Martti Mäntylä
Professor, Information Technology at Aalto University School of Business
Biography
Aalto University School of Business
My activities are focused on digitalization in industry and society in general, in particular so-called Industrial Internet. A key activity is to lead the Digital Disruption of Industry consortium funded by the Strategic Research Council of the Academy of Finland; see http://ddi.aalto.fi. I am also actively engaged with the Aalto Industrial Internet Campus strategic initiative; see http://aiic.aalto.fi for more information.
CURRICULUM VITAE
Professor Dr. Martti Mäntylä is presently Professor of Information Technology with dual appointment to the Department of Computer Science in the School of Science and the Department of Mechanical Engineering in the School of Engineering. His focus area is Enterprise Systems, especially the Industrial Internet and more widely the digitalization of industry in general.
Mäntylä obtained his Dr.Sc. in computer science from the Helsinki University of Technology in 1983. In 1987, he was appointed full professor at the Department of Computer Science and Engineering at the Helsinki University of Technology (now Aalto University). From 1999 to 2008, he was the founding Director of the Helsinki Institute for Information Technology (HIIT), a joint research centre of Helsinki University of Technology and University of Helsinki. From 2009 until end of 2013 he was the Chief Strategy Officer of EIT ICT Labs, the Knowledge and Innovation Community (KIC) in information society of the European Institute for Innovation and Technology (EIT).
Mäntylä was a post-doctoral visitor in Stanford University in 1983-84, a visiting scientist at IBM Research Division in 1989 and a visiting professor at Fraunhofer Institute for Computer Graphics in 1996-97. His other research interests include product models for computer-aided design and manufacturing and user-centric and data intensive methods for digital service innovation and design, especially large-scale field experiments.
Peer-reviewed scientific articles
Journal article-refereed, Original researchAssessing Legal Challenges on the Mobile Internet
Pitkänen, Olli; Mäntylä, Martti; Välimäki, Mikko; Kemppinen, Jukka2003 in INTERNATIONAL JOURNAL OF ELECTRONIC COMMERCE (M.E. Sharpe Inc.)Logistics from IMS towards virtual factory
Cser, L.; Cselenyi, J.; Geiger, M.; Mäntylä, M.; Korhonen, A.S.2000 in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Elsevier BV)Challenges in Feature-Based Manufacturing Research
Mäntylä, M.; Nau, D.; Shah, J.1996 in COMMUNICATIONS OF THE ACM (Association for Computing Machinery (ACM))Functional Understanding of Assembly Modelling
Gui, Jin-Kang; Mäntylä, Martti1994 in COMPUTER-AIDED DESIGN (Elsevier Limited)Automatic Process Plan Generation in an Operative Process Planning System
Opas, Jussi; Kanerva, J.; Mäntylä, M.1994 in International Journal of Production Research (Taylor and Francis Ltd.)Introducing Blending Operations in Feature Models
Laakko, T.; Mäntylä, M.1993 in COMPUTER GRAPHICS FORUM (Wiley-Blackwell)Feature Modelling by Incremental Feature Recognition
Laakko, T.; Mäntylä, M.1993 in COMPUTER-AIDED DESIGN (Elsevier Limited)Representation of Process Planning Knowledge for Part Families
Mäntylä, M.1993 in Annals of CIRP (Elsevier Limited)A modeling system for top-down design of assembled products
Mäntylä, Martti1990 in IBM JOURNAL OF RESEARCH AND DEVELOPMENT (IBM Corporation)ISSN: 0018-8646Boolean set operations of 2-manifolds through vertex neighborhood classification
Mäntylä, Martti1986 in ACM Transactions on Graphics (Association for Computing Machinery (ACM))ISSN: 0730-0301Space sweep solves intersection of convex polyhedra
Hertel, Stefan; Mäntylä, Martti; Mehlhorn, Kurt; Nievergelt, Jurg1984 in ACTA INFORMATICA (Springer New York)ISSN: 0001-5903Book section, Chapters in research booksImproving product development: Towards a framework for integrating artefact and process models
Ranta, M.; Mäntylä, M.; Smeds, R.; Haho, P.; Alvesalo, J.1999 Introduction to Feature Based Manufacturing
Mäntylä, Martti; Shah, J.; Nau, D.1994 Automatic Part Program Generation
Opas, J.; Mäntylä, M.1994 The EXTDesign Feature Modeler
Laakko, T.; Mäntylä, M.1993 Feature-based Part Programming
Opas, J.; Mäntylä, M.1993 Conference proceedingsSizzleLab: Building an Experimentation Platform for Mobile Social Interaction
Mäntylä, Martti; Hämäläinen, Matti; Karhu, Kimmo; Lampinen, Airi; Lehväslaiho, Kasimir; Nuutila, Esko; Oulasvirta, Antti; Pitkänen, Olli; Sarvas, Risto; Suhonen, Emmi; Turunen, Jani; Törmä, Seppo; Virolainen, Antti2009 Human-Centric Design of Future Print Media
Sarvas, Risto; Mäntylä, Martti; Turpeinen, Marko2007 InfoRadar: Group and public messaging in mobile context
Rantanen, Matti; Oulasvirta, Antti; Blom, Jan; Tiitta, Sauli; Mäntylä, Martti2004 Adaptive Strategies for Probabilistic Roadmap Construction
Isto, Pekka; Tuominen, Juha; Mäntylä, Martti2003 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti; Tuominen, Juha2003 Assessing Legal Challenges on the Mobile Web
Pitkänen, Olli; Välimäki, Mikko; Kemppinen, Jukka; Mäntylä, Martti2002 Is User Involvement Harmful or Useful in the Early Stages of Product Development?
Kujala, S.; Mäntylä, M.2000 Studying Users for Developing Usable and Useful Products.
Kujala, S.; Mäntylä, M.2000 How Effective Are User Studies?
Kujala, S.; Mäntylä, M.2000 Logistics from IMS towards Virtual Factory
Cser, L.; Cselényi, J.; Geiger, M.; Mäntylä, Martti; Korhonen, A.S.1998 Engineering Process Ontologies for Communication, Co-operation, and Co-ordination in a Virtual Enterprise
Mäntylä, M.; Ranta, M.1998 Life-cycle modelling: research challenges and directions
Mäntylä, Martti; Ranta, M.1998 Capturing and deploying design decisions
Lahti, A.; Mäntylä, Martti; Ranta, M.1997 Virtual Engineering
Mäntylä, M.1997 Virtual Engineering
Mäntylä, Martti; Ranta, M.; Kress, H.1997 Extracting reusable product data
Mäntylä, M.1997 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Knowledge-Intensive CAD: Introduction and Research Agenda
Mäntylä, M.1996 Utilisation of Product Models in Production Preparation
Mäntylä, M.1995 Product Modelling for KIC: Towards a Research Agenda
Mäntylä, M.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Mäntylä, M.; Inui, M.; Kimura, F.1995 New Concepts for Complete Product Assembly Modeling
Gui, J.; Mäntylä, M.1993 A Feature Definition Language for Bridging Solids and Features
Laakko, T.; Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Advanced Topics of Product Modelling
Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Cut and Paste Based Modeling with Boundary Features
Ranta, Mervi; Inui, Masatomo; Kimura, Fumihiko; Mäntylä, M.1993 Scientific books (monographs)
BookParametric and Feature-Based CAD/CAM: Concepts, Techniques, and Applications
Mäntylä, M.; Shah, J.1995 Advances in Feature-Based Manufacturing
Shah, Jami; Mäntylä, M.; Nau, Dana1994 An Introduction to Solid Modeling
Mäntylä, Martti1988 ISBN: 0-88175-108-1Book (editor)Knowledge Intensive Computer Aided Design
Finger, S.; Tomiyama, T.; Mäntylä, M.1999 Preprints of The Third IFIP WG 5.2 Workshop on Knowledge-Intensive CAD
Finger, S.; Tomiyama, T.; Mäntylä, M.1998 Knowledge Intensive CAD, Volume 2.Proceedings of the Second IFIP WG 5.2 Workshop on Knowledge-Intensive CAD, IFIP Proceedings
Finger, S.; Mäntylä, Martti; Tomiyama, T.1997 Knowledge Intensive CAD - 2, Reprints of the Second IFIP WG 5.2 Workshop
Finger, S.; Mäntylä, Martti; Tomiyama, T.1996 Proceedings of the First WG 5.2 Workshop on Knowledge-Intensive CAD
Tomiyama, T.; Mäntylä, Martti; Finger, S.1996 Publications intended for professional communities
Article in professional journalArkipäivän läsnä-älyä
Kankainen, Anu; Oulasvirta, Antti; Rantanen, Matti; Tiitta, Sauli; Kankainen, Tomi; Mäntylä, Martti2003 in Prosessori (Elektroniikan suunnittelu -erikoisjulkaisu) (Chapman & Hall)Published development or research reportOnko Suomi jäämässä alustatalouden junasta?
Ailisto, Heikki; Collin, Jari; Juhanko, Jari; Mäntylä, Martti; Ruutu, Sampsa; Seppälä, Timo2016 in Valtioneuvoston selvitys- ja tutkimustoiminnan julkaisusarja (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-253-1ISSN: 2342-6799Technology disruptions as enablers of organizational and social innovation in digitalized environment
Koski, Heli; Melkas, Helinä; Mäntylä, Martti; Pieters, Roel; Svento, Rauli; Särkikoski, Tuomo; Talja, Heli; Hyyppä, Juha; Kaartinen, Harri; Hyyppä, Hannu; Matikainen, Leena2016 Three Narratives on Digitalization
Mäntylä, Martti2016 Finland - The Silicon Valley of Industrial Internet
Ailisto, Heikki; Mäntylä, Martti; Seppälä, Timo2015 in Publications of the Government’s analysis, assessment and research activities (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-189-3ISSN: 2342-6799Mobile Social Media for Groups
Lampinen, Airi; Lehtinen, Vilma; Huotari, Kai; Luusua, Vesa; Mäntylä, Martti; Sarvas, Risto; Seppälä, Lassi; Turunen, Jani2009 HIIT Annual Report 2006
Saarinen, Päivi; Mäntylä, Martti; Ukkonen, Esko2007 Towards Ubiquitous Network Society
Martikainen, Petri; Karila, Arto; Kemppinen, Jukka; Kontiainen, Mikko; Kurvinen, Esko; Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli; Raento, Mika; Salovaara, Antti; Sarkio, Katri; Sarvas, Risto; Turpeinen, Marko; Virtanen, Perttu2006 Is Your Neighbor a Traitor?Distributed Reputation Management in Member-Initiated Virtual Communities
Sarkio, Katri; Mäntylä, Martti2006 On Addressing the Run-Cost Variance in Rondomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 Assessing Legal Challenges on the Mobile Internet
Pitkänen, Olli; Mäntylä, Martti; Välimäki, Mikko; Kemppinen, Jukka2002 Teollisuuden Internet-sovellutukset
Heiskanen, L.; Mäntylä, M.1999 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Integration of Constraint Propagation and Variational Geometry in a Feature-Based Modelling System
Laakko, T.; Lahti, A.; Mäntylä, M.1995 Challenges in Feature-Based Manufacturing Research
Mäntylä, M.; Nau, D.; Shah, J.1995 Knowledge Intensive CAD-1
Mäntylä, M.; Tomiyama, T.; Finger, S.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Inui, M.; Kimura, F.; Mäntylä, M.1995 Assembly Modeling on the Basis of a Mechanical Design Prototype
Gui, J.; Mäntylä, M.1993 Delta Report and Handbook
Gui, J.; Mäntylä, M.1993 A Lisp Interface to Geometric Modelling Operations
Laakko, T.; Mäntylä, M.1993 EXTDesign Version 1.0 Reference Manual
Laakko, T.; Mäntylä, M.1993 Introducing Blending Operations in Feature Models
Laakko, T.; Mäntylä, M.1993 Naive Physics Simulator
Lampio, Pekka; Fraunberg, M.; Räty, Timo; Salonen, Pasi; Tuomas, Jukka; Mäntylä, M.1993 Representation of Process Planning Knowledge for Part Families
Mäntylä, M.1993 The MCOES Process Planning System
Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Problems in Integrating a Feature-Based Process Planner With a NC Programming System
Nieminen, Jukka; Tuomi, J.; Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Automatic Part Program Generation
Opas, J.; Mäntylä, M.1993 Main Joint Demonstration of GNOSIS Technical Work Package 1
Ranta, M.; Mäntylä, M.1993 Publications intended for the general public
Popular article, newspaper articleVain oikein ymmärretty Living Lab tuottaa tulosta
Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli2008 in Tekniikan näköalat (VALTIONEUVOSTON KANSLIA)
Assessing Legal Challenges on the Mobile Internet
Logistics from IMS towards virtual factory
Challenges in Feature-Based Manufacturing Research
Functional Understanding of Assembly Modelling
Automatic Process Plan Generation in an Operative Process Planning System
Introducing Blending Operations in Feature Models
Feature Modelling by Incremental Feature Recognition
Representation of Process Planning Knowledge for Part Families
A modeling system for top-down design of assembled products
Boolean set operations of 2-manifolds through vertex neighborhood classification
Space sweep solves intersection of convex polyhedra
Improving product development: Towards a framework for integrating artefact and process models
Introduction to Feature Based Manufacturing
Automatic Part Program Generation
The EXTDesign Feature Modeler
Feature-based Part Programming
Conference proceedingsSizzleLab: Building an Experimentation Platform for Mobile Social Interaction
Mäntylä, Martti; Hämäläinen, Matti; Karhu, Kimmo; Lampinen, Airi; Lehväslaiho, Kasimir; Nuutila, Esko; Oulasvirta, Antti; Pitkänen, Olli; Sarvas, Risto; Suhonen, Emmi; Turunen, Jani; Törmä, Seppo; Virolainen, Antti2009 Human-Centric Design of Future Print Media
Sarvas, Risto; Mäntylä, Martti; Turpeinen, Marko2007 InfoRadar: Group and public messaging in mobile context
Rantanen, Matti; Oulasvirta, Antti; Blom, Jan; Tiitta, Sauli; Mäntylä, Martti2004 Adaptive Strategies for Probabilistic Roadmap Construction
Isto, Pekka; Tuominen, Juha; Mäntylä, Martti2003 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti; Tuominen, Juha2003 Assessing Legal Challenges on the Mobile Web
Pitkänen, Olli; Välimäki, Mikko; Kemppinen, Jukka; Mäntylä, Martti2002 Is User Involvement Harmful or Useful in the Early Stages of Product Development?
Kujala, S.; Mäntylä, M.2000 Studying Users for Developing Usable and Useful Products.
Kujala, S.; Mäntylä, M.2000 How Effective Are User Studies?
Kujala, S.; Mäntylä, M.2000 Logistics from IMS towards Virtual Factory
Cser, L.; Cselényi, J.; Geiger, M.; Mäntylä, Martti; Korhonen, A.S.1998 Engineering Process Ontologies for Communication, Co-operation, and Co-ordination in a Virtual Enterprise
Mäntylä, M.; Ranta, M.1998 Life-cycle modelling: research challenges and directions
Mäntylä, Martti; Ranta, M.1998 Capturing and deploying design decisions
Lahti, A.; Mäntylä, Martti; Ranta, M.1997 Virtual Engineering
Mäntylä, M.1997 Virtual Engineering
Mäntylä, Martti; Ranta, M.; Kress, H.1997 Extracting reusable product data
Mäntylä, M.1997 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Knowledge-Intensive CAD: Introduction and Research Agenda
Mäntylä, M.1996 Utilisation of Product Models in Production Preparation
Mäntylä, M.1995 Product Modelling for KIC: Towards a Research Agenda
Mäntylä, M.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Mäntylä, M.; Inui, M.; Kimura, F.1995 New Concepts for Complete Product Assembly Modeling
Gui, J.; Mäntylä, M.1993 A Feature Definition Language for Bridging Solids and Features
Laakko, T.; Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Advanced Topics of Product Modelling
Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Cut and Paste Based Modeling with Boundary Features
Ranta, Mervi; Inui, Masatomo; Kimura, Fumihiko; Mäntylä, M.1993 Scientific books (monographs)
BookParametric and Feature-Based CAD/CAM: Concepts, Techniques, and Applications
Mäntylä, M.; Shah, J.1995 Advances in Feature-Based Manufacturing
Shah, Jami; Mäntylä, M.; Nau, Dana1994 An Introduction to Solid Modeling
Mäntylä, Martti1988 ISBN: 0-88175-108-1Book (editor)Knowledge Intensive Computer Aided Design
Finger, S.; Tomiyama, T.; Mäntylä, M.1999 Preprints of The Third IFIP WG 5.2 Workshop on Knowledge-Intensive CAD
Finger, S.; Tomiyama, T.; Mäntylä, M.1998 Knowledge Intensive CAD, Volume 2.Proceedings of the Second IFIP WG 5.2 Workshop on Knowledge-Intensive CAD, IFIP Proceedings
Finger, S.; Mäntylä, Martti; Tomiyama, T.1997 Knowledge Intensive CAD - 2, Reprints of the Second IFIP WG 5.2 Workshop
Finger, S.; Mäntylä, Martti; Tomiyama, T.1996 Proceedings of the First WG 5.2 Workshop on Knowledge-Intensive CAD
Tomiyama, T.; Mäntylä, Martti; Finger, S.1996 Publications intended for professional communities
Article in professional journalArkipäivän läsnä-älyä
Kankainen, Anu; Oulasvirta, Antti; Rantanen, Matti; Tiitta, Sauli; Kankainen, Tomi; Mäntylä, Martti2003 in Prosessori (Elektroniikan suunnittelu -erikoisjulkaisu) (Chapman & Hall)Published development or research reportOnko Suomi jäämässä alustatalouden junasta?
Ailisto, Heikki; Collin, Jari; Juhanko, Jari; Mäntylä, Martti; Ruutu, Sampsa; Seppälä, Timo2016 in Valtioneuvoston selvitys- ja tutkimustoiminnan julkaisusarja (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-253-1ISSN: 2342-6799Technology disruptions as enablers of organizational and social innovation in digitalized environment
Koski, Heli; Melkas, Helinä; Mäntylä, Martti; Pieters, Roel; Svento, Rauli; Särkikoski, Tuomo; Talja, Heli; Hyyppä, Juha; Kaartinen, Harri; Hyyppä, Hannu; Matikainen, Leena2016 Three Narratives on Digitalization
Mäntylä, Martti2016 Finland - The Silicon Valley of Industrial Internet
Ailisto, Heikki; Mäntylä, Martti; Seppälä, Timo2015 in Publications of the Government’s analysis, assessment and research activities (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-189-3ISSN: 2342-6799Mobile Social Media for Groups
Lampinen, Airi; Lehtinen, Vilma; Huotari, Kai; Luusua, Vesa; Mäntylä, Martti; Sarvas, Risto; Seppälä, Lassi; Turunen, Jani2009 HIIT Annual Report 2006
Saarinen, Päivi; Mäntylä, Martti; Ukkonen, Esko2007 Towards Ubiquitous Network Society
Martikainen, Petri; Karila, Arto; Kemppinen, Jukka; Kontiainen, Mikko; Kurvinen, Esko; Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli; Raento, Mika; Salovaara, Antti; Sarkio, Katri; Sarvas, Risto; Turpeinen, Marko; Virtanen, Perttu2006 Is Your Neighbor a Traitor?Distributed Reputation Management in Member-Initiated Virtual Communities
Sarkio, Katri; Mäntylä, Martti2006 On Addressing the Run-Cost Variance in Rondomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 Assessing Legal Challenges on the Mobile Internet
Pitkänen, Olli; Mäntylä, Martti; Välimäki, Mikko; Kemppinen, Jukka2002 Teollisuuden Internet-sovellutukset
Heiskanen, L.; Mäntylä, M.1999 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Integration of Constraint Propagation and Variational Geometry in a Feature-Based Modelling System
Laakko, T.; Lahti, A.; Mäntylä, M.1995 Challenges in Feature-Based Manufacturing Research
Mäntylä, M.; Nau, D.; Shah, J.1995 Knowledge Intensive CAD-1
Mäntylä, M.; Tomiyama, T.; Finger, S.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Inui, M.; Kimura, F.; Mäntylä, M.1995 Assembly Modeling on the Basis of a Mechanical Design Prototype
Gui, J.; Mäntylä, M.1993 Delta Report and Handbook
Gui, J.; Mäntylä, M.1993 A Lisp Interface to Geometric Modelling Operations
Laakko, T.; Mäntylä, M.1993 EXTDesign Version 1.0 Reference Manual
Laakko, T.; Mäntylä, M.1993 Introducing Blending Operations in Feature Models
Laakko, T.; Mäntylä, M.1993 Naive Physics Simulator
Lampio, Pekka; Fraunberg, M.; Räty, Timo; Salonen, Pasi; Tuomas, Jukka; Mäntylä, M.1993 Representation of Process Planning Knowledge for Part Families
Mäntylä, M.1993 The MCOES Process Planning System
Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Problems in Integrating a Feature-Based Process Planner With a NC Programming System
Nieminen, Jukka; Tuomi, J.; Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Automatic Part Program Generation
Opas, J.; Mäntylä, M.1993 Main Joint Demonstration of GNOSIS Technical Work Package 1
Ranta, M.; Mäntylä, M.1993 Publications intended for the general public
Popular article, newspaper articleVain oikein ymmärretty Living Lab tuottaa tulosta
Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli2008 in Tekniikan näköalat (VALTIONEUVOSTON KANSLIA)
SizzleLab: Building an Experimentation Platform for Mobile Social Interaction
Human-Centric Design of Future Print Media
InfoRadar: Group and public messaging in mobile context
Adaptive Strategies for Probabilistic Roadmap Construction
On Addressing the Run-Cost Variance in Randomized Motion Planners
Assessing Legal Challenges on the Mobile Web
Is User Involvement Harmful or Useful in the Early Stages of Product Development?
Studying Users for Developing Usable and Useful Products.
How Effective Are User Studies?
Logistics from IMS towards Virtual Factory
Engineering Process Ontologies for Communication, Co-operation, and Co-ordination in a Virtual Enterprise
Life-cycle modelling: research challenges and directions
Capturing and deploying design decisions
Virtual Engineering
Virtual Engineering
Extracting reusable product data
Incremental Constraint Modelling in a Feature Modelling System
Knowledge-Intensive CAD: Introduction and Research Agenda
Utilisation of Product Models in Production Preparation
Product Modelling for KIC: Towards a Research Agenda
Cutting and Pasting Constrained Boundary Features
New Concepts for Complete Product Assembly Modeling
A Feature Definition Language for Bridging Solids and Features
Towards Open Architecture Concurrent Engineering Frameworks
Advanced Topics of Product Modelling
Parametric Fixture Layout Models for Operative Process Planning
Cut and Paste Based Modeling with Boundary Features
Parametric and Feature-Based CAD/CAM: Concepts, Techniques, and Applications
Advances in Feature-Based Manufacturing
An Introduction to Solid Modeling
Book (editor)Knowledge Intensive Computer Aided Design
Finger, S.; Tomiyama, T.; Mäntylä, M.1999 Preprints of The Third IFIP WG 5.2 Workshop on Knowledge-Intensive CAD
Finger, S.; Tomiyama, T.; Mäntylä, M.1998 Knowledge Intensive CAD, Volume 2.Proceedings of the Second IFIP WG 5.2 Workshop on Knowledge-Intensive CAD, IFIP Proceedings
Finger, S.; Mäntylä, Martti; Tomiyama, T.1997 Knowledge Intensive CAD - 2, Reprints of the Second IFIP WG 5.2 Workshop
Finger, S.; Mäntylä, Martti; Tomiyama, T.1996 Proceedings of the First WG 5.2 Workshop on Knowledge-Intensive CAD
Tomiyama, T.; Mäntylä, Martti; Finger, S.1996 Publications intended for professional communities
Article in professional journalArkipäivän läsnä-älyä
Kankainen, Anu; Oulasvirta, Antti; Rantanen, Matti; Tiitta, Sauli; Kankainen, Tomi; Mäntylä, Martti2003 in Prosessori (Elektroniikan suunnittelu -erikoisjulkaisu) (Chapman & Hall)Published development or research reportOnko Suomi jäämässä alustatalouden junasta?
Ailisto, Heikki; Collin, Jari; Juhanko, Jari; Mäntylä, Martti; Ruutu, Sampsa; Seppälä, Timo2016 in Valtioneuvoston selvitys- ja tutkimustoiminnan julkaisusarja (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-253-1ISSN: 2342-6799Technology disruptions as enablers of organizational and social innovation in digitalized environment
Koski, Heli; Melkas, Helinä; Mäntylä, Martti; Pieters, Roel; Svento, Rauli; Särkikoski, Tuomo; Talja, Heli; Hyyppä, Juha; Kaartinen, Harri; Hyyppä, Hannu; Matikainen, Leena2016 Three Narratives on Digitalization
Mäntylä, Martti2016 Finland - The Silicon Valley of Industrial Internet
Ailisto, Heikki; Mäntylä, Martti; Seppälä, Timo2015 in Publications of the Government’s analysis, assessment and research activities (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-189-3ISSN: 2342-6799Mobile Social Media for Groups
Lampinen, Airi; Lehtinen, Vilma; Huotari, Kai; Luusua, Vesa; Mäntylä, Martti; Sarvas, Risto; Seppälä, Lassi; Turunen, Jani2009 HIIT Annual Report 2006
Saarinen, Päivi; Mäntylä, Martti; Ukkonen, Esko2007 Towards Ubiquitous Network Society
Martikainen, Petri; Karila, Arto; Kemppinen, Jukka; Kontiainen, Mikko; Kurvinen, Esko; Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli; Raento, Mika; Salovaara, Antti; Sarkio, Katri; Sarvas, Risto; Turpeinen, Marko; Virtanen, Perttu2006 Is Your Neighbor a Traitor?Distributed Reputation Management in Member-Initiated Virtual Communities
Sarkio, Katri; Mäntylä, Martti2006 On Addressing the Run-Cost Variance in Rondomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 Assessing Legal Challenges on the Mobile Internet
Pitkänen, Olli; Mäntylä, Martti; Välimäki, Mikko; Kemppinen, Jukka2002 Teollisuuden Internet-sovellutukset
Heiskanen, L.; Mäntylä, M.1999 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Integration of Constraint Propagation and Variational Geometry in a Feature-Based Modelling System
Laakko, T.; Lahti, A.; Mäntylä, M.1995 Challenges in Feature-Based Manufacturing Research
Mäntylä, M.; Nau, D.; Shah, J.1995 Knowledge Intensive CAD-1
Mäntylä, M.; Tomiyama, T.; Finger, S.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Inui, M.; Kimura, F.; Mäntylä, M.1995 Assembly Modeling on the Basis of a Mechanical Design Prototype
Gui, J.; Mäntylä, M.1993 Delta Report and Handbook
Gui, J.; Mäntylä, M.1993 A Lisp Interface to Geometric Modelling Operations
Laakko, T.; Mäntylä, M.1993 EXTDesign Version 1.0 Reference Manual
Laakko, T.; Mäntylä, M.1993 Introducing Blending Operations in Feature Models
Laakko, T.; Mäntylä, M.1993 Naive Physics Simulator
Lampio, Pekka; Fraunberg, M.; Räty, Timo; Salonen, Pasi; Tuomas, Jukka; Mäntylä, M.1993 Representation of Process Planning Knowledge for Part Families
Mäntylä, M.1993 The MCOES Process Planning System
Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Problems in Integrating a Feature-Based Process Planner With a NC Programming System
Nieminen, Jukka; Tuomi, J.; Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Automatic Part Program Generation
Opas, J.; Mäntylä, M.1993 Main Joint Demonstration of GNOSIS Technical Work Package 1
Ranta, M.; Mäntylä, M.1993 Publications intended for the general public
Popular article, newspaper articleVain oikein ymmärretty Living Lab tuottaa tulosta
Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli2008 in Tekniikan näköalat (VALTIONEUVOSTON KANSLIA)
Knowledge Intensive Computer Aided Design
Preprints of The Third IFIP WG 5.2 Workshop on Knowledge-Intensive CAD
Knowledge Intensive CAD, Volume 2.Proceedings of the Second IFIP WG 5.2 Workshop on Knowledge-Intensive CAD, IFIP Proceedings
Knowledge Intensive CAD - 2, Reprints of the Second IFIP WG 5.2 Workshop
Proceedings of the First WG 5.2 Workshop on Knowledge-Intensive CAD
Arkipäivän läsnä-älyä
Published development or research reportOnko Suomi jäämässä alustatalouden junasta?
Ailisto, Heikki; Collin, Jari; Juhanko, Jari; Mäntylä, Martti; Ruutu, Sampsa; Seppälä, Timo2016 in Valtioneuvoston selvitys- ja tutkimustoiminnan julkaisusarja (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-253-1ISSN: 2342-6799Technology disruptions as enablers of organizational and social innovation in digitalized environment
Koski, Heli; Melkas, Helinä; Mäntylä, Martti; Pieters, Roel; Svento, Rauli; Särkikoski, Tuomo; Talja, Heli; Hyyppä, Juha; Kaartinen, Harri; Hyyppä, Hannu; Matikainen, Leena2016 Three Narratives on Digitalization
Mäntylä, Martti2016 Finland - The Silicon Valley of Industrial Internet
Ailisto, Heikki; Mäntylä, Martti; Seppälä, Timo2015 in Publications of the Government’s analysis, assessment and research activities (VALTIONEUVOSTON KANSLIA)ISBN: 978-952-287-189-3ISSN: 2342-6799Mobile Social Media for Groups
Lampinen, Airi; Lehtinen, Vilma; Huotari, Kai; Luusua, Vesa; Mäntylä, Martti; Sarvas, Risto; Seppälä, Lassi; Turunen, Jani2009 HIIT Annual Report 2006
Saarinen, Päivi; Mäntylä, Martti; Ukkonen, Esko2007 Towards Ubiquitous Network Society
Martikainen, Petri; Karila, Arto; Kemppinen, Jukka; Kontiainen, Mikko; Kurvinen, Esko; Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli; Raento, Mika; Salovaara, Antti; Sarkio, Katri; Sarvas, Risto; Turpeinen, Marko; Virtanen, Perttu2006 Is Your Neighbor a Traitor?Distributed Reputation Management in Member-Initiated Virtual Communities
Sarkio, Katri; Mäntylä, Martti2006 On Addressing the Run-Cost Variance in Rondomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 On Addressing the Run-Cost Variance in Randomized Motion Planners
Isto, Pekka; Mäntylä, Martti2002 Assessing Legal Challenges on the Mobile Internet
Pitkänen, Olli; Mäntylä, Martti; Välimäki, Mikko; Kemppinen, Jukka2002 Teollisuuden Internet-sovellutukset
Heiskanen, L.; Mäntylä, M.1999 Incremental Constraint Modelling in a Feature Modelling System
Laakko, T.; Mäntylä, M.1996 Integration of Constraint Propagation and Variational Geometry in a Feature-Based Modelling System
Laakko, T.; Lahti, A.; Mäntylä, M.1995 Challenges in Feature-Based Manufacturing Research
Mäntylä, M.; Nau, D.; Shah, J.1995 Knowledge Intensive CAD-1
Mäntylä, M.; Tomiyama, T.; Finger, S.1995 Cutting and Pasting Constrained Boundary Features
Ranta, M.; Inui, M.; Kimura, F.; Mäntylä, M.1995 Assembly Modeling on the Basis of a Mechanical Design Prototype
Gui, J.; Mäntylä, M.1993 Delta Report and Handbook
Gui, J.; Mäntylä, M.1993 A Lisp Interface to Geometric Modelling Operations
Laakko, T.; Mäntylä, M.1993 EXTDesign Version 1.0 Reference Manual
Laakko, T.; Mäntylä, M.1993 Introducing Blending Operations in Feature Models
Laakko, T.; Mäntylä, M.1993 Naive Physics Simulator
Lampio, Pekka; Fraunberg, M.; Räty, Timo; Salonen, Pasi; Tuomas, Jukka; Mäntylä, M.1993 Representation of Process Planning Knowledge for Part Families
Mäntylä, M.1993 The MCOES Process Planning System
Mäntylä, M.1993 Towards Open Architecture Concurrent Engineering Frameworks
Mäntylä, M.1993 Problems in Integrating a Feature-Based Process Planner With a NC Programming System
Nieminen, Jukka; Tuomi, J.; Mäntylä, M.1993 Parametric Fixture Layout Models for Operative Process Planning
Opas, J.; Mäntylä, M.1993 Automatic Part Program Generation
Opas, J.; Mäntylä, M.1993 Main Joint Demonstration of GNOSIS Technical Work Package 1
Ranta, M.; Mäntylä, M.1993 Publications intended for the general public
Popular article, newspaper articleVain oikein ymmärretty Living Lab tuottaa tulosta
Mäntylä, Martti; Oulasvirta, Antti; Pitkänen, Olli2008 in Tekniikan näköalat (VALTIONEUVOSTON KANSLIA)
Onko Suomi jäämässä alustatalouden junasta?
Technology disruptions as enablers of organizational and social innovation in digitalized environment
Three Narratives on Digitalization
Finland - The Silicon Valley of Industrial Internet
Mobile Social Media for Groups
HIIT Annual Report 2006
Towards Ubiquitous Network Society
Is Your Neighbor a Traitor?Distributed Reputation Management in Member-Initiated Virtual Communities
On Addressing the Run-Cost Variance in Rondomized Motion Planners
On Addressing the Run-Cost Variance in Randomized Motion Planners
Assessing Legal Challenges on the Mobile Internet
Teollisuuden Internet-sovellutukset
Incremental Constraint Modelling in a Feature Modelling System
Integration of Constraint Propagation and Variational Geometry in a Feature-Based Modelling System
Challenges in Feature-Based Manufacturing Research
Knowledge Intensive CAD-1
Cutting and Pasting Constrained Boundary Features
Assembly Modeling on the Basis of a Mechanical Design Prototype
Delta Report and Handbook
A Lisp Interface to Geometric Modelling Operations
EXTDesign Version 1.0 Reference Manual
Introducing Blending Operations in Feature Models
Naive Physics Simulator
Representation of Process Planning Knowledge for Part Families
The MCOES Process Planning System
Towards Open Architecture Concurrent Engineering Frameworks
Problems in Integrating a Feature-Based Process Planner With a NC Programming System
Parametric Fixture Layout Models for Operative Process Planning
Automatic Part Program Generation
Main Joint Demonstration of GNOSIS Technical Work Package 1
Vain oikein ymmärretty Living Lab tuottaa tulosta
Read about executive education
Other experts
Ruth Bender
Ruth is Emeritus Professor of Corporate Financial Strategy, having researched and taught at Cranfield for many years. Prior to this she was a partner in Grant Thornton, where latterly she specialised in corporate finance. During this period she undertook various secondments, including a year wor...
Zachary Steinert Threlkeld
Zachary C. Steinert-Threlkeld is an assistant professor of Public Policy at the UCLA Luskin School of Public Affairs. His research interests are at the border of international and comparative politics, exploiting in particular vast social media data to study subnational conflict. His current re...
Benjamin Luippold
Academic Division: Accounting & LawBen Luippold is an associate professor in the Accounting and Law division. He currently teaches managerial accounting in the undergraduate Sophomore Management Experience (SME) curriculum and Measuring and Managing Strategic Performance in both its one-year ...
Looking for an expert?
Contact us and we'll find the best option for you.