Markku Hurme

Peer-reviewed scientific articles

Journal article-refereed, Original research

Influence of input waste feedstock on solid recovered fuel production in a mechanical treatment plant

Nasrullah, Muhammad; Hurme, Markku; Oinas, Pekka; Hannula, Janne; Vainikka, Pasi

2017 in FUEL PROCESSING TECHNOLOGY (Elsevier Science B.V.)

ISSN: 0378-3820

A hybrid approach for estimating fugitive emission rates in process development and design under incomplete knowledge

Ng, Rex T.L.; Hassim, Mimi H.; Hurme, Markku

2017 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

The solar transformity of heat and power in coproduction

Sha, Sha; Hurme, Markku

2017 in ECOLOGICAL ENGINEERING (Elsevier Science B.V.)

ISSN: 0925-8574

Cement Industry Greenhouse Gas Emissions - Management Options and Abatement Cost

Kajaste, Raili; Hurme, Markku

2016 in JOURNAL OF CLEANER PRODUCTION (ELSEVIER SCI LTD)

ISSN: 0959-6526

Inherently safer design review and their timing during chemical process development and design

Kidam, Kamarizan; Sahak, Haslinda A.; Hassim, Mimi H.; Shahlan, Siti S.; Hurme, Markku

2016 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Enhanced biofuel processes utilizing separate lignin and carbohydrate processing of lignocellulose

Melin, Kristian; Kohl, Thomas; Koskinen, Jukka; Hurme, Markku

2016 in BIOFUELS (Future Science)

ISSN: 1759-7269

Elemental balance of SRF production process solid recovered fuel produced from municipal solid waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Oinas, Pekka

2016 in WASTE MANAGEMENT AND RESEARCH (SAGE PUBLICATIONS LTD)

ISSN: 0734-242X

NOVEL TREATMENT METHOD FOR BLACK LIQUOR AND BIOMASS HYDROLYSATE WITH PARTIAL WET OXIDATION

Hassan, Raja; Melin, Kristian; Kuppa, Sarada; Koskinen, Jukka; Hurme, Markku; Del Carmen Villalba de Kokkonen, Daniela; Kallas, Juha

2015 in Cellulose Chemistry and Technology (Editura Academiei Romane)

ISSN: 0576-9787

Method for identifying errors in chemical process development and design base on accidents knowledge

Kidam, Kamarizan; Sahak, Haslinda A.; Hassim, Mimi H.; Hashim, Haslenda; Hurme, Markku

2015 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Performance of biofuel processes utilising separate lignin and carbohydrate processing

Melin, Kristian; Kohl, Thomas; Koskinen, Jukka; Hurme, Markku

2015 in BIORESOURCE TECHNOLOGY (ELSEVIER SCI LTD)

ISSN: 0960-8524

Elemental balance of SRF production process: Solid recovered fuel produced from construction and demolition waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Koskinen, Jukka

2015 in FUEL (Elsevier BV)

ISSN: 0016-2361

Mass, energy and material balances of SRF production process. Part 3: Solid recovered fuel produced from municipal solid waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Karki, Janne

2015 in WASTE MANAGEMENT AND RESEARCH (SAGE PUBLICATIONS LTD)

ISSN: 0734-242X

Elemental balance of SRF production process: Solid recovered fuel produced from commercial and industrial waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku

2015 in FUEL (Elsevier BV)

ISSN: 0016-2361

Designing an inherently healthier process based on inherently safer design (ISD) concept: research and development stage

Pandian, Santha; Hassim, Mimi H.; Ng, Rex T.L.; Hurme, Markku

2015 in CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (Springer Verlag)

ISSN: 1618-954X

Solar Energy Footprint of Ethylene Processes

Sha, Sha; Melin, Kristian; Villalba de Kokkonen, Daniela; Hurme, Markku

2015 in ECOLOGICAL ENGINEERING (Elsevier Science B.V.)

ISSN: 0925-8574

Accident prevention approach throughout process design life cycle

Kidam, K.; Hussin, N.E.; Hassan, O.; Ahmad, A.; Johari, A.; Hurme, M.

2014 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Accident Contributor Interconnection Study as a Basis for Accident Mechanism Prediction

Kidam, K.; Kamarden, H.; Hurme, Markku; Hassim, M.H.; Kasmani, R.M.

2014 in CHEMICAL ENGINEERING TRANSACTIONS (Institution of Chemical Engineers)

ISSN: 1974-9791

Mass, energy and material balances of SRF production process. Part 2: SRF produced from construction and demolition waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Karki, Janne

2014 in WASTE MANAGEMENT (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0956-053X

Mass, energy and material balances of SRF production process. Part 1: SRF produced from commercial and industrial waste

Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Karki, Janne

2014 in WASTE MANAGEMENT (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 0956-053X

A Heuristic Framework for Inherent Occupational Health Assessment in Chemical Process Design

Ng, Rex T.L.; Hassim, Mimi H.; Hurme, Markku

2014 in CHEMICAL ENGINEERING TRANSACTIONS (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 1974-9791

Computer Aided Estimation of Fugitive Emission Rates and Occupational Air Concentration in Process Design

Aziz, N.N.N.A.; Hassim, Mimi H.; Hurme, Markku

2013 in CHEMICAL ENGINEERING RESEARCH AND DESIGN (INST CHEMICAL ENGINEERS)

ISSN: 0263-8762

Simple graphical method for inherent occupational health assessment

Hassim, Mimi H.; Hurme, Markku; Edwards, D.W.; Aziz, N.; Rahim, F.

2013 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Analysis of equipment failures as contributors to chemical process accidents

Kidam, Kamarizan; Hurme, Markku

2013 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Method for identifying contributions to chemical process accidents

Kidam, Kamarizan; Hurme, Markku

2013 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Statistical analysis of contributors to chemical process accidents

Kidam, Kamarizan; Hurme, Markku

2013 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Computer-aided assessment of occupationally healthier processes during research and development stage

Pandian, Santha; Hassim, Mimi H.; Hurme, Markku

2013 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Computer aided solar emergy based sustainability evaluatins in process design

Sha, Sha; Melin, Kristian; Hurme, Markku

2013 in CHEMICAL ENGINEERING TRANSACTIONS (Elsevier BV)

ISSN: 1974-9791

Computer aided assessment of inherent occupational health hazards during research and development stage

Abbaszadeh, S.; Hassim, Mimi H.; Hurme, Markku; Kamsaini, R.

2012 in CHEMICAL ENGINEERING TRANSACTIONS (Elsevier BV)

ISSN: 1974-9791

Computer Aided Assessment and Design of Occupationally Healthier Process during Research and Development Stage

Abbaszadeha, S.; Hassim, Mimi H.; Hurme, Markku; Kasmania, R.M.

2012 in CHEMICAL ENGINEERING TRANSACTIONS (Elsevier BV)

ISSN: 1974-9791

Fugitive emissions in chemical processes.The assessment and prevention based on inherent and add-on approaches

Hassim, Mimi H.; Hurme, Markku; Amyotte, P.; Khan, F.I.

2012 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Computer Aided Estimation of Fugitive Emission Rates and Occupational Air Concentration in Process Design

Hassim, Mimi H.; Hurme, Markku; Aziz, N.N.A.

2012 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

ISSN: 1570-7946

Chemical Engineering Education and Industry Megatrends

Heinänen, Victor; Seuranen, Timo; Hurme, Markku

2012 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

ISSN: 1570-7946

Effect of cencentration and temperature on the properties of the microspheres prepared using an emulsion-solvent extraction process

Heiskanen, Harri; Denifi, P.; Pitkänen, P.; Hurme, Markku

2012 in ADVANCED POWDER TECHNOLOGY (Elsevier BV)

ISSN: 0921-8831

Effect of Physical Properties and Emulsification Conditions on the Microsphere Size Prepared Using a Solvent Extraction Process

Heiskanen, Harri; Denifl, Peter; Hurme, Markku; Pitkanen, Paivi; Oksman, Marita

2012 in JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (Taylor and Francis Ltd.)

ISSN: 0193-2691

Effect of preparation conditions on the properties of the microsphere prepared using an emulsion solvent extraction process

Heiskanen, Harri; Denifi, P.; Pitkänen, P.; Hurme, Markku

2012 in CHEMICAL ENGINEERING RESEARCH AND DESIGN (INST CHEMICAL ENGINEERS)

ISSN: 0263-8762

Origin of equipment design and operation errors

Kidam, Kamarizan; Hurme, Markku

2012 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Design as a contributor to chemical process accidents

Kidam, Kamarizan; Hurme, Markku

2012 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Computer aided assessment of occupationally healthier processes during research and development stage

Pandian, S.; Hassim, Mimi H.; Hurme, Markku

2012 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

ISSN: 1570-7946

Emergy evaluation of combined heat and power processes

Sha, Sha; Hurme, Markku

2012 in APPLIED THERMAL ENGINEERING (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 1359-4311

Emergy evaluation of combined heat and power plant processes

Sha, Sha; Hurme, Markku

2012 in APPLIED THERMAL ENGINEERING (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 1359-4311

Lignocellulosic biorefinery economic evaluation

Melin, Kristian; Hurme, Markku

2011 in Cellulose Chemistry and Technology (Editura Academiei Romane)

ISSN: 0576-9787

Efficient Integration of Biofuel and Chemical Production Processes with Pulp Mills and Energy Production

Melin, Kristian; Hurme, Markku; Parvinen, Kari

2011 in CHEMICAL ENGINEERING TRANSACTIONS (Editura Academiei Romane)

ISSN: 1974-9791

Process Synthesis Principles in the Chromatographic Separation of Sugars from Biomass Hydrolysates

Saari, Pia; Hurme, Markku

2011 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Study on the retention of glycinebetaine on a weak acid cation exchange resin

Saari, Pia; Paananen, Hannu; Hurme, Markku

2011 in JOURNAL OF LIQUID CHROMATOGRAPHY AND RELATED TECHNOLOGIES (Taylor and Francis Ltd.)

ISSN: 1082-6076

Renewable Energy Based Environmental Accounting of Heat, Power and Steel Production

Sha, Sha; Losowska, Magdalena; Hurme, Markku

2011 in CHEMICAL ENGINEERING TRANSACTIONS (Taylor and Francis Ltd.)

ISSN: 1974-9791

Economic Comparison of Diagnostic Antibody Production in Perfusion Stirred Tank and in Hollow Fiber Bioreactor Processes

Vermasvuori, Raisa; Hurme, Markku

2011 in Biotechnology Progress (Wiley-Blackwell)

ISSN: 8756-7938

Inherent occupational health assessment during basic engineering stage

Hassim, Mimi H.; Hurme, Markku

2010 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Occupational chemical exposure and risk estimation in process development and design

Hassim, Mimi H.; Hurme, Markku

2010 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Estimation of chemical concentration due to fugitive emissions during chemical process design

Hassim, Mimi H.; Perez, Alberto L.; Hurme, Markku

2010 in PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (Institution of Chemical Engineers)

ISSN: 0957-5820

Introduction to occupational inherent health concept from chemical process perspective

Hassim, Mimi; Hurme, Markku

2010 in JOURNAL OF THE INSTITUTE OF ENGINEERS, MALAYSIA (Institution of Chemical Engineers)

ISSN: 0126-513X

Inherent occupational health assessment during process research and development stage

Hassim, Mimi H.; Hurme, Markku

2010 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Inferent occupational health assessment during preliminary design stage

Hassim, Mimi; Hurme, Markku

2010 in JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (Elsevier BV)

ISSN: 0950-4230

Effect of Emulsification Conditions on the Properties of Microspheres Prepared by a Solvent Extraction Process

Heiskanen, Harri; Denifl, Peter; Hurme, Markku; Pitkänen, Päivi

2010 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Novel preparation and properties of microspheres involving a hydrocarbon-perfluorocarbon solvent extraction process

Heiskanen, Harri; Denifl, Peter; Hurme, Markku; Pitkänen, Päivi

2010 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Evaluation of lignocellulosic biomass upgrading routes to fuels and chemicals

Melin, Kristian; Hurme, Markku

2010 in Cellulose Chemistry and Technology (Editura Academiei Romane)

ISSN: 0576-9787

Biorefining route assessment by multilevel modeling

Melin, Kristian; Hurme, Markku

2010 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

ISSN: 1570-7946

Study on Industrial Scale Chromatographic Separation Methods of Galactose from Biomass Hydrolysates

Saari, Pia; Hakka, Katja; Jumppanen, Juho; Heikkila, Heikki; Hurme, Markku

2010 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Adsorption Equilibria of Arabinose, Fructose, Galactose, Glucose, Mannose, Rhamnose, Sucrose, and Xylose on Ion-Exchange Resins

Saari, Pia; Heikkilä, Heikki; Hurme, Markku

2010 in JOURNAL OF CHEMICAL AND ENGINEERING DATA (AMER CHEMICAL SOC)

ISSN: 0021-9568

Evaluating the efficiency of integrated systems in the process industry Case: Steam cracker

Tuomaala, Mari; Hurme, Markku; Leino, Anna-Maija

2010 in APPLIED THERMAL ENGINEERING (PERGAMON-ELSEVIER SCIENCE LTD)

ISSN: 1359-4311

Computer aided chemical exposure estimation in process design

Hassim, Mimi; Hurme, Markku

2009 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

A Novel Chromatographic Production Scale Separation Process for L-Fucose

Saari, Pia; Hakka, Katja; Heikkila, Heikki; Jumppanen, Juho; Hurme, Markku

2009 in JOURNAL OF LIQUID CHROMATOGRAPHY AND RELATED TECHNOLOGIES (Taylor and Francis Ltd.)

ISSN: 1082-6076

Inherent EHS Consideration in Process Development

Hassim, Mimi; Grönlund, Miina; Hurme, Markku

2008 in CHEMICAL ENGINEERING TRANSACTIONS (Taylor and Francis Ltd.)

ISSN: 1974-9791

Computer Aided Desing of Occupationally Heathier Processes

Hassim, Mimi; Hurme, Markku

2008 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

Enhancement of Inherent Safety in Chemical Industry

Kidam, Kamarizan; Hassi, Mimi; Hurme, Markku

2008 in CHEMICAL ENGINEERING TRANSACTIONS (Elsevier)

ISSN: 1974-9791

Lifecycle Assessment of Process Concepts

Cziner, Krisztina; Hassim, Mimi; Hurme, Markku

2006 in CHEMICAL ENGINEERING TRANSACTIONS (Elsevier)

ISSN: 1974-9791

´Multicriteria decision making in process integration

Cziner, Krisztina; Tuomaala, Mari; Hurme, Markku

2005 in JOURNAL OF CLEANER PRODUCTION (ELSEVIER SCI LTD)

Evaluate Approach for Process Development

Cziner, Krisztina; Virkki-Hatakka, Terhi; Hurme, Markku; Turunen, Ilkka

2005 in Chemical Engineering and Technology (Wiley-VCH Verlag)

ISSN: 0930-7516

Implementing inherent safety throughout process lifecycle

Hurme, Markku; Rahman, Mostafizur

2005 in Journal of Loss Prevention (Wiley-VCH Verlag)

Comparison of inherent safety indices in process concept evaluation

Rahman, Mostafizur; Heikkilä, Anna-Mari; Hurme, Markku

2005 in Journal of Loss Prevention (Wiley-VCH Verlag)

Automated Process Design Using Web-Service based Parameterised Constructors

Seuranen, Timo; Hurme, Markku

2005 in COMPUTER AIDED CHEMICAL ENGINEERING (Elsevier)

ISSN: 1570-7946

Synthesis of separation by case-based reasoning

Seuranen, Timo; Hurme, Markku; Pajula, Elina

2005 in Computers and Chemical Engineering (Elsevier BV)

ISSN: 0098-1354

Chemical pulp production; focus on the environmentally friendly and economical modern processes

Ehtonen, Pekka; Sarwar, Golam; Hurme, Markku

2004 in Paperi ja Puu (Elsevier BV)

Studies on a chemically balanced elemental chlorine free (ECF) pulp mill

Sarwar, Golam; Ehtonen, Pekka; Hurme, Markku

2003 in Pulp & Paper Canada (Elsevier BV)

The effect of initial drop size on prticle size in the supercritical antisolvent precipitation (SAS) technique

Rantakylä, M.; Jäntti, M.; Aaltonen, O.; Hurme, Markku

2002 in JOURNAL OF SUPERCRITICAL FLUIDS (Elsevier)

ISSN: 0896-8446

Synthesis of separation processes by using case-based reasoning

Pajula, Elina; Seuranen, Timo; Koiranen, Tuomas; Hurme, Markku

2001 in Computers and Chemical Engineering (Elsevier BV)

Dynamic Simulation of the Behaviour of Pressure Relief Systems

Pokki, Juha-Pekka; Aittamaa, Juhani; Hurme, Markku

2001 in Computers and Chemical Engineering (Elsevier BV)

Computer Aided Process Equipment Design from Equipment Parts

Pajula, E.; Koiranen, T.; Seuranen, T.; Hurme, M.

1999 in Computers and Chemical Engineering (Elsevier BV)

Modelling Emergency Relief for Processes at Near Critical Conditions

Pokki, J-P.; Aittamaa, J.; Keskinen, K.I.; Hurme, M.

1999 in Computers and Chemical Engineering (Elsevier BV)

Synthesis of qualitative models by using intelligent feedback

Hurme, Markku

1998 in Computers & Chemical Engineering (Elsevier BV)

Techno-Economic Assessment of Integrated Community and Commercial Solid Wastes Utilization Process Cases

Sarwar, Golam; Hurme, M.

1997 in Acta Polytechnica Scandinavica (Elsevier BV)

Safety consideration in process synthesis

Heikkilä, A-M.; Hurme, M.; Järveläinen, M.

1996 in Computers & Chemical Engineering (Elsevier BV)

Combined Process Synthesis and Simulation System for Feasibility Studies

Hurme, M.; Järveläinen, M.

1995 in Computers and Chemical Engineering (Elsevier BV)

Qualitative decision support system for cold box operation

Hurme, Markku; Dohnal, M.; Järveläinen, M.

1994 in Computers and Chemical Engineering (Elsevier BV)

Qualitative reasoning and optimization of chemical engineering processes

Hurme, M.

1993 in Acta Polytechnica Scandinavica (Elsevier BV)

Qualitative Reasoning in Chemical and Safety Engineering

Hurme, M.; Dohnal, M.; Järveläinen, M.

1993 in Computers and Chemical Engineering (Elsevier BV)

A qualitative commonsense method for optimization of complex engineering systems

Hurme, M.; Parsons, S.; Dohnal, M.; Järveläinen, M.

1993 in ENGINEERING OPTIMIZATION (Taylor and Francis Ltd.)

Book section, Chapters in research books

Fuzzy Reasoning in Process Plant Design

Hurme, M.; Järveläinen, M.

1994

Conference proceedings

Cement Industry Greenhouse Gas Emissions - Management Options and Abatement Cost

Kajaste, Raili; Hurme, Markku

2014

ISSN: 0000-0000

The solar transformity of power and heat in combined heat and power production

Sha, Sha; Hurme, Markku

2014

ISSN: 0000-0000

Comparison of Methods for Assessing Environmental Safety of Chemical Prosesses during Process Design

Abbaszadeh, S.; Hassim, Mimi H.; Hurme, Markku

2013

A Systematic Framework for Designing an Inherently Heathier Process during Research and Development Stage

Hassim, Mimi H.; Hurme, Markku

2013

Hierarchy of control in accident preventon

Kidam, Kamarizan; Hurme, Markku

2013

Current Issues and Challenges of Loss Prevention in the Chemical Process Industry

Kidam, Kamarizan; Ahmad, A.; Hassan, O.; Hurme, Markku

2013

Utilization of byproduct streams treated by wet oxidation

Melin, Kristian; Kuppa, Sarada; Mudassar, Raja; Koskinen, Jukka; Hurme, Markku

2012

ISBN: 978-951-38-7880-1

Novel treatment method for black-liquor and biomass hydrolysate with partial wet oxidation and subsequent chemical conversion

Mudassar, Raja; Melin, Kristian; Sarada, Kuppa; Koskinen, Jukka; Hurme, Markku; Kallas, Juha

2012

Inherent health consideration for worker's protection in chemical plants

Hassim, Mimi H.; Hurme, Markku; Kidam, Kamarizan

2010 in Chemical Engineering Transactions (AIDIC (the Italian Association of Chemical Engineering))

ISBN: 9788895608112

ISSN: 2283-9216

Technical Analysis of Accident in Chemical Process Industry and Lessons Learnt

Kidam, Kamarizan; Hurme, Markku; Hassim, Mimi H.

2010 in Chemical Engineering Transactions (AIDIC SERVIZI SRL)

ISSN: 1974-9791

Quantification of Fugitive Emissions for Proposed Inherent Safety Plants

Hassim, Mimi; Hurme, Markku

2008

Estimation of Exposure Concentration during the Desing Stage of Chemical Processes

Hassim, Mimi; Hurme, Markku

2008

ISBN: 978-0-9559952-0-0

Occupational Health Consideration in Chemical Process Design

Hassim, Mimi; Hurme, Markku

2008

Accident Prevention: Practicing Inherent Safety

Kidam, Kamarizan; Hurme, Markku

2008

An Evaluation of Safety Indices for Subprocesses at Early Process Development

Kidam, Kamarizan; Hurme, Markku

2008

ISBN: 978-0-9559952-0-0

Conceptual approach to process integration efficiency in chemical industry case: Energy efficiency of a steam cracker

Tuomaala, Mari; Leino, Anna-Maija; Hurme, Markku

2008

ISBN: 978-80-02-02051-6

Multicriteria Design of Separation Sequences by Including HSE Criteria and Uncertainty

Cziner, Krisztina; Hassim, Mimi; Hurme, Markku

2006

Assessing the Inherent Occupational Health Hazards During the Conceptual Design Phase

Hassim, Mimi; Edwards, D.; Hurme, Markku

2006

Assessment of Chemical Production Concepts in Process Design

Cziner, Krisztina; Hurme, Markku

2005

Process Efficiency by Comprehensive Process Integration

Hurme, Markku; Tuomaala, Mari; Ahtila, Pekka

2005

On-site Integrated Production of Chemicals at the ECF Kraft Pulp Mill

Sarwar, Golam; Ehtonen, Pekka; Hurme, Markku

2005

A New method to evaluate integrated process design - case biomass drying using a plant´s available heat sources

Tuomaala, Mari; Holmberg, Henrik; Ahtila, Pekka; Hurme, Markku

2005

Synthesis of separation sequences by case-based reasoning

Hurme, Markku; Seuranen, Timo

2004

Implementing inherent safety throughout process lifecycle

Hurme, Markku; Rahman, M.

2004

Investment evaluation of an integrated steel mill using multiple criteria

Kekkonen, Marko; Tuomaala, Mari; Holappa, Lauri; Hurme, Markku; Ahtila, Pekka

2004

Comparison of inherent safety indices in process concept evaluation

Rahman, M.; Heikkilä, A.-M.; Hurme, M.

2004

Phenomena-based methodology for process intesification

Rong, B.-G.; Kolehmainen, E.; Turunen, Ilkka; Hurme, Markku

2004

Decision analysis as a project management tool for product and process design

Virkki-Hatakka, T.; Cziner, Krisztina; Turunen, Ilkka; Hurme, Markku

2004

Process Evaluation and Synthesis by Analytic Hierarchy Process Combined with Genetic Optimization

Cziner, Krisztina; Hurme, Markku

2003

General Approach to Connect Business and Engineering Decisions in Plant Design

Hurme, M.; Tuomaala, M.; Turunen, I.

2003

Evaluation Based Method for Process Development

Virkki-Hatakka, T.; Rong, B.G.; Cziner, Krisztina; Hurme, Markku; Turunen, Ilkka

2003

Modeling at different stages of process life-cycle

Virkki-Hatakka, T.; Rong, B.G.; Cziner, Krisztina; Hurme, Markku; Turunen, Ilkka

2003

Multicriteria decision making in process integration

Cziner, Krisztina; Tuomaala, Mari; Hurme, Markku

2002

Internet-based equipment and model gallery

Nappa, Marja; Karhela, T; Hurme, Markku

2002

Cost study of a supercritical antisolvent (SAS) particle production process

Rantakylä, M.; Aaltonen, O.; Hurme, Markku

2002

The estimation of capital costs of a supercritical antisolvent (SAS) particle production process

Rantakylä, M; Aaltonen, O; Hurme, Markku

2002

Synthesis of azeotropic separation systems by case-based reasoning

Seuranen, Timo; Pajula, Elina; Hurme, Markku

2002

Case-based reasoning for separation process synthesis

Seuranen, Timo; Pajula, Elina; Hurme, Markku

2002

Upgradings activated sludge process using support media

Haimi, H.; Villareal, A.; Hurme, M.; Sillanpää, M.

2001

Separation sequencing by case-basead reasoning

Hurme, M.; Pajula, E.; Seuranen, T.

2001

Selection of separation sequences by case-based reasoning

Pajula, Elina; Seuranen, Timo; Hurme, Markku

2001

Applying CBR and Object Database Techniques in Chemical Process Design

Seuranen, T.; Pajula, E.; Hurme, M.

2001

Design of inherently safer processes by using object database

Seuranen, T.; Pajula, E.; Hurme, M.

2001

Analysis of process performance in process integration

Tuomaala, M.; Hurme, M.; Hippinen, I.; Ahtila, P.; Turunen, I.

2001

Studies on an ecologically balanced pulp mill

Ehtonen, P.; Golam, S.; Hurme, M.

2000

On the selection of chlorine dioxide process

Ehtonen, P.; Golam, S.; Hurme, M.

2000

Synthesis of Separation Processes by Using Case-Based Reasoning

Pajula, E.; Seuranen, T.; Koiranen, T.; Hurme, M.

2000

Dynamic Simulation of the Behaviour of Pressure Relief Systems

Pokki, J-P.; Aittamaa, J.; Hurme, M.

2000

Case-based reasoning applied in synthesis of separation processes

Seuranen, T.; Pajula, E.; Koiranen, T.; Hurme, M.

2000

Conceptual Design of Inherent Safer Processes by Genetic Algorithms and Case-Based Reasoning

Hurme, M.; Heikkilä, A-M.

1999

Equipment safety as a part of inherent safetyy index for preliminary process design

Heikkilä, A-M.; Hurme, M.

1998

Application of case-based reasoning to safety evaluation of process configuration

Heikkilä, A-M.; Koiranen, T.; Hurme, M.

1998

Application of case-based reasoning to safety evaluation of process configuration

Heikkilä, A-M.; Koiranen, T.; Hurme, M

1998

Inherent safety index for offsite equipment in preliminary process design

Heikkilä, A-M.; Hurme, M.

1998

Application of genetic optimization and case-based reasoning for synthesis of inherently safer chemical processes

Hurme, M.; Heikkilä, A-M.

1998

Conceptual Design of Clean Processes

Hurme, M.

1998

Synthesis of inherently safe chemical processes by using genetic optimization and case-based reasoning

Hurme, M.; Heikkilä, A-M.

1998

Development of relief simulator for near critical fluids

Pokki, J-P.; Hurme, M.; Aittamaa, J.

1998

Methodology for Conceptual Design of Clean Processes

Hurme, M.

1997

Waste Minimization in Fine Chemical and Biotechnical Processes

Hurme, Markku

1997

Intelligent Data Management System for Detailed Process Design

Hurme, M.

1997

Case-based Reasoning Applications in Process Equipment Selection and Design

Koiranen, T.; Hurme, M.

1997

Wood Ash Utilization and Granulation to Fertilizers

Sarwar, G.; Hurme, M.

1997

Conseptual Design of Clean Processes; Tools and Methods

Hurme, M.

1996

Separation Process Synthesis with Genetic Algorithm

Hurme, M.

1996

A Method for Calculation of Flow Turbulence with Random Numbers

Laine, J.; Hurme, M.

1996

Air Gasification of Solid Waste and Production of Transportation Fuels

Golam, S.; Hurme, M.; Järveläinen, M.

1995

Neural Network System for Process Optimization and Decision Support

Hurme, M.

1995

Integrating Simulation and AI-techniques in Engineering Design

Hurme, M.; Järveläinen, M.

1994

Qualitative Modelling of Steady State Processes

Hurme, M.; Järveläinen, M.

1994

Fuzzy Reasoning in Plant Design

Hurme, M.; Järveläinen, M.

1994

Improving Process Design Reliability with Random Input Variables

Laine, J.; Hurme, M.

1994

Qualitative reasoning applications to process industry

Hurme, M.; Dohnal, M.; Järveläinen, M.

1992

Scientific books (monographs)

Book (editor)

Proceedings of the Third Nordic Symposium on Reactive Separation Systems

Hurme, M.

1997

Publications intended for professional communities

Article in professional journal

Geneettiset algoritmit kemiassa - optimointia vaihtoehtoja karsimalla

Alander, J.T.; Hurme, M.

2000 in KEMIA - KEMI (Kempulssi Oy)

Maaperä puhtaaksi sähköllä. Saastuneiden maiden elektrokineettinen kunnostus matkalla laboratoriosta käytäntöön

Latostenmaa, P.; Sillanpää, M.E.; Määttä, R.; Hurme, M.

2000 in YMPÄRISTÖ JA TERVEYS (Kempulssi Oy)

Ympäristöä säästävän sellu- ja polttotekniikan uudet haasteet (New challenges of environmentally friendly pulp and combustion technology)

Hurme, M.

1995 in KEMIA - KEMI (Kempulssi Oy)

Article in professional conference proceedings

Inherently Safer Design Review at Different Stages of Chemical Process Development and Design

Kamarizan, Kidam; Hurme, Markku; Hassim, Mimi Haryani

2014

Assessing inherent occupational health aspect during chemical process design

Hassim, Mimi; Hurme, Markku

2011

Published development or research report

Chemicals and lignin from black liquor by a wet oxidation process

Melin, Kristian; Mudassar, Raja Hassan; Hurme, Markku; Koskinen, Jukka; Kallas, Juha

2011

Technoeconomical study of bio-SNG production from lignocellulosic biomass

Melin, Kristian; Hurme, Markku

2011

Lignocellulosic biorefining optimisation

Melin, Kristian; Hurme, Markku

2011

Process for hydrogen production via formate

Mudassar, Hassan Raja; Melin, Johan Kristian; Hurme, Markku

2011

Sustainable process design

Hurme, Markku

2006

Prosessikehitys ja scale up: Prosessisuunnittelu

Hurme, Markku

2005

Prosessikehitys ja scale-up: Yksikköoperaatiot

Hurme, Markku

2005

Prosessien energiatalouden ja päästöjen optimointi, Prosessikehityspäivä

Hurme, Markku

2005

Prosessikehitys ja scale-up: Ympäristökysymykset ja turvallisuus

Hurme, Markku

2005

Prosessikehitys ja scale-up: Bioprosessit

Hurme, Markku

2005

Inherent Safety Evaluation of MMS Process Concepts

Rahman, M.; Heikkilä, Anna-Mari; Hurme, Markku

2005

Inherent safety index evaluation of methyl methacrylate process concepts

Rahman, Mostafizur; Heikkilä, Anna-Mari; Hurme, Markku

2005

Kemometrian käyttö aktiivilietelaitosten tutkimuksessa

Haimi, Henri; Hurme, Markku

2004

Uuden jätevedenpuhdistusprosessin testaus

Haimi, Henri; Villarreal, Antonio; Hurme, Markku

2003

Inherent safety and process design, a literature study

Martina, C.; Cziner, K.; Hurme, M.

2001

Studies on an ecologically balanced ECF pulp mill

Ehtonen, P.; Golam, S.; Hurme, M.

2000

Application of fuzzy methodology in process plant design

Hurme, M.

1997

Kehittyvät erotusmenetelmät.Prosessikehityspäivät 1996

Hurme, M.

1997

Approaches of qualitative process modelling

Hurme, M.

1997

Case-Based Reasoning Prototype System for Equipment Selection: Fluid Mixer Example

Koiranen, T.; Hurme, M.

1997

Case-Based Reasoning Prototype system for Equipmment Selection Fluid Mixer Example

Koiranen, T.; Hurme, M.

1997

Integrated Chemical Plants at the Pulp Mill

Ehtonen, P.; Hurme, M.; Järveläinen, M.

1995

Process for Utilization or Disposal of Municipal Solid Waste via Acid Hydrolysis

Golam, S.; Ehtonen, P.; Hurme, M.; Järveläinen, M.

1995

Ympäristöystävällinen sellu- ja polttotekniikka (Environmentally friendly pulp and combustion technology)

Hurme, M.

1995

Erotusprosessin valinta (Selection of Separation Process)

Hurme, M.

1995

Selluloosatehtaan tuotannon ohjaus (Scheduling of Pulp Production)

Hurme, M.

1995

Chemical Reactor Design for Waste Minimization

Hurme, M.

1995

Advances of decision support systems in process design and operation

Hurme, M.

1995

Ympäristöä säästävän sellu- ja polttotekniikan uudet haasteet Advances of decision support systems in process design and operation

Hurme, M.

1995

Erotusprosessin valinta

Hurme, M.

1994

Teollisuuden päästö- ja pitoisuusmittaukset

Hurme, M.

1994

Fuzziness in Finland 1994

Hurme, Markku

1994

Prosessikehityspäivät 1993

Hurme, M.

1993

Qualitative vector optimization of a condensate stripping process

Hurme, M.; Dohnalova, J.; Dohnal, M.

1993

Chemical Engineering Seminar 1993

Hurme, M.

1993

Improving process design reliability with random input variables

Laine, Jouko; Hurme, M.

1993

Tislauskolonnin paineensäätö

Hurme, M.

1992

Studies on qualitative reasoning and optimisation in chemical engineering

Hurme, M.

1992

Extended abstracts of presentations of the petroleum technology seminar

Hurme, M.

1992