guidebook or dictionaryFunctional Wood
Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja2016 in Aalto University publication series CROSSOVER (Aalto University)ISBN: 978-952-60-6872-5ISSN: 1799-4977FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris2012 ISBN: 978-2-9526276-1-0Tough cellulose reinforced composites
Bulota, Mindaugas; Hughes, Mark2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)ISSN: 1388-0209Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Fiber and material properties of Juniperus communis
Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727
Effect of peeling checks on bond quality between Birch (Betula pendula) Veneer and PF-resin
The Mesoscale Compressive Mechanical Properties of Norway Spruce
Interfaces in wood-based materials
Fracture Characteristics and Properties of Thermally Modified Timber made out of Beech
The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products
Text book or professional handbook or guidebook or dictionaryFunctional Wood
Cronhjort, Yrsa; Hughes, Mark; Paakkanen, Mikko; Sahi, Karola; Tukiainen, Pekka; Tulamo, Tomi-Samuel; Vahtikari, Katja2016 in Aalto University publication series CROSSOVER (Aalto University)ISBN: 978-952-60-6872-5ISSN: 1799-4977FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Loos, François; Verpoest, Ignaas; Müssig, Jörg; Hughes, Mark; Lomov, Stepan V.; Baley, Christophe; Davies, Peter; Baets, Joris; Ziegmann, Gerhard; Elsabbagh, Ahmed; Lilholt, Hans; Madsen, Bo; Gomina, Moussa; Le Duigou, Antoine; Van Acker, Joris2012 ISBN: 978-2-9526276-1-0Tough cellulose reinforced composites
Bulota, Mindaugas; Hughes, Mark2012 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Vuorinen, Tapani2012 in PHARMACEUTICAL BIOLOGY (INFORMA HEALTHCARE)ISSN: 1388-0209Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Bulota, Mindaugas; Hänninen, Tuomas; Kontturi, Eero; Jääskeläinen, Anna Stiina; Hughes, Mark2011 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Bulota, Mindaugas; Hughes, Mark; Hanninen, Tuomas; Jaaskelainen, Anna S.2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727Fiber and material properties of Juniperus communis
Hänninen, Tuomas; Tukiainen, Pekka; Leppänen, Kirsi; Serimaa, Ritva; Hughes, Mark; Vuorinen, Tapani2010 in Abstracts of papers of the American Chemical Society (AMER CHEMICAL SOC)ISSN: 0065-7727
Functional Wood
FLAX AND HEMP FIBRES: A NATURAL SOLUTION FOR THE COMPOSITE INDUSTRY
Tough cellulose reinforced composites
Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control
Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites
Influence of preparation method on the mechanical properties of natural fibre reinforced composites
Fiber and material properties of Juniperus communis
Read about executive education
Other experts
Jayaram Uparna
Jayaram S. Uparna is an Assistant Professor in Organizational Behavior & Human Resources Management at Indian Institute of Management Bangalore. His research is about entrepreneurship, emerging markets, network theory and big data. He studies small-scale entrepreneurs across the world, and ho...
Kerrin Myres
Profile Dr Kerrin Myres is a Professional Associate and Research Associate at the Gordon Institute of Business Science. She is a consultant specialising in the design, implementation and evaluation of programmes designed to achieve sustainable behavioural change at the organisational, team ...
Michael Fenn
Biography Michael works as a consultant and board director. He has extensive experience in leadership positions at the municipal and provincial levels of government, as well as in healthcare. Michael’s career experience includes seven years as an Ontario Deputy Minister and 11 years as chief muni...
Looking for an expert?
Contact us and we'll find the best option for you.